null

MADE IN THE USA

QUESTIONS? CALL US  805-584-8635

Our founder, Tony Pellegrino took from his years of off-road racing his Unlimited Class Ultra4 off-road racer and used that as the performance standard for this suspension. This was a challenge since the 4 door is a long (and vulnerable) wheelbase vehicle… So we brought to market an unprecedented completely FLAT belly system that has the lower control arms tucked into the middle for protection from trail hazards (by using our unique rear mounted fuel tank). Combine that with 2.5" or 3.0" coil over shocks and you have the ultimate combination... a no compromise suspension for your JK!

This is not a "bolt-on kit"! It's designed as a system, to provide smooth, non-binding performance both on and off road.

 

AND, we have expanded the kit to be available in stages, making it MUCH more affordable, while giving you the quality and performance that comes with the GenRight Elite Suspension for your Jeep Wrangler.

 

The GenRight suspension is welded to the frame for extreme durability, and replaces ALL the weak factory brackets and mounts with new heavy duty 1/4" thick laser cut mounts!

We worked with the original factory Jeep CAD files to design this system and place the shocks in the optimal position to provide your vehicle the best articulation and dampening control for the best and most balanced ride. 

 

72 of 72 Items
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
  • GenRight's mounting kit for the custom Griffin Radiator JK V8 radiator Shown here mounted in the GenRight Terremoto Jeep JK Shown here mounted in the GenRight Terremoto Jeep JK with LS Shown here stuffed into the factory core support (must be modified)

    GenRight

    JK Elite Aluminum Radiator Mounts for LS Engine

    This is a custom designed mount (like the one we are running in the Terremoto Jeep JK) to hold the GenRight spec Griffin Aluminum radiator. We take out all the guess work and provide you everything you need to swap over to a super efficient aluminum...

    $429.99
  • GenRight's Hi-Steer Arm for the Elite Suspension Here is the arm on the Currie knuckle with heim steering Here you can see the hi-steer arm on the Currie axle and knuckle.

    GenRight

    Hi-Steer Arm for Currie RockJock Knuckle

    This is the GenRight modified Currie Hi-Steer arm. It has been modified to have the correct geometry to work with the GenRight JK Elite Suspension System. It positions the drag link in the proper location to match the pitman arm length so you can...

    $349.99
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $329.99
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $329.99
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge / Truss, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
  • Heavy Duty Currie Fabricated Diff Cover Hardware, fill plug and gasket are included. Currie Fabricated Diff Cover for 60 or 70 axles.

    Currie Ent

    Currie Fabricated Diff Cover 60 or 70

    This is the Currie Heavy Duty Fabricated Differential Cover. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased from...

    $244.99
  • Forged 1350 Yoke for Currie 60 or 70, 35 Splines, front or rear

    Currie Ent

    Forged 1350 Yoke for Currie 60 or 70, 35 Spline

    This is a Forged 1350 Yoke for Currie hi-pinion axles. 35 Splines. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased...

    $239.99
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
  • GenRight's aluminum fuel filler bezel Installing the bezel on the side of a Jeep JK Fits the Dry Break quick fill perfectly Removable cap for filling when dry break is not available.

    GenRight

    Aluminum Fuel Fill Bezel

    This is an aluminum fuel bezel for the DBC-400 dry break (quick fill). Originally intended for use with the GenRight Race legal Fuel Cell, but it can be adapted to the side of any vehicle. This is the same thing we use on the GenRight Terremoto Jeep JK...

    $199.99
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
  • CE-9110T Johnny Joint Tool for Rebuilds Tool shown here compressing the joint to remove the retainer clip Rock Jock Johnny Joint Sizing Chart

    RockJock

    Tool for Rebuilding 2.5" Johnny Joint

    RockJock's Johnny Joint Tool is designed to make assembly OR disassembly of our 2-1/2 in. Johnny Joint Rod Ends simple! For Johnny Joint rebuilds and repairs, this tool can be used either in a bench vise, or it is compact enough that it may also be...

    $150.00
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
  • Currie Blank Hi-Steer Arm, Drivers Side (Left). Shown here bolted to a front axle assembly.

    Currie Ent

    Currie Hi-Steer Arm, Driver (LEFT) Side

    This is the Currie Hi-Steer Arm, Driver (LEFT) Side of a front axle. Knuckle must be machined to fit this Hi-Steer arm. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70...

    $135.99
  • Currie Blank Hi-Steer Arm, Passenger Side (Right). Shown here bolted to a front axle assembly.

    Currie Ent

    Currie Hi-Steer Arm, Driver (RIGHT) Side

    This is the Currie Hi-Steer Arm, PASSENGER (RIGHT) Side of a front axle. Knuckle must be machined to fit this Hi-Steer arm. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70...

    $135.99
  • Here you can see the slight bends in the 1/4" thick wall CrMo tubing Jeep JK Frame Side Trac Bar from the GenRight Elite 3 Link Suspension kit 1/4" thick frame side mount fits the frame perfectly Shown here how it fits over the steering box frame sleeves. Double shear 9/16" Grade 8 Bolt

    GenRight

    JK Elite Frame Side Trac Bar Mount (2 or 4 Door)

     This is a Heavy Duty Frame Side Front Trac Bar Mount for the Jeep Wrangler JK, from GenRight Off Road.. It is part of our long travel GenRight Elite Coil Over Suspension System. These are the same parts included in our front 3 link kit and the...

    $124.99
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Elite Axle Side Trac Bar Mount (2 or 4 Door JK)

    This is a Heavy Duty GenRight axle side Trac Bar mount from the Elite Suspension system or the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) or Dynatrac front axles. It keeps the front axle under...

    $99.99
  • GenRight's metal reservoir mount from the EXS. Side view of GenRight's metal reservoir mount from the EXS. Shown here mounted on Terremoto's frame. On GenRight Terremoto On GenRight EXS Builds

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair) we use on our EXS frame/builds. They are Laser Cut and CNC formed from 1/8" steel, so they will not break. They can be bolted on or welded on the body or chassis and...

    $79.99
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
  • Fish Plate Gussets for the GenRight JK Elite Rear Crossmember. Fish Plate Gussets being welded on to the GenRight JK Elite Rear Crossmember. How they look once welded into place.

    GenRight

    Fish Plate Gusset for JK Elite Rear Crossmember

    This is Fish Plate Gusset to upgrade your GenRight JK Elite rear cross member. Prefect upgrade for anyone with a V8 in their Elite equipped Jeep JK. Welds on to outside of rear cross member (as pictured) to increase strength and reduce flex for the...

    $49.99
  • Tool to remove JK Elite front cross member Simply thread into each side of JK Elite cross member and it pulls the cross member out of the mount on the frame.

    GenRight

    JK Elite Front Cross Member Removal Tool

    This is the special bolt "tool kit" needed to remove the Elite Front cross member from GenRight's Elite JK Suspension System. Simply works by evenly dropping the crossmember out from the frame mounts. A real challenge without these special bolts...

    $39.99
  • CE-9110RK Rebuild Kit for 2.5" Johnny Joint As delivered CE-9110RK Rebuild Kit for 2.5" Johnny Joint Rock Jock Johnny Joint Sizing Chart Rebuild kit for the Johnny Joint CE-9114 that looks like this

    RockJock

    Rebuild Kit for 2.5" Johnny Joint

    This is a REBUILD KIT for a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie). This patented design has a special compound urethane cup(s) which absorbs the high impact loads from damaging suspension mounts. This is the same joint used on...

    $21.00
  • 4 High Quality GenRight ELITE Suspension Dome Stickers for your Jeep

    GenRight

    GenRight "ELITE" Suspension Dome Stickers

    This is (4) GenRight "ELITE" Suspension DOME stickers for your Jeep. These are the perfect size for your Jeep to show off your Elite Suspension system. High Quality. Chemical resistant. UV protected for long life and durability. Sold four (4) per...

    $10.00
72 of 72 Items