null

MADE IN THE USA

phone: (805) 584-8635

Suspension

Our suspension kits have been developed over 10 years, 480 trails, countless vehicles, and multiple King of the Hammers races. We have taken our knowledge and transformed it into packages to provide our customers with the best suspension available in the industry. This includes a variety of products ranging from complete 3 or 4-link suspension to individual brackets and tabs for the DIY fabricators, both of which will save you time and money.

108 of 223 Items
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
    Add to Cart
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
    Add to Cart
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded 4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
    Add to Cart
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight Elite Suspension Rear upper link mount for Dynatrac ProRock 80 rear axle GenRight's rear bridge on Pro Rock 80 rear axle

    GenRight

    4 Link Rear Bridge for Dynatrac Pro Rock 80

    This is the GenRight Elite Suspension REAR Bridge (upper link mount) for a Dynatrac Pro Rock 80. The mounts were designed as part of the GenRight Elite 4 Link rear Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • GenRight Elite Suspension Front upper link mount for Dynatrac XD60 front axle Fits into the JK with GenRight Elite kit like a glove!

    GenRight

    3 Link Bridge for Dynatrac Pro Rock XD60

    This is the GenRight Elite Suspension FRONT Bridge (upper link mount) for a Dynatrac Pro Rock XD 60. The mounts were designed as part of the GenRight Elite 3 Link front Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • JK Elite Rear axle bracket kit for a 3.5" axle tube JK Elite Rear axle lower link, shock, and limit strap mount Assembly shown together

    GenRight

    Rear Axle Side Bracket Kit for RJ70 (3.5" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 70 with 3.5" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the rear axle housing...

    $449.99
    Add to Cart
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit w/ HD Trac Bar mount for 3.5" diameter axle tubes Shock mount, lower link mount, and limit strap mount shown assembled

    GenRight

    Front Axle Side Bracket Kit for RJ70 (3.5" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 70 with 3.5" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded onto the front axle. Features:...

    $549.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit for RockJock 60 Lower link mount, shock mount, and limit strap mount

    GenRight

    Front Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $549.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height...

    $59.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • GenRight's Rear Axle Bridge, Dana 60, Welded Rear Axle Bridge, Dana 60, installed in a Stretched Jeep Rear Axle Bridge, Dana 60 with triangulated upper links Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60, Welded

    This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential...

    $399.99
    Add to Cart
  • GenRight's Rear Axle Bridge, 14 Bolt, Welded Rear Axle Bridge, 14 Bolt on rear axle 14 Bolt Rear Axle Bridge on the axle. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $449.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Rear View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Front View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Basic dimensions so you can verify it will fit your application

    GenRight

    Dana 44 Rear Axle Bridge - Unwelded

    This is a weld-on REAR Axle Bridge for the factory Jeep JK (or TJ) Dana 44 rear axle from GenRight Off Road! If you Triangulating (or linking) your Jeep's rear suspension, you will need a "Bridge" (or truss) like this on the rear axle...

    $169.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep LJ with Tracer Suspension Shown here installed on Jeep LJ frame with GenRight Tracer Suspension System

    GenRight

    Tracer Jeep LJ Rear Sway Bar Kit

      This is the GenRight rear sway bar kit to fit our "Tracer" Jeep LJ Suspension Kit This kit was designed to add stability to your lifted or long travel Jeep Wrangler LJ. It is a weld-on kit. Our sway bar is about 30% stiffer than...

    $849.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep TJ, LJ or YJ Jeep Rear Sway with coil over shock at full droop. Here you can see frame mount for rear sway bar with (white) bearing. Here you can see the axle side mounting and how link fits.

    GenRight

    TJ/LJ/YJ Sway Bar Kit - Rear

      This is the GenRight rear sway bar kit to fit a Jeep TJ, LJ or YJ. This kit was designed to add stability to your lifted or long travel Jeep. It is a weld-on kit. Our sway bar is about 30% stiffer than other brand Anit-Rock type...

    $849.99
    Add to Cart
  • GenRight's Rear Sway Bar Kit for the Jeep CJ-7 (SWB-1004)

    GenRight

    CJ-7 Sway Bar Kit - Rear

    This is a more narrow version of the GenRight rear sway bar kit to fit a Jeep CJ-7. These are great to add stability to your non leaf spring long travel vehicle. Our sway bar is about 30% stiffer than other brand Anit-Rock type sway bars...

    $849.99
    Add to Cart
108 of 223 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap