null

MADE IN THE USA

phone: (805) 584-8635

Jeep XJ 84-'01

72 of 101 Items
  • Sale
    SSV MRB3 Display / Controller is fully sealed and has a back lit LED screen SSV MRB3 Bluetooth System Controller w/Screen with 4 Channel Amp Shown Installed in a Jeep Wrangler TJ using the GenRight aluminum radio plate Shown Installed in a Jeep Wrangler TJ on a black GenRight radio plate The LCD display is compact.

    SSV Works

    SSV MRB3 Bluetooth Audio w/ Screen & Amp

    Looking for a weather & dust proof solution for your Jeep? Well, this is Tony's favorite! This is a surface mounted display that replaces the traditional "stereo head unit" Your Jeep's new "stereo music" will be connected via Bluetooth...

    $299.99
    Was: $299.99
    Now: $229.99
    Choose Options
  • Panel mount kit for USB charging or audio in through 3.5mm plug USB and 3.5mm (1/8") audio in jack are covered. Seen here on the right side of picture.

    SSV Works

    MRB3 3.5mm Aux-in & USB Charging Panel Mount Kit

    This is a nice upgrade to your MRB3 bluetooth audio unit. Now you can direct connect an "aux-in" 3.5mm jack for the MRB3 unit. FEATURES: Weather proof connector to MRB3 unit. Flush mount type port with weather proof cap (as pictured). Includes a 3'...

    $59.99
    Add to Cart
  • GenRight aluminum foot rest Foot rest parts GenRight's aluminum foot rest Aluminum foot rest Aluminum foot rest for passenger

    GenRight

    Universal Aluminum Foot Rest

    This is the GenRight Off Road aluminum foot rest. These are great for a passenger to push themselves back in the seat in rough terrain. It is universal and can be used in any off-road vehicle where the passenger wants a foot rest...

    $99.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
    Add to Cart
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
    Add to Cart
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded 4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
    Add to Cart
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height...

    $59.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • GenRight's Rear Axle Bridge, Dana 60, Welded Rear Axle Bridge, Dana 60, installed in a Stretched Jeep Rear Axle Bridge, Dana 60 with triangulated upper links Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60, Welded

    This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential...

    $399.99
    Add to Cart
  • GenRight's Rear Axle Bridge, 14 Bolt, Welded Rear Axle Bridge, 14 Bolt on rear axle 14 Bolt Rear Axle Bridge on the axle. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $449.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • Sale
    SSV connector for the MRB3 to run an external amp.

    SSV Works

    RCA Wire Harness for Amplifier

    Already have a MRB3 system but want to add more speakers or a subwoofer? Then you will need this harness to connect an amplifier to power the additional speakers or subwoofer. Simply plug this harness into your MRB3's "AMP OUT" plug and the other end...

    $9.99
    Add to Cart
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • Factor 55 Flat Link in Red The flatlink is available in these colors Factor 55 FlatLink Pictured here on our Terremoto Jeep JK This is how a Factor 55 Flatlink is used Prolink and Flatlink side by side

    Factor 55

    Factor 55 Flat Link

    This is the Factor 55 Flatlink. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring.   The FlatLink shackle...

    $146.00
    Choose Options
  • Hood Louver Set, 2pc Short - Black

    GenRight

    Hood Louver Set, 2pc Short - Black

    This is the Gen-Right Off Road 2 pc "short" hood louver set for any Jeep or other vehicle with a relativly flat hood.These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set.This 2pc kit is: 2 short louvers,...

    $89.99
    Add to Cart
  • Torco HPG 75W-90 synthetic gear lube

    Torco

    Torco HPG 75W-90 Synthetic Gear Oil

    HPG is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. Recommended for use in stock or re-geared Jeep JK, JL or JT differentials. Used in all forms of off-road...

    $12.95
    Add to Cart
  • Torco SR-1 10W-30 Synthetic Engine Oil

    Torco

    Torco SR-1r 10W-30 Synthetic Engine Oil

    This is the Torco 10W-30, SR-1r 100% Synthetic motor oil is one of our most popular oils. It's a selective cross blend of highly advanced 100% synthetic base oils and proprietary additives aimed at power efficiency and engine protection. SR-1’s...

    $14.20
    Add to Cart
  • Torco HPG 75W-140 synthetic gear lube

    Torco

    Torco HPG 75W-140 Synthetic Gear Oil

    HPG is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. Recommended for use in stock or re-geared Jeep differentials. Used in all forms of off-road &...

    $13.95
    Add to Cart
  • Torco Synthetic 85W-140 gear lube

    Torco

    Torco RGO 85W-140 Synthetic Gear Oil

    We run Torco Synthetics because they are the best! RGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. It is formulated using a combination of Group IV/V...

    $14.25
    Add to Cart
  • Torco 8oz grease tube, T300160ZE Torco grease in the GenRight Off Road shop

    Torco

    Torco Multi-Purpose Grease

    This is the Torco Multi-Purpose Waterproof Grease is a lithium complex grease formulated to offer superior lubricating qualities in a wide range of automotive and powersport applications. Excellent waterproofing, shock load protection, extreme...

    $7.99
    Add to Cart
  • Torco SR-1r 5W-30 Synthetic Engine Oil

    Torco

    Torco SR-1r 5W-30 Synthetic Engine Oil

    Torco SR-1 Super Street 5W-30 motor oil is a selective cross blend of highly advanced 100% synthetic base oils and proprietary additive systems aimed at increasing power, efficiency and engine protection. Great for the Jeep Turbo JL engines...

    $14.20
    Add to Cart
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
72 of 101 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap