null

MADE IN THE USA

phone: (805) 584-8635

Suspension

About GenRight's Suspension Systems...

• Proven quality, performance and durability.
• Utilize the GenRight gas tank to allow more room or bigger axles.
• Are weld-on for optimal bracket location(s) and so nothing hangs down.
• Move the spring and dampening control out the wheels (in the optimal position).
• Use higher quality thicker materials for long term durability.
• Use proven quality Genuine Johnny Joints (serviceable).
• Utilize Top quality coilover shocks (King, Fox or Bilstein) with GenRight’s spec valving, spring rates and hose routing.
• Are quiet because of the bind free GenRight 3 link front and 4 link rear suspension.
• Keep the steering box for optimal performance! We have our own spec ram assist kits.

• Designed around high pinion Currie axles that are custom built to GenRight’s specs for best durability and performance off-road.

100% American Made!

Turn your TJ into an LJ!

This simple kit will give you the same up travel we offer in our Tracer coil over shock suspension kit.

All parts are key notched (puzzled) to fit together and self fixture for easy assembly by the installer.

When done, your TJ will even take a factory Jeep Unlimited LJ hard top or soft top!

The GenRight Legend Kit is our original suspension designed for the do-it-yourselfer with a CJ, YJ, TJ or LJ. Available in single or double triangulated version. It allows you to do a little bit at a time, pick your own desired wheelbase, axles (brand and width), tire size and drivetrain combo.

 
The GenRight Tracer kit is geometry that was off-road race Inspired, this “system” is designed for the highest level of performance for their Jeep on AND off road. Longer wheelbase, lower center of gravity, without sacrificing suspension travel. Specifically designed for a Chevy LS3 & 4L80 transmission (or stock drivetrain), Currie axles, & Atlas transfer case.

72 of 75 Items
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep LJ with Tracer Suspension Shown here installed on Jeep LJ frame with GenRight Tracer Suspension System

    GenRight

    Tracer Jeep LJ Rear Sway Bar Kit

      This is the GenRight rear sway bar kit to fit our "Tracer" Jeep LJ Suspension Kit This kit was designed to add stability to your lifted or long travel Jeep Wrangler LJ. It is a weld-on kit. Our sway bar is about 30% stiffer than...

    $849.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep TJ, LJ or YJ Jeep Rear Sway with coil over shock at full droop. Here you can see frame mount for rear sway bar with (white) bearing. Here you can see the axle side mounting and how link fits.

    GenRight

    TJ/LJ/YJ Sway Bar Kit - Rear

      This is the GenRight rear sway bar kit to fit a Jeep TJ, LJ or YJ. This kit was designed to add stability to your lifted or long travel Jeep. It is a weld-on kit. Our sway bar is about 30% stiffer than other brand Anit-Rock type...

    $849.99
    Add to Cart
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
    Add to Cart
  • GenRight Twisted Pitman Arm for the Jeep TJ, LJ, YJ Arm is twisted for optimal geometry and range of motion GenRight Twisted Pitman Arm GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Shown here mounted on a Jeep TJ steering box

    GenRight

    GenRight Twisted Pitman Arm

    This is the innovative Twisted Pitman Arm from GenRight Off Road! This will correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). How? We twisted (or rotated) the drag link mounting...

    $399.99
    Add to Cart
  • KING 2.0" Emulsion Coilover Shock An o-ring on the cap keeps dust and dirt from contaminating the valve Tapered spring cup for more clearance during articulation Single allen pinch bolt to release the preload collar. Shown here on the front of a Jeep Wrangler.

    King Shocks

    KING 2.0" (14" Stroke) Emulsion Coilover Shocks

      This is the KING Brand of 2.0" diameter Coil Over Shock, without remote reservoir. These are the best and most quiet coil over shocks you can buy. KING Shocks have a great name in the off-road world. They build an extremely high...

    $634.99
    Add to Cart
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
    Choose Options
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
    Add to Cart
  • Jeep LJ Tracer Stretch Corner Guard Set - Aluminum Here is how it works, we move the entire wheel opening back 4" Shown here with a EXT flare to move the axle even further back!

    GenRight

    Tracer Stretch LJ Corner Guard Set - Aluminum

    This is the Aluminum "Full" type Corner Guard for the UnlimitedJeep Wrangler LJ with STRETCH FENDER WELL location for the GenRight Off Road TRACER suspension. Features: Laser cut and shape is formed with a custom "one hit" die to assure a...

    $899.99
    Add to Cart
  • Currie short arm suspension kit for the Jeep TJ or LJ

    RockJock

    Suspension Lift Kit for the Jeep TJ/LJ, CE-9100A

    This is the top quality Rock Jock suspension kit (designed by John Currie). It includes a complete set of 8 genuine Johnny Joint® Control Arms for the 1997-2006 Jeep TJ's and LJ's. All arms are heavy duty and fully adjustable allowing...

    $1,850.00
    Add to Cart
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Jeep JK Axle Side Trac Bar Mount (2 or 4 Door)

    This is a Heavy Duty GenRight axle side Trac Bar mount for the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) axle. It keeps the front axle under your Jeep and we work hard to keep the trac bar as...

    $99.99
    Choose Options
  • Jeep JK & JKU Trac Bar w/Frame Side Mount from the Elite 3 Link Suspension kit Here you can see the slight bends in the 1/4" thick wall CrMo tubing 1/4" thick frame side mount fits the frame perfectly Double shear 9/16" Grade 8 Bolt JK Elite Front Trac Bar and mounts, shown here at full bump

    GenRight

    Jeep JK HD Trac Bar w/ Frame Mount (2 or 4 Door)

      This is a Heavy Duty GenRight Front Trac Bar Kit for the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) axle. It keeps the front axle under your Jeep and we work hard to keep the trac bar as...

    $749.99
    Add to Cart
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
    Add to Cart
  • Twisted Pitman Arm Removal Tool, STK-2520 Tool threads into the internal threads cut into the pitman arm Tool being threaded into the pitman arm for removal from the steering box Be sure to cap off the internal threads from dirt and moisture!

    GenRight

    Twisted Pitman Arm Removal Tool

    This is the Removal Tool (or pitman arm puller) for all the GenRight Twisted Pitman Arms.FEATURES include: CNC machined from tool steel. Hex on the tool is same size (1-5/16") as nut holding the pitman arm on the steering box sector...

    $79.99
    Add to Cart
  • Twisted pitman arm and the twisted mount for the hi-steer arm. Closeup of the mount on a hi-steer arm Here you can see how both are twisted to improve range of motion Includes a plastic cap to protect the internal threads on the pitman arm

    GenRight

    Twisted Pitman & Hi-Steer Mount

    This is the GenRight Twisted Pitman Arm and Hi-Steer Arm Mount for drag links with heims on both ends. It includes our Twisted Pitman Arm and our Hi-Steer Arm Mount kit to correct the angle issues inherent in long travel front...

    $499.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • RSM-2150 Rear Coil Spring correction Kit for the Jeep TJ This is the mounting location of the new brackets AFTER GenRight Coil Correction kit is installed BEFORE Coil Correction kit is installed Carefully cut off and clean the frame for the new brackets to be mounted

    GenRight

    Rear Coil Spring Correction Kit

    This is a rear coil spring mounting kit or it can be used as a coil spring correction kit On a Jeep TJ or LJ. This is a low cost way to move the coil spring back on the frame is laser cut and formed from heavy duty 3/16" and 1/4" thick steel and...

    $149.99
    Add to Cart
  • Ram Assist XD Kit from PSC for 38"-42" Tall Tires PSC '95-'02 TJ/XJ/YJ Stage 5 Cylinder Assist Kit

    PSC

    PSC '95-'02 TJ/XJ/YJ Stage 5 Cylinder Assist Kit

      Designed for Extreme Off Highway driving and 38" to 42" tall tires.-Provides double the turning force-Reliefs stress on steering box and frame mounts-PSC ram assist is the ultimate steering stablizerCylinder Assist does not improve your...

    $2,720.00
    Add to Cart
  • Universal 4 Pass Power Steering Cooler Kit Here you can see how this thin cooler mounts behind the grill

    GenRight

    4 Pass Power Steering Cooler

    This is a 4 Pass cooler (8-1/8" Wide x 5" tall x 3/4" deep), that is an excellent tube-fin heat exchanger, which improves the longevity and overall functioning of your vehicle's power steering system. It installs on the low pressure (return side) of...

    $44.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, TJ Front 0"-2" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, TJ Front 0"-2" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep TJ FRONT with a 0 - 2" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
    Choose Options
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

    This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the threaded...

    $549.99
    Add to Cart
  • Jeep TJ/LJ Heavy Duty Trac Bar Kit Axle Side of the TJ Trac Bar Bracket Shown here is how the backside of the bracket boxes in around the frame too. Shown here with Twisted pitman arm and mounted on the side of the TJ frame. Laser cut plates show how the mount box around the Jeep TJ frame.

    GenRight

    Jeep TJ & LJ Heavy Duty Trac Bar Kit

    This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. The materials used are twice as thick as stock! This builders kit comes with the Johnny Joint pre-welded on one side and the tubing...

    $649.99
    Add to Cart
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
    Add to Cart
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
    Choose Options
  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

    This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle width and...

    $999.99 - $1,029.98
    Choose Options
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • Sale
    TJ/LJ/YJ 1" Body Lift

    GenRight

    TJ/LJ/YJ 1" Body Lift

    This is a high quality urethane type 1" Body Lift for a Jeep TJ, LJ and YJ. This is the same type body lift we use on every GenRight Jeep we build.It is an excellent and necessary upgrade for Jeeps 2003 and newer to fit any brand high clearance gas...

    $299.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • Jeep Tj / LJ Legend Suspension Package (Base package pictured) Jeep Tj / LJ Legend Suspension Package (Base package pictured) Turn your Jeep Wrangler TJ into a stable and capable off road machine! Easy to see GenRight Legend kit coil over conversion on the Jeep Wrangler TJ frame. Rear setup with King Coilovers and Air Bumps

    GenRight

    Jeep TJ / LJ Legend Suspension Package

      This is the GenRight "Legend" Coil Over Suspension Package for Jeep Wrangler TJ & LJ (1997-2006) this is the best, most balanced & adaptable suspension system on the market since 2006! This package is also good for a 5"-7" rear...

72 of 75 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap