null

MADE IN THE USA

phone: (805) 584-8635

Jeep YJ 87-'95

108 of 253 Items
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height...

    $59.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

    This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • Sale
    SSV connector for the MRB3 to run an external amp.

    SSV Works

    RCA Wire Harness for Amplifier

    Already have a MRB3 system but want to add more speakers or a subwoofer? Then you will need this harness to connect an amplifier to power the additional speakers or subwoofer. Simply plug this harness into your MRB3's "AMP OUT" plug and the other end...

    $9.99
    Add to Cart
  • GenRight Off Road Rear Sway Bar Kit for the Jeep TJ, LJ or YJ Jeep Rear Sway with coil over shock at full droop. Here you can see frame mount for rear sway bar with (white) bearing. Here you can see the axle side mounting and how link fits.

    GenRight

    TJ/LJ/YJ Sway Bar Kit - Rear

    This is the GenRight rear sway bar kit to fit a Jeep TJ, LJ or YJ. This kit was designed to add stability to your lifted or long travel Jeep. It is a weld-on kit. Our sway bar is about 30% stiffer than other brand Anit-Rock type sway...

    $849.99
    Add to Cart
  • Sale
    Reverse, full manual 4L80 Transmission with 4 WD case

    Maximum Transmissions

    4L80 4-Speed Auto Transmission

    This is a full race 4L80 4-speed automatic transmission built by Maximum Transmissions. GM originally built this heavy duty transmission off their popular Turbo 400 3-speed transmission. This is the same transmission we put in every V8 Tracer build...

    $8,999.99
    Add to Cart
  • Atlas 3.0 Transfer Case, back Atlas 3.0 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 3.0:1 Transfer Case

    This is an Atlas II, 2 Speed Transfer Case with 3:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years! We order these cases with the following specs: 3.0:1 ratio 1310 CV Yokes Twin stick...

  • GenRight Stubby Jeep YJ front Bumper, steel GenRight Stubby YJ front Bumper, on Tony's Jeep GenRight Stubby Jeep YJ front Bumper, painted silver. GenRight Stubby Jeep YJ front Bumper with winch and lights

    GenRight

    YJ Stubby Style Front Bumper - Steel

    This is the GenRight Off Road heavy duty steel Stubby front bumper with for Jeep Wrangler YJ (1987 - 1995). This is our high quality, high clearance Stubby front bumper. It is perfect for your favorite trail as it will not get caught...

    $449.99
    Add to Cart
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • Factor 55 Flat Link in Red The flatlink is available in these colors Factor 55 FlatLink Pictured here on our Terremoto Jeep JK This is how a Factor 55 Flatlink is used Prolink and Flatlink side by side

    Factor 55

    Factor 55 Flat Link

    This is the Factor 55 Flatlink. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring.   The FlatLink shackle...

    $146.00
    Choose Options
  • YJ Stubby Front Bumper - Aluminum YJ Stubby Front Bumper - Aluminum YJ Stubby Front Bumper Installed (stubby steel painted silver is pictured)

    GenRight

    YJ Stubby Front Bumper - Aluminum

    This is the GenRight Off Road Aluminum Stubby front bumper with for Jeep Wrangler YJ (1987-1996). This is our super lightweight, high quality, high clearance front bumper. It is perfect for your favorite trail as it will not get caught on any obstacles...

    $599.99
    Add to Cart
  • Hood Louver Set, 2pc Short - Black

    GenRight

    Hood Louver Set, 2pc Short - Black

    This is the Gen-Right Off Road 2 pc "short" hood louver set for any Jeep or other vehicle with a relativly flat hood.These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set.This 2pc kit is: 2 short louvers,...

    $89.99
    Add to Cart
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
    Add to Cart
  • GenRight Twisted Pitman Arm for the Jeep TJ, LJ, YJ Arm is twisted for optimal geometry and range of motion GenRight Twisted Pitman Arm GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Shown here mounted on a Jeep TJ steering box

    GenRight

    GenRight Twisted Pitman Arm

    This is the innovative Twisted Pitman Arm from GenRight Off Road! This will correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). How? We twisted (or rotated) the drag link mounting...

    $399.99
    Add to Cart
  • Factor 55 Hawse Fairlead, 1.5 Here you can see both 1.0 and 1.5 versions of the Factor 55 fairleads Sideview of the 1.0 and 1.5 fairleads This is how the rope goes through the fairlead

    Factor 55

    Factor 55 Hawse Fairlead, 1.5

    This is the Factor 55 1.5" thick Hawse Fairlead. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Factor 55 introduced a new line of Aluminum Hawse Fairleads in 2016. The 1.5 fairleads are CNC machined from 1.5" thick USA 6061...

    $110.00
    Add to Cart
  • Factor 55 Hawse Fairlead, 1.0 Here you can see both 1.0 and 1.5 versions of the Factor 55 fairleads Sideview of the 1.0 and 1.5 fairleads This is how the rope goes through the fairlead

    Factor 55

    Factor 55 Hawse Fairlead, 1.0

    This is the Factor 55 1" thick Hawse Fairlead. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Factor 55 introduced a new line of Aluminum Hawse Fairleads in 2016. The 1.0 fairlead is CNC machined from 1" inch thick USA 6061-T6...

    $88.00
    Add to Cart
  • PRP Enduro Elite Seat Enduro Elite Suspension Seat PRP Seat Sizing

    PRP

    PRP Enduro Elite Series Reclining Seat

    The Enduro Elite is PRP's newest Reclining Suspension Seat. Made to replace your stock Jeep or truck seats, the Enduro Elite is PRP's best reclining seat! It supplies additional comfort for taking that daily driver off-roading. Included is our...

    $869.99
    Add to Cart
  • PRP Enduro or Daily Driver Seat PRP Enduro Seats in our GenRight Jeep TJ Seat sizing

    PRP

    PRP Enduro Recliner Seat

    This is the New PRP Euduro Recliner Seat in two tone. This the same seat we use in all the GenRight Jeeps. These seat are top quality and will feel as good at the end of the day as they did at the beginning. This is the same seat we...

    $619.99
    Add to Cart
  • GenRight Logo Patches, available in red, white, & blue, or black & white. Sold each. Shown here on a dog jacket GenRight GR Patches

    GenRight

    GenRight Logo Patch (Choose Color)

    This is the GenRight Off Road "GR" Patch. This patch can be added to anything you want to dress up (Beanie, Hats, Jackets, etc.) with a cool GR logo'd patch!FEATURES: 3" long x 2" wide. Your choice of: Red, White & Blue (rubber patch) or Black...

    $4.99
    Choose Options
  • TJ/LJ/YJ Rear Bumper Plate w/ Step & Tow Points Side Profile

    GenRight

    TJ/LJ/YJ Rear Bumper Plate w/ Step & Tow Points

    This is the GenRight Rear Bumper Plate for anyone who wants the BEST departure angle possible, as it only sticks back 3/16" (the thickness of the material) behind the rear of the Jeep TJ, LJ or YJ.It is designed to beef-up your rear frame...

    $399.99
    Add to Cart
  • Atlas 3.8 Transfer Case, back Atlas 3.8 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 3.8:1 Transfer Case

    This is an Atlas II, 2 Speed Transfer Case with a 3.8:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years!   We order them with the following specs:   3.8:1 ratio 1310 CV Yokes Twin...

  • Jeep YJ Hi-Fender Inner Kit (TFF-4HIF) Jeep YJ Hi-Fender Inner Kit (TFF-4HIF)

    GenRight

    Jeep YJ Hi-Fender Inner Kit

      This is the Jeep YJ Aluminum Inner Hi-Fender Well Kit from GenRight Off Road. They are specifically for Jeep YJ with our Aluminum Hi-Fenders Installed It is constructed of lightweight Aluminum alloy and is designed to work with our newest...

    $349.99
    Add to Cart
  • Currie 1 Ton unit bearing with 1/2" wheel studs Same unit we use on Currie front axles.

    Currie Ent

    Currie Front Unit Bearing Hub, 1/2" Studs

    This is the Currie Extreme Unit Bearing - Heavy Duty 1/2" Studs. This is the same hub we run on all our Currie Axles. Features: Easy to replace Extreme version of the 1 ton Unit Bearing 35 Spline Accepts locking hub (not included, as...

    $524.99
    Add to Cart
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
    Choose Options
  • Interior door handle for Jeep Wrangler YJ Metal door handle for the Jeep YJ, interior Dimensions of GenRight YJ interior door handles

    GenRight

    YJ Door Handles, Interior

    This is a high quality metal interior door handle for the Jeep Wrangler YJ. Built to last. It easily replaces the stock ones worn or broken handles. These are the same handles Tony is running on his Foreshock YJ. Features: Laser Cut and formed...

    $39.99
    Add to Cart
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • Torco HPG 75W-90 synthetic gear lube

    Torco

    Torco HPG 75W-90 Synthetic Gear Oil

    HPG is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. Recommended for use in stock or re-geared Jeep JK, JL or JT differentials. Used in all forms of off-road...

    $12.95
    Add to Cart
  • Torco SR-1 10W-30 Synthetic Engine Oil

    Torco

    Torco SR-1r 10W-30 Synthetic Engine Oil

    This is the Torco 10W-30, SR-1r 100% Synthetic motor oil is one of our most popular oils. It's a selective cross blend of highly advanced 100% synthetic base oils and proprietary additives aimed at power efficiency and engine protection. SR-1’s...

    $14.20
    Add to Cart
  • Torco HPG 75W-140 synthetic gear lube

    Torco

    Torco HPG 75W-140 Synthetic Gear Oil

    HPG is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. Recommended for use in stock or re-geared Jeep differentials. Used in all forms of off-road &...

    $13.95
    Add to Cart
  • Torco Synthetic 85W-140 gear lube

    Torco

    Torco RGO 85W-140 Synthetic Gear Oil

    We run Torco Synthetics because they are the best! RGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. It is formulated using a combination of Group IV/V...

    $14.25
    Add to Cart
108 of 253 Items

© 2023 GenRight Offroad All rights reserved. | Sitemap