null

Made in the USA Since 2006

4 of 4 Items
  • ARP Stainless 12 point bolt, 5/16-18 x 12.5" long Start each ARP bolt by hand, at least 3 turns. Then you can evenly thread in with a power tool Torque each ARP 5/16 bolt to 18 ft/lbs The only thing Tony or Jordan will run on their beadlock wheels!

    ARP

    ARP 5/16"-18 x 1.25", 12 point Bolt

    ARP bolts are better than Grade 8 bolts. The 12 point head is perfect for bead lock wheels. making it much easier to remove the bolts after running them across rocks and other off-road obstacles. This the same bolts Jami uses on the GenRight Growler YJ...

    $3.75
  • Weld-on Currie Johnny Joint, CE-9110CP w/grease fitting on barrel Here you can see the Johnny Joint TIG welded onto a GenRight trac bar Here you can see the Johnny Joint on the frame side of a GenRight trac bar Here you can see the Johnny Joint on a GenRight trac bar Here you can see the Johnny Joint on the frame side of a GenRight trac bar

    RockJock

    Johnny Joint, weld-on

    This is a weld-on type genuine Rock Jock Johnny Joint (by John Currie) for trac bars or suspension control arms. This joint consists of a 2 ½” O.D. x .180” wall chromoly outer barrel. Interlocking urethane bushings that encase...

    $64.99
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
  • Johnny Joint for Upper Link on Axle

    RockJock

    Johnny Joint for Upper Link on Axle

    This is the specially machined Johnny Joint® rod end out of the Currie CE-9102K front end housing kit. This joint's outer shell is machined to a 1.795" outer diameter with a flanged edge and is designed to be pressed into the "EAR" on the...

    $73.00
4 of 4 Items