null

MADE IN THE USA

  • JP27833 Rubber gasket for the Jeep Wrangler YJ fuel pump module

    GenRight

    YJ Fuel Pump Module Gasket

    This is a replacement rubber gasket for the factory Jeep YJ Fuel Pump module / sending unit. Fit all GenRight Jeep YJ & CJ tanks. It also fits the stock '87-'95 Jeep Wrangler YJ's with 6 cylinder plastic gas tanks. p/n: JP27833

    $24.99
  • 16307 Fuel Pump Wire Harness, heavy duty, Aeromotive

    Aeromotive

    Aeromotive Wire Harness to run Fuel Pump

      This is the heavy duty Aeromotive wire harness to run an aftermarket (high volume & high pressure) fuel pump. Are you considering to switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot...

    $164.95
  • GenRight Corner Guard Hardware Kit

    GenRight

    GenRight Corner Guard Hardware Kit

    This is a universal Replacement hardware kit for any model GenRight corner guards. It includes 5/16-18 stainless steel flat head allen bolts, washers and nuts (as pictured). It even includes a rivnut installation tool, hinge spacers, tabs to tie into...

    $69.99
  • ARP-1001 GenRight Fuel Pump ring (and nut) for a 2005 - 2018 Jeep pump module

    GenRight

    Fuel Pump Ring, 2005 - 2018 TJ / LJ / JK

    This is the fuel pump adapter ring for any 2005 - Current factory type fuel pump modules on the Jeep TJ, LJ, and JK. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks...

    $349.99
  • Aeromotive 340 Stealth in-tank pump kit contents Close up of Aeromotive 340 Stealth in-tank pump Aeromotive 340 Stealth in-tank pump application chart Aeromotive 340 Stealth in-tank pump spec sheet Aeromotive 340 Stealth in-tank pump drawing with dimensions

    Aeromotive

    Aeromotive 340 Stealth In-tank Fuel Pump w/sock

      This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340...

    $144.95
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $947.95
  • APR-1000 Fuel pump ring, TJ

    GenRight

    Fuel Pump Ring, 1997 - 2004 TJ / XJ

    This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

    $299.99
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

    This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire assembly is...

    $299.99
  • Sale
    Polyurethane Bump Stop

    Daystar

    Polyurethane Bump Stop w/Threaded Stud

    This is a pair (2) of Urethane Bump Stop pads.Features: 2" diameter 1.5" thick Ideal for low speed rock crawling. Compact and versatile 3/8"-16 x 1" Long Threaded Stud is molded into urethane Includes Nyloc Nuts Includes (2) Urethane...

    $29.99
  • Latch Pin for Tire Carrier

    GenRight

    Latch Pin for Tire Carrier

    This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier.This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

    $14.99
  • Replacement Urethane Bushings for the GenRight universal transmission cross member

    GenRight

    Bushings for Universal Trans Cross Member

    This is a replacement Urethane (Rubber) Bushings for the GenRight Off Road Universal Transmission Cross Member (BKT-1050). These bushings can be used on either side of the cross member. Sold as a pair (4 urethane bushings and 2 tube sleeves). Easy to...

    $24.99
  • Wheel Isolator for GenRight Tire Carrier It sits under the T-handle.

    GenRight

    Wheel Isolator for GenRight Tire Carrier

    This is a replacement Urethane (Rubber) wheel Isolator for the GenRight Off Road Swing Out Rear Tire Carriers. This isolator works on the steel or the aluminum GenRight swing out tire carrier. Sold as a each.  Easy to install.

    $34.99
  • Weld on Jeep JK Dome Light Housing (For GR Cages) *Factory light is not included with this kit.

    GenRight

    Jeep JK Dome Light Housing (For GenRight Cages)

    This kit is meant for use with GenRight Roll Cages for Jeep JK. It allows you to re-use your factory dome/courtesy light with your GR cage in a clean, sleek package that you simply weld on to your GenRight Cage during assembly. *Note: Factory light is...

    $99.99
  • Aeromotive to GenRight Tank Fuel Pump Adapter Phantom with GenRight adapter ring Phantom in tank pump unit with GenRight Adapter on it Assembly ready to go into the gas tank Phantom fuel pump module installed on GenRight gas tank (fuel pump ring is part of tank)

    GenRight

    Aeromotive to GenRight Tank Fuel Pump Adapter

    This is a billet machined aluminum "adapter" plate from GenRight Off Road. It allows you to run an Aeromotive Phantom series fuel pump module (single or dual) in your GenRight Gas Tank. NOTES: The GenRight adapter plate only fits the -2...

    $69.99
  • Sale
    Jeep JK Windshield Light Bar Mount (For 50" Light Bar) Shown Powder Coated Yellow

    GenRight

    52" Windshield Light Bar Mounts, JK

    This is the GenRight brand 52" LED light bar mount for the Jeep JK. 1/8" steel construction, this Windshield Light bar bracket(s) is the ultimate solution for adding our lighting system to your Jeep JK (2 Door or 4 Door). With it's modern, stylistic...

    $129.99
  • .250" think wall DOM material is perfect for lower links

    GenRight

    CrMo Tubing, 1-3/8" x .188" wall x 60"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 60" CrMo seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for your steering Tie Rod. You cut to the length you need for your...

    $93.00
  • Replacement GenRight Crawler Gas Tank Sticker Originally on our gas tanks, they can be used anywhere.

    GenRight

    GenRight Gas Tank Crawler Sticker

    This is a super high quality vinyl decal, just like the stickers we use on the GenRight Jeeps!This sticker features the GenRight Gas Tank Crawler logo. This is replacement for anyone that scraped their crawler sticker off on an awesome trail,...

    $3.00
  • 1-3/8" DOM Tubing (.188" Wall) 3 ft. Long

    GenRight

    DOM Tubing, 1-3/8" x .188" wall x 36"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for Drag Link (not tie rods). You cut to the length you need for your...

    $79.99
  • Scotch Brite Pad

    GenRight

    Scotch Brite Pad

    This is the same 3M brand Scotch Brite pad we use at the GenRight factory to "tune up" all our aluminum products after the manufacturing process. Approximately 6" x 9" in size. Sold each.

    $6.99