null

MADE IN THE USA

36 of 53 Items
  • Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate

    GenRight

    Jeep TJ/LJ Steering Box Skid Plate

       This is the GenRight Steering Box Skid Plate to fit any '97-06' Jeep Wrangler TJ. Designed to protect the steering box and sector shaft from damage due to hitting obstacles on the trail. Features: Works with aftermarket front...

    $79.99
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
  • GenRight Twisted Pitman Arm for the Jeep TJ, LJ, YJ Arm is twisted for optimal geometry and range of motion GenRight Twisted Pitman Arm GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Shown here mounted on a Jeep TJ steering box

    GenRight

    GenRight Twisted Pitman Arm

    This is the innovative Twisted Pitman Arm from GenRight Off Road! This will correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). How? We twisted (or rotated) the drag link mounting...

    $399.99
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
  • Universal 4 Pass Power Steering Cooler Kit Here you can see how this thin cooler mounts behind the grill

    GenRight

    4 Pass Power Steering Cooler

    This is a 4 Pass cooler (8-1/8" Wide x 5" tall x 3/4" deep), that is an excellent tube-fin heat exchanger, which improves the longevity and overall functioning of your vehicle's power steering system. It installs on the low pressure (return side) of...

    $44.99
  • Twisted Pitman Arm Removal Tool, STK-2520 Tool threads into the internal threads cut into the pitman arm Tool being threaded into the pitman arm for removal from the steering box Be sure to cap off the internal threads from dirt and moisture!

    GenRight

    Twisted Pitman Arm Removal Tool

    This is the Removal Tool (or pitman arm puller) for all the GenRight Twisted Pitman Arms.FEATURES include: CNC machined from tool steel. Hex on the tool is same size (1-5/16") as nut holding the pitman arm on the steering box sector...

    $79.99
  • Steering box brace for the Jeep Wrangler TJ Close up of the clamp for the bottom of the steering box housing Shown here on a GenRight Tracer build

    GenRight

    Steering Box Brace, Jeep TJ (Saginaw box)

      This is a steering box brace for a Jeep Wrangler TJ or LJ Unlimited (with GenRight Tracer Kit installed). This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added...

    $89.40
  • 6-bolt PRP "flat" Leather Steering wheel PRP wheel shown here in GenRight Terremoto Jeep Wrangler JKU Pictured here with GenRight quick release hub on the Flat PRP wheel

    PRP

    PRP Leather Flat Steering Wheel

    PRP’s Steering Wheels are Built for Off-Road. Constructed from high strength aluminum, with a matte black finish for extra durability… and to make it look cool. The steering wheel has 6 point bolt pattern, specifically chosen because it...

    $169.99
  • Reverse Twisted Pitman Arm GenRight's Reverse Twisted Pitman Arm, STK-2540
Shown here on a JK steering box in the GenRight 4500 car

    GenRight

    Reverse Double Shear Pitman Arm

    This is the innovative GenRight Reverse Twisted Pitman Arm to correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). This same pitman arm we used in Jordan's 4585 MOD Class racer with a JK...

    $469.99
  • Steering box brace for the Jeep Wrangler YJ Close up of the clamp for the bottom of the steering box housing

    GenRight

    Steering Box Brace, Jeep YJ (Saginaw box)

    This is a steering box brace for a Jeep Wrangler YJ. This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added stress from larger tires or a front locker. This brace is...

    $89.40
  • RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
  • Twisted pitman arm and the twisted mount for the hi-steer arm. Closeup of the mount on a hi-steer arm Here you can see how both are twisted to improve range of motion Includes a plastic cap to protect the internal threads on the pitman arm

    GenRight

    Twisted Pitman & Hi-Steer Mount

    This is the GenRight Twisted Pitman Arm and Hi-Steer Arm Mount for drag links with heims on both ends. It includes our Twisted Pitman Arm and our Hi-Steer Arm Mount kit to correct the angle issues inherent in long travel front...

    $499.99
  • Jeep YJ Steering Box Skid Plate GenRight Steering Box skid plate on the Growler YJ Side view of the GenRight steering box skid plate Jeep YJ Steering Box Skid Plate

    GenRight

    Jeep YJ Steering Box Skid Plate

    This is the GenRight Steering Box Skid Plate to fit any '87-95' Jeep Wrangler YJ. It is designed to protect the steering box housing and sector shaft from damage due to hitting obstacles on the trail.Features: Works with aftermarket front...

    $79.99
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
  •  LS Engine Accessory Bracket Mounting Kit Shown here installed on an LS3 in a Jeep LJ Shown here installed on an LS3 with remote steering res above the pump LS Engine Accessory Bracket Mounting Kit Here you can see how we capture the power steering pump onto the LS head

    GenRight

    LS Engine Accessory Bracket Mounting Kit

    This is the GenRight LS Engine accessory mounting bracket kit for your off road Jeep Wrangler. These beefy laser cut brackets move the engine accessories up out of the way. It mounts the GM alternator, PSC power steering pump and reservoir (as...

    $489.99
  • The Currie 9704 is a direct bolt-on for the 2007-2018 Jeep JK Includes bracket kit for the dampner Stock JK Steering is much smaller and no bump out for a larger diff cover!

    RockJock

    Jeep JK HD Steering, Rock Jock

    This is the Rock Jock brand Currectlync® heavy-duty steering, tie rod and drag link for all 2007-2018 Jeep® JK Wrangler models. It provides the increased strength and durability required to survive large tires and heavy off-road use...

    $712.00
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
  • 1-3/8" DOM Tubing (.188" Wall) 3 ft. Long

    GenRight

    DOM Tubing, 1-3/8" x .188" wall x 36"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for Drag Link (not tie rods). You cut to the length you need for your...

    $79.99
  • .250" think wall DOM material is perfect for lower links

    GenRight

    CrMo Tubing, 1-3/8" x .188" wall x 60"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 60" CrMo seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for your steering Tie Rod. You cut to the length you need for your...

    $93.00
  • GenRight's universal steering column kit STK-8200 Close up of the kit components Adjustable Tilt Wheel mounted in the GenRight aluminum dash Shortened and TIG welded assembly ready for installation.

    GenRight

    Universal Steering Kit for Aluminum Dash

      This "one click" kit has everything you need to build the steering column in your off road Jeep with the GenRight aluminum dash. Originally designed for our Terremoto JK Aluminum dash, this premium grade kit is now available to the public...

    $1,199.99
  • Ram Assist XD Kit from PSC for 38"-42" Tall Tires

    PSC

    PSC '03-'06 TJ/LJ Extreme Duty Cylinder Assist Kit

      Designed for Extreme Off Highway driving and 38" to 42" tall tires.-Provides double the turning force-Reliefs stress on steering box and frame mounts-PSC ram assist is the ultimate steering stablizerCylinder Assist does not improve your...

    $2,765.00
  • Teraflex Hi Steer Knuckle This allows you to run heim rod ends and strengthen your steering The knuckle allows you to run a separate tie rod and drag link

    Teraflex

    Teraflex Hi Steer Knuckle, D30 & D44

    This is the TeraFlex Hi Steer Knuckle for the Dana 30 and Dana 44 front axles.Why Hi Steer? Hi Steer corrects all the issues associated with the steering on lifted vehicles by lifting up and leveling out the drag link (the link from steering box to...

    $534.99
  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

    This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle width and...

    $999.99 - $1,029.98
  • Currie Extreme Duty CrMo steering for the Jeep JK, 9703 Close up of the H.D. forged end used on this system Mounting bracket for the steering dampener Exploded view of the Currie rebuildable Tie Rod End. CE-9703 Currie Extreme Duty Steering Kit

    RockJock

    Jeep JK Extreme Duty CrMo Steering, Rock Jock

    This is the Currie Rock Jock Currectly nc® Extreme Duty modular tie rod and drag link steering system for all models of Jeep JK Wrangler vehicles. This CE-9703 steering kit features: 1-5/8" diameter 4130 CrMo heat treated tubing for both the tie...

    $1,411.00
  • GenRight Billet twisted pitman arm Heat Treated Chromoly provides incredible strength and durability. GenRight Billet twisted pitman arm Arm is twisted for optimal geometry GenRight Billet twisted pitman arm

    GenRight

    Billet Chromoly Twisted Pitman Arm

    This is the new and innovative GenRight Billet Twisted Pitman Arm that allows for 3.5" more up travel. This arm was designed as part of our new low ride height TRACER Suspension system for the Jeep LJ. It corrects the angle issues inherent in...

    $899.99
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
36 of 53 Items