null

MADE IN THE USA

Our suspension kits have been developed over 10 years, 480 trails, countless vehicles, and multiple King of the Hammers races. We have taken our knowledge and transformed it into packages to provide our customers with the best suspension available in the industry. This includes a variety of products ranging from complete 3 or 4-link suspension to individual brackets and tabs for the DIY fabricators, both of which will save you time and money.

  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $399.99
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
  • Sale
    Limit strap Example of center mounted limit strap Example of mounting a limit strap to protect front shock Example of mounting a limit strap to protect the rear shocks Limit strap tab welded to the in inside of the frame.

    PRP

    PRP Quad Wrap Limit Strap (6"-20")

    This is a heavy duty competition quality "quad wrap" type limit strap. We recommend these straps be used at each wheel and on wheelbases shorter than 110", in the centers of the axles. This will remove all the unnecessary stress from your shocks and...

    $29.99
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

    This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were...

    $179.99 - $189.99
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
  • Sale
    We offer 2 different tabs with radius on bottom to fit your project. Super strong, these mounts are laser cut and formed from 3/16" thick cold rolls steel. Shown here welded on a tube. Shown here welded onto an axle (knuckle).

    GenRight

    Shock Mounting Tabs (Pair)

    These are top quality shock mounting brackets from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel and CNC formed into shape for easy installation. They are perfect for lower mounting of coil over (or other high...

    $14.99
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
  • 1/4" Thick Straight Tab (Pair) 1/2" Diameter Hole Typical installation as a lower shock mounts Tab welded onto the inside of the frame

    GenRight

    1/4" Thick Straight Tab (Pair)

    This is a top quality "straight" mounting tab from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for mounting limit straps or other things on your Jeep. Features: Material - 1/4"...

    $11.99
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
  • RSM-2150 Rear Coil Spring correction Kit for the Jeep TJ This is the mounting location of the new brackets AFTER GenRight Coil Correction kit is installed BEFORE Coil Correction kit is installed Carefully cut off and clean the frame for the new brackets to be mounted

    GenRight

    Rear Coil Spring Correction Kit

    This is a rear coil spring mounting kit or it can be used as a coil spring correction kit On a Jeep TJ or LJ. This is a low cost way to move the coil spring back on the frame is laser cut and formed from heavy duty 3/16" and 1/4" thick steel and...

    $149.99
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
  • 1/4" Thick Radius Tab (Pair)

    GenRight

    1/4" Thick Radius Tab (Pair)

    These are top quality Radius Tabs from GenRight Off Road. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for mounting limit straps or other things on curved surfaces (axle tubes or knuckles). Features: Material...

    $11.99
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
  • GenRight Twisted Pitman Arm for the Jeep TJ, LJ, YJ Arm is twisted for optimal geometry and range of motion GenRight Twisted Pitman Arm GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Shown here mounted on a Jeep TJ steering box

    GenRight

    GenRight Twisted Pitman Arm

    This is the innovative Twisted Pitman Arm from GenRight Off Road! This will correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). How? We twisted (or rotated) the drag link mounting...

    $399.99
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

    This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $339.99
  • GenRight Off Road Rear Sway Bar Kit for the Jeep TJ, LJ or YJ Jeep Rear Sway with coil over shock at full droop. Here you can see frame mount for rear sway bar with (white) bearing. Here you can see the axle side mounting and how link fits.

    GenRight

    TJ/LJ/YJ Sway Bar Kit - Rear

      This is the GenRight rear sway bar kit to fit a Jeep TJ, LJ or YJ. This kit was designed to add stability to your lifted or long travel Jeep. It is a weld-on kit. Our sway bar is about 30% stiffer than other brand Anit-Rock type...

    $849.99
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
  • KING 2.0" Emulsion Coilover Shock An o-ring on the cap keeps dust and dirt from contaminating the valve Tapered spring cup for more clearance during articulation Single allen pinch bolt to release the preload collar. Shown here on the front of a Jeep Wrangler.

    King Shocks

    KING 2.0" (14" Stroke) Emulsion Coilover Shocks

    This is the KING Brand of 2.0" diameter Coil Over Shock, without remote reservoir. These are the best and most quiet coil over shocks you can buy. KING Shocks have a great name in the off-road world. They build an extremely high quality...

  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
  • 1/4" Thick Saddle Gusset (Pair)

    GenRight

    1/4" Thick Corner Gusset (Pair)

    This laser cut 1/4" thick Heavy Duty Steel Corner Gusset is perfect for reinforcing roll cage or chassis corners (as pictured).Size: Approx 2"x 2"Sold as a pairNo returns accepted after they have been tacked in place!

    $14.99
  • Sale
    Brake line mounting tabs (Pair) BKT-1250 GenRight Brake line mounting tab

    GenRight

    Brake Line Tabs (Pair)

    This is a top quality "straight" mounting tab from GenRight Off Road. They are Laser cut from Heavy Duty 1/8" thick plate steel.Size: 1" x 1-5/8" long.They are perfect for mounting brake lines or other things on your Jeep. 3/8"...

    $3.99
  • Jeep TJ/LJ/YJ/CJ-7 Front 3-Link Kit GenRight Front 3-Link w/ Links Installed on Jeep TJ GenRight Front 3-Link w/ Links Installed on BowTie GenRight Front 3-Link Suspension Kit (Skid Plate not Included)

    GenRight

    Front 3-Link Kit (Links Optional)

     Front 3-Link Kit for Jeep TJ, LJ, YJ & More Bind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable This is the 3 Link kit from our Legend Suspension kit. It is called 3 link, but is technically a 4 link when you include...

    $1,599.99 - $2,349.99
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99