null

Made in the USA Since 2006

Universal & DIY

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

  • C-Pillar Tie In Kit parts for the Jeep Wrangler YJ, hardware included. Here you can see how the C-pillar tie-in kit installs into the rear shock tower

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep YJ

    This is the GenRight Off Road C-pillar tie-in kit for the Jeep Wrangler YJ Roll Cage. It ties the bottom of the C-pillar mounting plate (through the fender well) into the side or top of the outboard rear shock mount (essentially the frame) for...

    $129.99
  • TJ/LJ C-Pillar Tie-In Builders Kit parts, hardware included, but not pictured. Looking up at the attachment point under the rear fender well. How it mounts to the top of the box at the rear most body mount.

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep TJ & LJ

    This is the GenRight Off Road kit to tie-in the C-Pillar of your Roll Cage down to the top of the rear body mount (directly above the frame mount) for added support and safety in the event of a roll over. This is the same kit we have on the...

    $149.99
  • Simple behind the seat tank for the YJ or CJ-7 from GenRight Dimensions of the BST-4000 tank and mounting flange Gas Cap on the BST-4000 fuel tank with spill dam around it Optional fuel pump blank plate, gasket or CJ pick up adapter for the BST-4000 How the optional CJ pick up adapter works

    GenRight

    Universal Tank (23 Gal)

    This is a high quality universal tank to fit behind the back seat in the cargo area of a Jeep YJ or CJ-7. This tank can be used as a primary tank (or a 2nd tank). Because it is not mounted under the tub, the rear axle can be moved back up to 14"...

    $899.99
  • GenRight BST-2100 "Behind the Seat" tank for Jeep TJ, LJ or JK Diagram of the BST-2100 with dimensions Close up view of gas cap and "dam" to prevent damage or spillage Optional metal cover to protect the fuel pump

    GenRight

    Universal 20 Gallon Fuel Cell

    Finally a tank specifically designed for hard core Jeeps that are no longer driven on the highway. By using this model tank it opens the entire under body area for radical rear axle relocation. It is intended to be mounted behind the driver and...

    $949.99
  • 16307 Fuel Pump Wire Harness, heavy duty, Aeromotive

    Aeromotive

    Aeromotive Wire Harness to run Fuel Pump

    This is the heavy duty Aeromotive wire harness to run an aftermarket (high volume & high pressure) fuel pump. Are you considering to switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot rodding...

    $129.99
  • Threaded Step Bungs (Each) - Multiple Sizes 7/8-14 Weld in bung on a steering tie rod and drag link 1-1/4-12 Weld in bung on a control arm with a flex joint 1/2-20 Weld in bung on the end of a sway bar link

    GenRight

    Threaded Step Race Bungs (Each) - Multiple Sizes

    This is a top quality weld-in tube insert or bung (aka; threaded insert). They are CNC machined from cold rolled steel can be MIG or TIG welded into the end of your tubing. The hex head on the end of the bungs we sell stays exposed after being welded...

    $9.99 - $21.98
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
  • Aeromotive 340 Stealth in-tank pump kit contents Close up of Aeromotive 340 Stealth in-tank pump Aeromotive 340 Stealth in-tank pump application chart Aeromotive 340 Stealth in-tank pump spec sheet Aeromotive 340 Stealth in-tank pump drawing with dimensions

    Aeromotive

    Aeromotive 340 Stealth In-tank Fuel Pump w/sock

    This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340 lph...

    $137.99
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $844.99
  •  Universal Spare Tire & Wheel Mount.  The urethane isolator holds a variety of wheel sizes. Here you can see how it clamps the wheel into place.

    GenRight

    Universal Spare Tire & Wheel Mount

    This is a top quality universal spare tire mounting assembly from GenRight Off Road. It has a heavy duty 1" ACME threaded rod and giant T-handle nut are perfect to hold a spare tire in an off-road vehicle. The mounting bracket has (6) 1/4-20 Grade 8...

    $349.99
  • Universal Bolt in Spare Tire & Wheel Mount Universal Spare Tire & Wheel Mount Installed in the back of a UTV.

    GenRight

    Universal Bolt in Spare Tire & Wheel Mount

    This is a heavy duty Universal Bolt on Spare Tire & Wheel Mount from GenRight Off Road. Build from 3/16" cold rolled steel plate it is strong. It has a T-handle on a large acme thread that allows you to quickly load and unload a spare tire/wheel...

    $449.99
  • Long Fuel Pump Extension Kit Extended pump module vs stock height. Comparison to factory rods (on right)

    GenRight

    Factory Fuel Pump Extension Kit - Deep

    This is our longest extension kit that allows you to use your factory Jeep fuel pump by extending the module to reach the bottom of the higher capacity GenRight fuel tank. FITS: GST-2100-2 (2005 & 2006). GST-8007-2 (2007 thru 2018)...

    $79.99
  • Universal Removable Harness Bar w/ 2 bolt Flange Option Universal Removable Harness Bar w/ Formed Tube Clamp Option Universal Removable Harness Bar w/ HD Tube Clamp Option Universal Removable Harness Bar w/ HD Tube Clamp Option Installed The green bar behind the front seats on the B-pillar is this bar kit.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourself'r to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Removable Harness Bar Kit that will allow you to put it in for the big wheeling trips and remove it for everyday life around town...

    $119.99 - $199.99
  • Stretched Jeep Wrangler Unlimited LJ with GenRight Tracer Complete Rolling Chassis Tony testing the Tracer suspension in a 100% built GenRight Jeep LJ at the Hammers Unparalleled attention to detail and workmanship Welding on all the new heavy duty brackets to the stock Jeep Unlimited frame Our special 4340 CrMo pitman arm allows the suspension to bump super deep

    GenRight

    TRACER Jeep Wrangler LJ Complete Rolling Chassis

    This is a complete rolling chassis is outfitted with GenRight Off Road's all new "Tracer" Suspension for the Jeep Wrangler LJ, Unlimited. The Tracer name comes from combining the attributes of a best in class Trail Rig and our Modified Class Racer...

    $79,999.99
  • Spiderweb Shade for the GenRight Roll Cages The mesh provides shade while still allowing light to pass through

    SpiderWeb Shade

    SpiderWeb Shade for GenRight TJ, YJ & CJ Cages

    This is the Spiderweb Shade specifically sized to fit the GenRight TJ, YJ or CJ-7 Roll Cages.  This is a shade top that will not flap in the wind while driving (yes quiet)! This high quality top requires NO windshield header. The mesh...

    $119.99
  • Fuel Pump Access Panel for the Jeep LJ GenRight's fuel tank access plate is cut into the rear floor section of a Jeep LJ

    GenRight

    Fuel Pump Access Panel for the Jeep LJ

    This is the GenRight Off Road rear floor access plate for the wider floor ribs on the Jeep Wrangler Unlimited LJ (all models 2003 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without...

    $169.99
  • GenRight Jeep TJ floor plate assembly This is where it is installed in the rear of the cargo area floor of an '05 TJ When the cover plate is installed it only sticks up 1/8" above the top of the ribs in the floor

    GenRight

    Fuel Pump Access Panel for the Jeep TJ, YJ and CJ-7

    This is the GenRight Off Road rear floor access plate/mount for the Jeep Wrangler TJ, Jeep YJ or Jeep CJ-7 (all models 1976 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without dropping the entire fuel...

    $169.99
  • GST4053 and GST2053 Frame Sleeves w/ Hardware Close up of the sleeve on forward gas tank mount Sleeve shown here on tank mount. Shown here where they would go thru the frame, on each side

    GenRight

    GST4053 and GST2053 Frame Sleeves

    This is the Frame Sleeve kit for the Jeep TJ or YJ. It necessary if bolting up a GenRight gas tank through the factory frame to keep from crushing the frame when tightening to two forward bolts on the skid plate. One sleeve and bolt is used per side...

    $9.99
  • GenRight Billet twisted pitman arm Heat Treated Chromoly provides incredible strength and durability. GenRight Billet twisted pitman arm Arm is twisted for optimal geometry GenRight Billet twisted pitman arm

    GenRight

    Billet Chromoly Twisted Pitman Arm

    This is the new and innovative GenRight Billet Twisted Pitman Arm that allows for 3.5" more up travel. This arm was designed as part of our new low ride height TRACER Suspension system for the Jeep LJ. It corrects the angle issues inherent in...

    $899.99