null

Made in the USA Since 2006

Gas Tanks

All GenRight Gas Tanks are Made in the USA, hand TIG welded, pressure tested, and CARB compliant (not CARB legal). They utilize your existing factory fuel pump or fuel module, and are 100% bolt in. Most tanks also come with a heavy duty 3/16" powder coated steel skid plate.

  • 100% TIG Welded 1/8" thick aluminum alloy tank.
  • Pressure tested for 24 hours to ensure each and every tank is completely sealed
  • All tanks come with a 3/16" thick steel skid plate (except BST tanks)
  • Accepts the factory fuel pump module (or fuel level sending unit).
  • Reuses all of the factory EVAP connections (no check engine lights).

GenRight's Auxiliary and replacement Fuel Tanks are available in a variety of options.

EXT - Allows for 4-5" of stretch (depending on the axle)

COMP - 6-7" of stretch (depending on the axle)

Enduro - No stretch, 5 gallons over stock

Safari - No stretch, 11 gallons over stock

6 of 6 Items
  • Sale
    Jeep JK 36 Gal Gas Tank & Skid Plate (For GenRight's Elite Suspension only) Axle side of the 36 Gal Gas Tank & Skid Plate is for use with the GenRight Elite Suspension Includes all necessary mounting hardware and plumbing to install Here you can see it does not hang down very far! Close up of the 36 gallon GST-8007 fuel tank mounted, still offers a good departure

    GenRight

    Jeep JK 36 Gal Gas Tank & Skid Plate (For Elite Suspension)

    This is the all new 36 Gallon Aluminum Gas Tank and Skid Plate from GenRight Off Road for use with the Jeep Wrangler JK Elite Suspension on a 4 door JK. Now you can carry enough gas to explore your favorite areas or overland. This fuel tank assembly...

    Was: $2,699.99
    Now: $2,429.99
  • Sale
    GST-8002-2, 20 Gallon Jeep JK rear mounted tank. Here you can see it hangs down a little more than receiver hitch. How it mounts in the rear section of the Jeep's frame. How it mounts, looking up from the bottom. Basic 20 Gallon JK Gas Tank and Skid Plate Dimensions.

    GenRight

    Jeep JK 20 Gal Single Gas Tank & Steel Skid Plate

    Building your JK into the ultimate rock crawler? Then we have the tank so you can put a 4-Link rear suspension in your Jeep Wrangler JK.This is the GenRight Crawler™ Gas Tank to fit a Jeep JK (2007 - Current). It is specifically designed...

    $2,159.99 - $2,359.99
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

    This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire assembly is...

    $299.99
  • Long Fuel Pump Extension Kit Extended pump module vs stock height. Comparison to factory rods (on right)

    GenRight

    Factory Fuel Pump Extension Kit - Deep

    This is our longest extension kit that allows you to use your factory Jeep fuel pump by extending the module to reach the bottom of the higher capacity GenRight fuel tank. FITS: GST-2100-2 (2005 & 2006). GST-8007-2 (2007 thru 2018)...

    $79.99
  • JK Fuel Pump Extension Kit Comparison to factory rods (on right)

    GenRight

    JK Factory Fuel Pump Extension Kit

    This kit allows you to use your factory Jeep JK fuel pump with our 25 Gallon Gas Tank for Jeep JK (GST-8550-2) by extending it to reach the bottom of the fuel tank. NOTE: Some aftermarket fuel pump modules are slightly different and may not work with...

    $79.99
6 of 6 Items