null

Made in the USA Since 2006

Hardware

8 of 8 Items
  • Weld-on Currie Johnny Joint, CE-9110CP w/grease fitting on barrel Here you can see the Johnny Joint TIG welded onto a GenRight trac bar Here you can see the Johnny Joint on the frame side of a GenRight trac bar Here you can see the Johnny Joint on a GenRight trac bar Here you can see the Johnny Joint on the frame side of a GenRight trac bar

    RockJock

    Johnny Joint, weld-on

    This is a weld-on type genuine Rock Jock Johnny Joint (by John Currie) for trac bars or suspension control arms. This joint consists of a 2 ½” O.D. x .180” wall chromoly outer barrel. Interlocking urethane bushings that encase...

    $64.99
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
  • Johnny Joint for Upper Link on Axle

    RockJock

    Johnny Joint for Upper Link on Axle

    This is the specially machined Johnny Joint® rod end out of the Currie CE-9102K front end housing kit. This joint's outer shell is machined to a 1.795" outer diameter with a flanged edge and is designed to be pressed into the "EAR" on the...

    $73.00
  • FK Heim Rod End with 1/2"-20 threaded shank Example of the heim being used at the sway bar arm Example of the heim being used at the axle side

    FK Rod Ends

    1/2"-20 FK Heim Rod End (Choose Thread)

    This is a 1/2"-20 FK Heim Rod End. We use these in our GenRight Sway Bar kits. 1/2"-20 Threaded shank with a 1/2" diameter bore.Features: Both Left & Right Hand Threads available. 1/2"-20 threaded shank. Hi strength CrMo body. Hardened...

    $24.99
  • RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
  • JMXL16T Super Heavy Duty 1-1/4" -12 FK Rod End

    FK Rod Ends

    1-1/4"-12 FK Heim Rod End (Choose Thread)

    This is a genuine FK Heim, it is the only thing we will use on our Jeeps and off-road racers. These are American Made and fully CrMo (aircraft grade) 1-1/4" shank with 12TPI and 1" bore (through the ball). The amount of rotation in...

    $89.99
8 of 8 Items