null

MADE IN THE USA

Protect the underside for your Jeep with one of many GenRight Skid Plates in Steel or Aluminum.

30 of 30 Items
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
  • Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate

    GenRight

    Jeep TJ/LJ Steering Box Skid Plate

       This is the GenRight Steering Box Skid Plate to fit any '97-06' Jeep Wrangler TJ. Designed to protect the steering box and sector shaft from damage due to hitting obstacles on the trail. Features: Works with aftermarket front...

    $79.99
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
  • GenRight windshield guards for the Jeep Wrangler TJ or LJ Here you can see they are fitted nicely to the windshield frame Fitted nicely to the windshield frame and clean! They go all the way up to the rubber seal at the top

    GenRight

    Windshield Guards for the Jeep TJ/LJ

    This is the GenRight Off Road windshield guards for all models of the the Jeep Wrangler TJ or LJ (1997 - 2006).This newest version goes up higher than previously and are the best fitting windshield guards on the market!These are a nice way to protect...

    $249.99
  • GenRight's Differential Skid Plate Guard for the Currie Rock Jock Rock Jock 60 & 70 Differential Skid Plate Guard Installed here on our Terremoto Jeep JK front axle, it keeps the bolts protected Shown here on our Jeep rear axle, it keeps the Jock Strap skid from getting ripped off We have used this Guard to protect the leading edge & bolts on our Rock Jock for years!

    GenRight

    Chin Strap for Currie 60 or 70 Diff Skid Plates

    Have you ever ripped off the bolts that hold the diff skid on your Rock Jock axle? Well after going through the trouble to dig out the busted off bolt you will want this! This is our "Chin Strap". It is a Guard GenRight developed from racing at KOH...

    $49.99
  • Steel belly up skid plate for the Jeep Wrangler TJ or LJ Gain a massive amount of ground clearance with this skit plate Here you can see how it only drops in the middle where it has to Shown here with our double triangulated rear cross member Stock '06 Rubicon transfer case skid and transmission mount

    GenRight

    TJ Belly Up Skid Plate - Steel

    This is the STEEL GenRight Belly Up transfer case skid plate for a Jeep Wrangler TJ or LJ. Features: Replacing the factory skid plate with a lower-profile and more heavy duty skid plate. Increases your ground clearance by up to 2-3/8" inches. This...

    $599.99
  • Rear Bumper Rash Guards for the sides of the GenRight Aluminum rear bumper This is the high impact area where the Rash Guard mounts on the rear bumper Shown here on the Terremoto Jeep JK, they are almost invisible The Rash Guards can be painted to add accent color to your Jeep build Even Tony runs the Rash Guards on the Terremoto to protect the rear bumper

    GenRight

    Rash Guard for Aluminum JK Rear Bumper, SIDES

    This is the SIDE pieces of the "Rash Guard" for the GenRight Off Road Aluminum JK rear bumper. Now you can keep the lightweight but have the protection & durability in the high contact areas! Made of 3/16" thick cold rolled steel the Rash...

    $99.99
  • GenRight Rash Guard caps the high impact area of the aluminum rocker guard This is how the Rash Guard caps the high impact area of the aluminum rocker guard The Rash Guards can be painted to add accent color to your Jeep build Flush mount stainless bolts keep the bottom side of the rash guard smooth Even Tony uses the Rash Guards on his Terremoto Jeep JK

    GenRight

    JK 4 Door "Rash Guards" for GR Rocker Guards

    This is the "Rash Guard" for the GenRight 4 door Aluminum Rocker Guards. It is the answer for the weight conscious Jeep owner who wants lightweight but off-road capability! It is a formed steel "cap" to protect the high...

    $299.99
  • GenRight Rash Guard for the Middle section of the aluminum rear bumper GenRight Rash Guard for the Middle section of the aluminum rear bumper GenRight Rash Guard for the Middle section of the aluminum rear bumper The Rash Guard is almost invisible, as it protects the high impact area of the rear bumper Rash Guards can be painted to add accent colors to your Jeep build

    GenRight

    Rash Guard for Aluminum JK Rear Bumper, CENTER

    This is the CENTER of the "Rash Guard" piece for the GenRight Off Road Aluminum JK rear bumper. Now you can keep the lightweight but have the protection & durability in the high contact areas! Made of 3/16" thick cold rolled steel the Rash...

    $119.99
  • Rash Guard for the bottom of the GenRight Aluminum front bumper It mounts here to protect the most vulnerable areas from being damaged Even Tony runs the Rash Guard on the front bumper on the Terremoto Jeep JK The Rash Guards can be painted to add accent colors to your Jeep build

    GenRight

    Rash Guard for the JK Aluminum Front Bumper

    This is the "Rash Guard" for the GenRight Off Road JK Stubby Aluminum Front Bumper(s)! Now you can have the best of both worlds, lightweight of aluminum and the durability of steel with this 3/16" thick steel "Rash Guard". It...

    $199.99
  • 3/16" thick Aluminum cover for your tail gate.

    GenRight

    TJ / LJ Aluminum Tailgate Cover

    This is the new Aluminum Tailgate Armor from GenRight Off Road for the Jeep 1997 - 2006 TJ or LJ. It is designed to cover your factory swing out tailgate and match the thickness of your corner guards. Sold as a "cover", it has cut outs for the factory...

    $299.99
  • Gas Tank Skid Plate for the Jeep CJ-7 How the skid plate look on Jeep with Leaf Springs

    GenRight

    Crawlerâ„¢ Skid Plate - CJ

    This is the GenRight Crawler™ Heavy Duty 3/16" thick gas tank skid plate for the Jeep CJ-7 (1974 to 1986). It will fit the stock 20 gallon plastic gas tank or it can be upgraded at a later date to our 20 gallon aluminum Crawler Enduro tank...

    $499.99
  • Gas tank skid plate for the Jeep Wrangler TJ or LJ

    GenRight

    Crawlerâ„¢ Skid Plate - TJ/LJ

    This is the GenRight Crawler Gas tank skid plate for the Jeep TJ or Jeep LJ Unlimited. FEATURES: Heavy Duty replaces your stock skid plate to better protect the stock gas tank from being damaged New design has a dimple in center for proper fit of...

    $499.99
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

    This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to protect the...

    $599.99
  • Gain a massive amount of ground clearance with this belly up skid plate Here you can see how tucked up the skid plate is! Shown here with our double triangulated rear cross member You can see how it only drops down where it needs to

    GenRight

    TJ Belly Up Skid Plate - Aluminum

    This is the New GenRight Aluminum Belly Up transfer case skid plate for a Jeep Wrangler TJ or LJ. It increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile and more heavy duty skid plate. This...

    $699.99
  • Gas Tank Skid Plate for the Jeep Wrangler YJ How the skid plate look on Jeep with Leaf Springs

    GenRight

    Crawlerâ„¢ Skid Plate - YJ

    This is the GenRight "Crawler" gas tank skid plate to protect the stock Jeep YJ 20 gallon plastic gas tank. FEATURES: Heavy Duty replacement skid plate to protect the stock gas tank Excellent drainage in the corners More ground clearance than...

    $499.99
  • BMT-4001 GenRight's Hi-Clearance Body Mount Kit for the Jeep YJ Here you can see the difference between stock and GenRight's The same body mounts Tony had on his Growler YJ

    GenRight

    Body Mount LIFT Kit, YJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on either side (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
  • Updated GenRight Jeep JK Windshield Armor w/ Hardware Fits really nice!

    GenRight

    Updated Jeep JK Windshield Armor

    This is GenRight Off Road's newest and best fitting windshield guard for the Jeep Wrangler JK & JKU. Now you can protect the windshield frame on your Jeep JK with Windshield Armor from GenRight. Fits all models of the Jeep Wrangler JK...

    $249.99
  • Jeep YJ Steering Box Skid Plate GenRight Steering Box skid plate on the Growler YJ Side view of the GenRight steering box skid plate Jeep YJ Steering Box Skid Plate

    GenRight

    Jeep YJ Steering Box Skid Plate

    This is the GenRight Steering Box Skid Plate to fit any '87-95' Jeep Wrangler YJ. It is designed to protect the steering box housing and sector shaft from damage due to hitting obstacles on the trail.Features: Works with aftermarket front...

    $79.99
  • Gain a massive amount of ground clearance with this Belly Up skid plate Here you can see how tucked up this skid plate is! Shown here with our rear double triangulated cross member It only drops down where it needs to Skid plate comes with a brace that must be welded on by the installed

    GenRight

    YJ Belly Up Skid Plate - Steel

    This is the STEEL GenRight Belly Up transfer case skid plate for a Jeep Wrangler YJ. It increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile and more heavy duty skid plate. This high...

    $599.99
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
  • Gain a massive amount of ground clearance on your YJ with this belly up skid Here you can see how tucked up this skid plate is! Shown here with our double triangulated rear cross member You can see here how it drops just where it needs to

    GenRight

    YJ Belly Up Skid Plate - Aluminum

    This is the GenRight Aluminum Belly Up transfer case skid plate for a Jeep Wrangler YJ. It increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile and more heavy duty skid plate. This high...

    $699.99
  • Rash Guards for the GenRight 2 door Aluminum Rocker Guards Here is how the Rash Guards caps the aluminum rocker like a glove! Fits right on the high exposure area of the rocker guard

    GenRight

    JK 2 Door "Rash Guards" for GR Rocker Guards

      This is the "Rash Guard" for the GenRight 2 door Aluminum Rocker Guards. It is the answer for the weight conscious Jeep owner who wants lightweight but off-road capability!It is a formed steel "cap" to protect the...

    $299.99
  • JK Transfer Case Skid 1/4" Aluminum JK Transfer Case Skid 1/4" Aluminum

    GenRight

    JK Transfer Case Skid 1/4" Aluminum

    This is the New hi-clearance GenRight Aluminum Transfer Case (or "Belly") skid plate for a Jeep Wrangler JK with a conventional aftermarket (Not GenRight) suspension (or lift kit) on it. NOTE: It can not be used with the stock gas...

    $999.99
  • JK (2 Door) Belly Up Skid 3/8" 7075 Aluminum JK (2 Door) Belly Up Skid 3/8" 7075 Aluminum JK (2 Door) Belly Up Skid 3/8" 7075 Aluminum

    GenRight

    JK (2 Door) Belly Up Skid 3/8" 7075 Aluminum

      This is the New GenRight Aluminum FLAT Belly transfer case skid plate for a 2 door Jeep Wrangler JK.It increases your ground clearance by up to 2-1/2" inches by replacing the factory skid plate with a lower-profile and more heavy duty skid plate...

    $1,999.99
  • GenRight's completely flat 7075 Aluminum belly skid for the Jeep JKU GenRight's completely flat 7075 Aluminum belly skid for the Jeep JKU GenRight's completely flat 7075 Aluminum belly skid for the Jeep JKU

    GenRight

    JK (4 Door) Belly Up Skid 3/8" 7075 Aluminum

    This is the GenRight completely FLAT Belly Aluminum transfer case skid plate for a 4 door Jeep Wrangler JK. It increases your ground clearance by up to 3" inches by replacing the factory skid plate with this completely FLAT and more heavy duty skid...

    $2,099.99
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
  • JK (2 Door) Belly Up Skid 3/8" 6061 Aluminum JK (2 Door) Belly Up Skid 3/8" 6061 Aluminum JK (2 Door) Belly Up Skid 3/8" 6061 Aluminum

    GenRight

    JK (2 Door) Belly Up Skid 3/8" 6061 Aluminum

        This is the New GenRight Aluminum FLAT Belly transfer case skid plate for a 2 door Jeep Wrangler JK.It increases your ground clearance by up to 2-1/2" inches by replacing the factory skid plate with a lower-profile and more heavy duty...

    $1,399.99
30 of 30 Items