null

MADE IN THE USA

phone: (805) 584-8635

Fabrication

72 of 90 Items
  • GenRight's Rear Axle Bridge, Dana 60, Welded Rear Axle Bridge, Dana 60, installed in a Stretched Jeep Rear Axle Bridge, Dana 60 with triangulated upper links Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60, Welded

    This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential...

    $399.99
    Add to Cart
  • GenRight's Rear Axle Bridge, 14 Bolt, Welded Rear Axle Bridge, 14 Bolt on rear axle 14 Bolt Rear Axle Bridge on the axle. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $449.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Rear View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Front View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Basic dimensions so you can verify it will fit your application

    GenRight

    Dana 44 Rear Axle Bridge - Unwelded

    This is a weld-on REAR Axle Bridge for the factory Jeep JK (or TJ) Dana 44 rear axle from GenRight Off Road! If you Triangulating (or linking) your Jeep's rear suspension, you will need a "Bridge" (or truss) like this on the rear axle...

    $169.99
    Add to Cart
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
    Add to Cart
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
    Add to Cart
  • Here you can see the slight bends in the 1/4" thick wall CrMo tubing Jeep JK Frame Side Trac Bar from the GenRight Elite 3 Link Suspension kit 1/4" thick frame side mount fits the frame perfectly Shown here how it fits over the steering box frame sleeves. Double shear 9/16" Grade 8 Bolt

    GenRight

    JK Frame Side Trac Bar Mount (2 or 4 Door)

      This is a Heavy Duty Frame Side Front Trac Bar Mount for the Jeep Wrangler JK, from GenRight Off Road.. It is part of our long travel GenRight Elite Coil Over Suspension System. These are the same parts included in our front 3 link kit and the...

    $124.99
    Add to Cart
  • Sale
    Jeep Grille, aluminum blank Close up of it mounted on our 4500 racer Shown here with fake headlight "stickers" on the alum Jeep grille of 4500 racer Pictured here on the GenRight 4585 Ultra4 MOD Class Racer Overall size of the GenRight aluminum grille

    GenRight

    GenRight Aluminum Jeep Wrangler TJ & LJ Grill

      This is a Generic Aluminum Jeep Grille for the Jeep Wrangler TJ / Jeep LJ / Jeep YJ from GenRight Off Road. This is the same grille we ran on our 4585 MOD Class Ultra4 racer.FEATURES: 1/8" thick aluminum. Low profile. Styled to...

    Was: $199.99
    Now: $99.99
    Add to Cart
  • Sale
    BKT-5516 GenRight Universal mounting tabs (Pair) Universal mounting tab Exact size

    GenRight

    Universal Mounting Tabs (Pair)

    This is a top quality mounting tab from GenRight Off Road. They are Laser cut from Heavy Duty 1/8" thick plate steel. Perfect for 1/4-20 clip nuts or mounting brake lines.Size: 1-1/4" x 1-1/4" long x 1/8" thick.They are perfect for mounting brake...

    $3.99
    Add to Cart
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Jeep JK Axle Side Trac Bar Mount (2 or 4 Door)

    This is a Heavy Duty GenRight axle side Trac Bar mount for the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) axle. It keeps the front axle under your Jeep and we work hard to keep the trac bar as...

    $99.99
    Choose Options
  • .120" thick wall tubing is pre-bent and perfect for front shock hoops. Here is a set of hoops being tacked into place on a Jeep frame

    GenRight

    Tube Shock Hoops, 1-1/2" x .120" wall

    This is a pair of 1.50" (1-1/2) diameter x .120" (1/8) thick wall tubing, bent into shock hoops (from our FSM-2004 and FSM-2005 front shock mount kits). Same thing we use on our GenRight TJ, YJ & CJ Long Travel Legend Suspension kits. Perfect for...

    $69.99
    Add to Cart
  • GenRight GRC-5100 side plates Side Plates for Roll Cage Harness Bar Kit Kit includes aluminum side plates ONLY (as pictured) Tabs welded into position

    GenRight

    Side Plates for Roll Cage Harness Bar Kit

    This is the GenRight logo's aluminum side plates, just like we run on many of our GenRight Jeeps. These were made for the side of the GenRight Harness Bar Kit (GRC-2060) on the GenRight roll cage kits.FEATURES: Includes one L & R GR...

    $49.99
    Add to Cart
  • GenRight's Hi-Steer Arm for the Elite Suspension Here is the arm on the Currie knuckle with heim steering Here you can see the hi-steer arm on the Currie axle and knuckle.

    GenRight

    Hi-Steer Arm for Currie RockJock Knuckle

    This is the GenRight modified Currie Hi-Steer arm. It has been modified to have the correct geometry to work with the GenRight JK Elite Suspension System. It positions the drag link in the proper location to match the pitman arm length so you can...

