null

MADE IN THE USA

phone: (805) 584-8635

D.I.Y. & UNIVERSAL

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

108 of 186 Items
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight Elite Suspension Rear upper link mount for Dynatrac ProRock 80 rear axle GenRight's rear bridge on Pro Rock 80 rear axle

    GenRight

    4 Link Rear Bridge for Dynatrac Pro Rock 80

    This is the GenRight Elite Suspension REAR Bridge (upper link mount) for a Dynatrac Pro Rock 80. The mounts were designed as part of the GenRight Elite 4 Link rear Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • GenRight Elite Suspension Front upper link mount for Dynatrac XD60 front axle Fits into the JK with GenRight Elite kit like a glove!

    GenRight

    3 Link Bridge for Dynatrac Pro Rock XD60

    This is the GenRight Elite Suspension FRONT Bridge (upper link mount) for a Dynatrac Pro Rock XD 60. The mounts were designed as part of the GenRight Elite 3 Link front Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • JK Elite Rear axle bracket kit for a 3.5" axle tube JK Elite Rear axle lower link, shock, and limit strap mount Assembly shown together

    GenRight

    Rear Axle Side Bracket Kit for RJ70 (3.5" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 70 with 3.5" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the rear axle housing...

    $449.99
    Add to Cart
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit w/ HD Trac Bar mount for 3.5" diameter axle tubes Shock mount, lower link mount, and limit strap mount shown assembled

    GenRight

    Front Axle Side Bracket Kit for RJ70 (3.5" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 70 with 3.5" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded onto the front axle. Features:...

    $549.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit for RockJock 60 Lower link mount, shock mount, and limit strap mount

    GenRight

    Front Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $549.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height...

    $59.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • GenRight's Rear Axle Bridge, Dana 60, Welded Rear Axle Bridge, Dana 60, installed in a Stretched Jeep Rear Axle Bridge, Dana 60 with triangulated upper links Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60, Welded

    This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential...

    $399.99
    Add to Cart
  • GenRight's Rear Axle Bridge, 14 Bolt, Welded Rear Axle Bridge, 14 Bolt on rear axle 14 Bolt Rear Axle Bridge on the axle. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $449.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • Sale
    Reverse, full manual 4L80 Transmission with 4 WD case

    Maximum Transmissions

    4L80 4-Speed Auto Transmission

    This is a full race 4L80 4-speed automatic transmission built by Maximum Transmissions. GM originally built this heavy duty transmission off their popular Turbo 400 3-speed transmission. This is the same transmission we put in every V8 Tracer build...

    $8,999.99
    Add to Cart
  • Atlas 3.0 Transfer Case, back Atlas 3.0 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 3.0:1 Transfer Case

    This is an Atlas II, 2 Speed Transfer Case with 3:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years! We order these cases with the following specs: 3.0:1 ratio 1310 CV Yokes Twin stick...

  • Factor 55 Flat Link in Red The flatlink is available in these colors Factor 55 FlatLink Pictured here on our Terremoto Jeep JK This is how a Factor 55 Flatlink is used Prolink and Flatlink side by side

    Factor 55

    Factor 55 Flat Link

    This is the Factor 55 Flatlink. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring.   The FlatLink shackle...

    $146.00
    Choose Options
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
    Add to Cart
  • GenRight Logo Patches, available in red, white, & blue, or black & white. Sold each. Shown here on a dog jacket GenRight GR Patches

    GenRight

    GenRight Logo Patch (Choose Color)

    This is the GenRight Off Road "GR" Patch. This patch can be added to anything you want to dress up (Beanie, Hats, Jackets, etc.) with a cool GR logo'd patch!FEATURES: 3" long x 2" wide. Your choice of: Red, White & Blue (rubber patch) or Black...

    $4.99
    Choose Options
  • Atlas 3.8 Transfer Case, back Atlas 3.8 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 3.8:1 Transfer Case

    This is an Atlas II, 2 Speed Transfer Case with a 3.8:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years!   We order them with the following specs:   3.8:1 ratio 1310 CV Yokes Twin...

  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • Winters Shifter Kit

    Closeout

    Winters Shifter for 4L80

    Winters Sidewinder Standard Automatic Shifter. The durable, jam-proof design of Winters Sidewinder standard automatic shifters enables you to slam gears, while the fail-safe gate layout makes it impossible to accidentally shift into reverse. The units...

    $349.99
    $299.99
    Add to Cart
108 of 186 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap