Replacement Parts

Torco

Torco Multi-Purpose Grease

This is the Torco Multi-Purpose Waterproof Grease is a lithium complex grease formulated to offer superior lubricating qualities in a wide range of automotive and powersport applications. Excellent waterproofing, shock load protection, extreme...

Torco

Torco SR-1r 5W-30 Synthetic Engine Oil

Torco SR-1 Super Street 5W-30 motor oil is a selective cross blend of highly advanced 100% synthetic base oils and proprietary additive systems aimed at increasing power, efficiency and engine protection. Great for the Jeep Turbo JL engines...

Torco

Torco SR-1r 5W-40 Synthetic Engine Oil

Torco SR-1r Super Street 5W-40 motor oil is a selective cross blend of highly advanced 100% synthetic base oils and proprietary additive systems aimed at increasing power, efficiency and engine protection. Perfect for the Jeep Diesel JL...

Griffin

GenRight Spec Griffin Aluminum Radiator w/Fans for V8 Jeep JK

This is a custom designed Griffin Aluminum radiator just like the one we run in our Chevy LS3 V8 powered Terremoto Jeep JK with our Elite Suspension. This is s completely new Griffin's radiator with dual electric fans and an aluminum shroud. We take...

74Weld

Billet Aluminum Door Hinges for Jeep Wrangler JK

Looking for little parts you can get to trick out on your new Jeep Wrangler JK or JKU? Then these CNC Machined Billet Aluminum hinges are just the upgrade that you were looking for! The hinges simply bolt-on where the stock door hinges were. These...

GenRight

Tube Shock Hoops, 1-1/2" x .120" wall

This is a pair of 1.50" (1-1/2) diameter x .120" (1/8) thick wall tubing, bent into shock hoops (from our FSM-2004 and FSM-2005 front shock mount kits). Same thing we use on our GenRight TJ, YJ & CJ Long Travel Legend Suspension kits. Perfect for...

Currie Ent

Currie JK 44 Front Crate Axle - Complete

The Currie 44 complete axle is a direct bolt-in solution for the Jeep Wrangler JK 2007 - 2018 off road jeep wranglers. The cost is reduced by retaining the stock outer knuckle assemblies (brakes, hubs etc.) and stock wheel bolt pattern (5 on 5)...

GenRight

3/4-16 Grade 8, Trac Bar Bolt w/UniTorque Nut & Washers

This is the same 3/4" bolt we run in our axle side trac bar mount. It is a 3/4-16 x 3" (fine thread) Grade 8 Bolt w/UniTorque Nut and two Washers Includes: (1) Grade 8 3/4-16 Bolt (4) 3/4-16 Unitorque Nut (2) Grade 8 3/4" washers

GenRight

9/16" Grade 8 Suspension Bolts w/ UniTorque Nuts & Washers (4 Pack)

This is the same Grade 8, 9/16" hardware we use in our suspension kits. 9/16-18 (fine thread) Grade 8 Bolts w/Unitorque Nuts & Washers (4 Pack) Includes: (4) Grade 8 9/16-18 x 4" bolts (4) 9/16-18 Unitorque Nuts (8) Grade 8 9/16" washers

GenRight

Two Bolt Weld on Tube Couplers for 1.5" Tubing (Set of 4)

These 1/4" Thick Weld in Tubing Couplers will fit a 1.5" diameter tube, and allow you to bolt the two tubes together using 2 bolts for each tube. This set of 4 will join 2 tubes total. No returns accepted after they have been tacked in place!

Torco

Torco SR-5R 5W-30 Synthetic Racing Oil

Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5 utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

Warn

WARN ZEON 10-S

  Choose your way to conquer the terrain. The ZEON 10-S is tough enough to tackle anything you will, with a look that is advanced, capable and strong. Muck-busting sealing keeps out everything but the good times. Add a hyper-durable cast-aluminum...

Vision X

VisionX Solstice Solo Prime LED light

This is the 2" Diameter VisionX Solstice Solo Prime LED light (Pod). This is a great light for small places. Highest light output per cubic inch on the market! Next Generation LED bulb produces more light. LIGHT FEATURES: 20...

Torco

Torco SGO 75W-140 Synthetic Gear Oil

We run Torco Synthetics because they are the best! It's what we use in every GenRight built Jeep and Ultra4 race vehicle! SGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load...

Torco

Torco SR-5R 20W-50 Synthetic Racing Oil

Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5R utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

Torco

Torco ATF HiVis Automatic Transmission Oil

HiVis ATF is specially engineered for severe operating conditions encountered in racing, high performance Street and off road use. HiVis is  formulated using 100% synthetic base oils and additive technologies designed to manage extreme loads, high...

GenRight

RivNuts 5/16"-18 (10 Pack)

This is the same hi-quality hardware offered by Gen-Right Off Road on all "Full" Corners, Rockers and Tub Panel Guards. RivNuts are the perfect (and permanent) to install attachment points (nuts) in "blind" (double wall areas) on the Jeeps...

GenRight

RivNuts 1/4"-20 (10 Pack)

This is the same hi-quality hardware offered by Gen-Right Off Road on all "Full" Corners, Rockers and Tub Panel Guards. RivNuts are the perfect (and permanent) to install attachment points (nuts) in "blind" (double wall areas) on the Jeeps...

GenRight

Replacement Rear Sway bar Bushings

This is a great way to freshen up your rig with a new set of rear sway bar bushings!  Overtime the nylon bushings can wear creating some "play" which makes a clunking noise.  These new bushings will tighten things up and maintain the...

GenRight

Perforated, G3 Side Panel STD or HI, Pair

  This is the PERFORATED removable panel for the GenRight Tube Fenders. This is an upgraded from the standard "plain" side panel that comes with every one of our G3 Tube Fenders.FEATURES: Perforated holes vent unwanted head from the engine...

RockJock

Johnny Joint, 1-1/4 Shank by Rock Jock

This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

Griffin

Griffin Universal Fluid Cooler, Large

  This is the Heavy Duty "large" Griffin Aluminum Universal Fluid Cooler. Can be used for engine oil, transmission fluid or power steering fluid cooling.FEATURES: Overall size is 19.75" x 13" x 6.5" thick (includes cooler and fan). Actual...

GenRight

DOM Tubing, 2.00" x .250" wall x 36"

This is 2" diameter x .250" thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Long Travel Suspension kits. Perfect for lower control arms. You cut to the length you need. If you want to carry a spare, cut yours...

GenRight

4 Bolt Formed Tube Clamp - 1-1/2" (Pair)

Another Genuine Ideas from GenRight!This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We...

GenRight

2 Bolt Formed Tube Clamp - 1-1/2" (Pair)

This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We offer this clamp in a 2 bolt or 4 bolt...

GenRight

16" Sway Bar Arm (1-1/4" 48 Spline Shaft)

This is the replacement arm for all GenRight REAR sway bars. SPECS: 16" long Sway Bar Arm 1-1/4" diameter 48 Splines Grade 8 Bolt 2 Washers Nylock Nut NOTE: Arm is supplied as a blank and must be drilled.

GenRight

1/2"-13 x 2" GR8 Skid Plate Bolts (Hex Head) - Set of 6

This set of (6) Grade 8 Bolts (Hex Head) which are meant to be a replacements for your Jeep's belly Skid Plate. 1/2-13 x 2" long 

GenRight

1/2"-13 x 2" Skid Plate Bolts (Button Head) - Set of 6

This set of (6) 1/2-13 x 2" Skid Plate Bolts (Button Head) is meant to be a replacement set of bolts for your GenRight Skid Plate.

Universal Cargo Rack Mounts for YJ or CJ-7

  These are the "universal mounts" that allow you to mount the GenRight Cargo Rack (ACC-10100) to the inside of your Jeeps rear fender wells. Laser cut for heavy duty 3/16" thick cold rolled steel, they will support 200lbs in the cargo rack. Once...

Universal Cargo Rack Mounts (JKU, JK)

  This is the universal mounts allow you to mount your GenRight Cargo Rack (ACC-10100) inside your Jeep's rear cargo area. Fits: 2007-2017 Jeep Wrangler JK (2 door or 4 door) 2003-2006 Jeep Wrangler LJ 1997-2006 Jeep Wrangler TJ Powder coated...

GenRight Cargo Rack Mounts for GR JK (4 Dr.) Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight 4-Door JK Roll Cage.

GenRight Cargo Rack Mounts for GR JK (2 Dr.) Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight 2-Door JK Roll Cage.

GenRight Cargo Rack Mounts for GR LJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight LJ Roll Cage.

GenRight Cargo Rack Mounts for GR TJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight TJ Roll Cage.

GenRight

YJ Fuel Pump Module Gasket

This is a replacement rubber gasket for the factory Jeep YJ Fuel Pump module / sending unit. Fit all GenRight Jeep YJ & CJ tanks. It also fits the stock '87-'95 Jeep Wrangler YJ's with 6 cylinder plastic gas tanks. p/n: JP27833

R1 Concepts

R1 Geomet Series Jeep JL Sahara/Rubicon Drilled & Slotted Brake REAR Rotors

  R1 Concepts Geomet Series REAR rotors for the Jeep JL Sahara or Rubicon. They provide the ultimate stopping power needed for demanding driving and harsh conditions. Manufactured using more Carbon, Chromium, and Molybdenum, these High Carbon...