    $349.99
    Add to Cart
  • Jeep JK & JKU Trac Bar w/Frame Side Mount from the Elite 3 Link Suspension kit Here you can see the slight bends in the 1/4" thick wall CrMo tubing 1/4" thick frame side mount fits the frame perfectly Double shear 9/16" Grade 8 Bolt JK Elite Front Trac Bar and mounts, shown here at full bump

    GenRight

    Jeep JK HD Trac Bar w/ Frame Mount (2 or 4 Door)

      This is a Heavy Duty GenRight Front Trac Bar Kit for the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) axle. It keeps the front axle under your Jeep and we work hard to keep the trac bar as...

    $749.99
    Add to Cart
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
    Add to Cart
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GenRight's Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit, shown here with tube support. Jeep YJ Trac Bar Mount (Frame Side) Kit, shown here with optional side gussets.

    GenRight

    Jeep YJ/CJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit specifically designed for the Jeep Wrangler YJ & CJ. This is the same design we have reliably run on our GenRight Jeeps for years!Front Trac Bar Bracket Kit...

    $89.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • 1/4" Thick Straight Tab (Pair) 1/2" Diameter Hole Typical installation as a lower shock mounts Tab welded onto the inside of the frame

    GenRight

    1/4" Thick Straight Tab (Pair)

    This is a top quality "straight" mounting tab from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for mounting limit straps or other things on your Jeep. Features: Material - 1/4"...

    $11.99
    Add to Cart
  • Sale
    We offer 2 different tabs with radius on bottom to fit your project. Super strong, these mounts are laser cut and formed from 3/16" thick cold rolls steel. Shown here welded on a tube. Shown here welded onto an axle (knuckle).

    GenRight

    Shock Mounting Tabs (Pair)

    These are top quality shock mounting brackets from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel and CNC formed into shape for easy installation. They are perfect for lower mounting of coil over (or other high...

    $14.99
    Choose Options
  • 1/4" Thick Saddle Gusset (Pair)

    GenRight

    1/4" Thick Corner Gusset (Pair)

    This laser cut 1/4" thick Heavy Duty Steel Corner Gusset is perfect for reinforcing roll cage or chassis corners (as pictured).Size: Approx 2"x 2"Sold as a pairNo returns accepted after they have been tacked in place!

    $14.99
    Add to Cart
  • 1/4" Thick Radius Tab (Pair)

    GenRight

    1/4" Thick Radius Tab (Pair)

    These are top quality Radius Tabs from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for mounting limit straps or other things on curved surfaces (axle tubes or knuckles). Features: Material...

    $11.99
    Add to Cart
  • Large 3/16" Thick Corner Gusset (Pair)

    GenRight

    Large 3/16" Thick Corner Gusset (Pair)

    This is a "large" Corner Gusset from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel. They are perfect for welding into corners where you need more support.Designed with a "relief" in the gusset to go over a...

    $14.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
    Add to Cart
  • 1/4" Thick Extra Large Corner Gusset (Pair)

    GenRight

    1/4" Thick Extra Large Corner Gusset (Pair)

    This is a Extra Large Corner Gusset from GenRight Off Road. It is Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for any area you want to reinforce or dress up. In a cage this type of gusset can serve as a functional way to hook...

    $19.99
    Add to Cart
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

    This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to protect the...

    $599.99
    Add to Cart
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
    Add to Cart
  • .250" think wall DOM material is perfect for lower links

    GenRight

    DOM Tubing, 2.00" x .250" wall x 36"

    This is 2" diameter x .250" thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Long Travel Suspension kits. Perfect for lower control arms. You cut to the length you need. If you want to carry a spare, cut yours...

    $119.99
    Add to Cart
  • 1-3/4" DOM tubing is perfect for upper links

    GenRight

    DOM Tubing, 1.75" x .120" wall x 36"

    This is 1.75" diameter x .120" thick wall x 3' D.O.M. seamless tubing.Great for use on upper control arms.Same thing we use for the upper links on all our GenRight Suspension kits.FEATURES: 1-3/4" O.D. (Outer Diameter) Hi strength Drawn Over...

    $69.99
    Add to Cart
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
    Add to Cart
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
    Choose Options
  • Sale
    Weld-on Bumper adapter Brackets Here you can see how the bracket adapts a YJ front bumper to fit a CJ frame

    GenRight

    CJ Front Bumper Mounting Brackets

    This is the CJ Front Bumper Mounting Brackets from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel.These brackets will adapt any GenRight YJ Bumper (bolt-on) to a CJ frame (weld-on) 1/2" diameter hole is perfect...

    $59.99
    Add to Cart
72 of 90 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap