• GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.


    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

  • Universal LED License Plate Light w/ Brake Light LED 3rd brake light on at night Here you can see the LED license plate light and 3rd brake light on at night Close up view of how this compact LED light looks and mounts. LED1650 license plate light with 3rd brake light.


    LED License Plate Light w/Long Harness

    This is a universal LED License light that cleanly mounts behind your rear license plate (that is necessary to be legal on the street). Designed to be used when running LED tail lights which eliminate the normal license plate light (off the...

  • GenRight Jeep TJ floor plate assembly This is where it is installed in the rear of the cargo area floor of an '05 TJ When the cover plate is installed it only sticks up 1/8" above the top of the ribs in the floor


    Fuel Pump Access Panel for the Jeep TJ, YJ and CJ-7

    This is the GenRight Off Road rear floor access plate/mount for the Jeep Wrangler TJ, Jeep YJ or Jeep CJ-7 (all models 1976 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without dropping the entire...

  • Sale
    GenRight's LED Stealth Side Marker Light Kit Here you can see how the side marker light hides under the top tube "stealth" like. Clean mounting of LED side marker lights Amber LED side marker lights on a Jeep TJ


    LED Stealth Marker & Blinker Light Kit, 4 light

    This is the GenRight Off Road 4 light Stealth Side Marker Light Kit. It includes the hard to find super bright amber colored LED's. It can be used as a front blinker & running light. GenRight has packaged this Stealth L.E.D...

  • Maxbilt LED Tail Lights are surface mount, no drilling. Here you can see running and stop lights at night. Shown here on the GenRight Terremoto JK 4 stages on the LED tail lights (off, stop, running and reverse)


    Maxbilt LED Tail Lights, Surface Mount

    This is a surface mounted LED tail light from Maxbilt LED (Light Emitting Diode) tail light for a Jeep TJ, LJ, YJ or CJ-7 (and JK in our corner guards). This is a manufacturer for GenRight that offers a no bones about it lifetime warranty!...

  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension


    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

  • Corner Guard Backing Plates for any GenRight Corners Shown here on the inside of an LJ tub to reinforce the side Corner Guard Backing Plate Shown here installed


    Corner Guard Backing Plates

    This is the CNR-7000, Corner Guard Backing Plates (pair) by GenRight Off Road. These are used to reinforce the top AND side mounting area of the Corner Guard on your Jeep. Simply put them on the inside of the tub, in place of the fender washers. They...

  • Latch Pin for Tire Carrier


    Latch Pin for Tire Carrier

    This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier.This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

  • Sale
    3/4" LED Side Marker Lights The LED side marker light cleanly mounts inside the inner fender on a Jeep JK Cleanly mounted LED side marker lights on a Jeep JK When mounted they are nearly flush They fit right in the holes on our front fenders


    LED 3/4" Round Marker Light, Amber

    This is a top quality super bright amber colored LED. It is perfect for being used as a front blinker or running light. This is the same LED light we chose to be part of our Stealth Side Marker Light kit. FEATURES: Designed to fit...

  • TJ/LJ Whole Hood Louver - Black


    TJ/LJ Whole Hood Louver - Black

    This is the GenRight Off Road Whole Hood Louver for a Jeep TJ/LJ.This 1 piece design is stylish and easily distinguishable. Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each louver...

  • Mesh panel helps let heat out of engine compartment Hi Fenders and Hi Inner fenders, shown here on the GenRight Tuxedo LJ Jeep Wrangler TJ (or LJ) Hi-Fender Inner Fender Kit, aluminum TJ/LJ Hi-Fender Inner Fender Kit shown with GenRight hi-fenders with stock coil springs


    TJ/LJ Hi-Fender Inner Fender Kit

    This is the Hi-Fender Inner Fender Well Kit from GenRight Off Road, for a Jeep Wrangler TJ or LJ. Updated in 2022 with a mesh panel to vent heat from the engine compartment. By using these inner fenders, it eliminates the need to cut the stock...

  • Updated design features a rubberized "GR" logo patch Patch detail Great for the driver and passenger! Perfect for leaning out to see where the tire is! Padded arm rest even on JL half doors


    Padded Arm Rest for Half Doors (Pair) Black

    This is the cool Jeep accessory you have been looking for! Tired of leaning your arm on a thin or sharp edged metal half door? These padded arm rests will add a new level of comfort to your next trail ride. It simply fits into the existing holes...

  • TJ/LJ Whole Hood Louver TJ/LJ Whole Hood Louver Installed


    TJ/LJ Whole Hood Louver

    This is the GenRight Off Road Whole Hood Louver for a Jeep TJ/LJ.This 1 piece design is stylish and easily distinguishable.Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each louver...

  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers


    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

  • LED Dome Light with Cage Clamps and Billet Mount parts LED Dome Light mounted on a roll cage with billet cage mounts LED Dome Light with Cage Clamps and Billet Mount LED Dome light on a GenRight roll cage LED Dome light on a GenRight roll cage

    SSV Works

    Billet Dome Light with Tube Clamps

    This is a nice quality heavy duty LED dome light for roll cages. Now you can get light anywhere you need it in your Jeep with this cage mounted LED interior light! This nice bright "hyper-white" dome light has 6-LED's (3 per side) that produce 300...

  • Genright's B-Pillar Removal Kit for Jeep JK Shown here with Upper B Pillar removed, gives it that clean Jeep look! B Pillar Kit Installed Rubber lined B Pillar to prevent chaffing Indexed hole for proper alignment


    Jeep JK Detachable B-Pillar Kit

      Do you want to make your Jeep look cool like the GenRight Terremoto JK? This kit of laser cut and formed parts allows you to cut off your B Pillar even with the top of your half doors for a smooth, sleek look! Yet still allow you to use of the...

  • GenRight Universal Large Cargo Rack (ACC-1000) Riveted Aluminum Badge on the black powder coated finish ACC-1000 large cargo rack shown here in a Jeep Wrangler JLU Load up your Jeep JKU with up to 200lbs all your favorite camping gear! Cargo rack installed on a Jeep LJ Unlimited with a GenRight Roll Cage


    GenRight Cargo Rack for Jeep JL/JK/TJ/LJ/YJ & CJ-7

    This is a universal Cargo Rack for your Jeep Wrangler from GenRight Off Road. This rack was designed to maximize the storage in your rear cargo section of your vehicle while dividing the cargo area into 2 sections! Allows easy access to your...

  • GenRight's rear cover plate and license plate mount for the center of JK tail gate Shown here in silver on the back of the GenRight Terremoto Jeep JK Shown here in black, ready to mount the rear license plate Shown here being installed over the factory vent in the rear door Shown here in a textured powder coating


    JK Tailgate Plate and License Plate Mount

    Clean up the way the back of your Jeep looks with this Aluminum tailgate plate for your Jeep JK from GenRight Off Road. It simply covers the factory vent and relocates the rear license plate to the center of the rear door on the Jeep JK. It is...

  • LED Back Up Light (Pair) We used 4 of these in the rear bumper on the GenRight Growler YJ. Here is a good view of the rear bumper plate on the GenRight Bowtie TJ.


    LED Back Up Light (Pair)

    This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are installing...

  • Sale
    5 Pin TJ / LJ Flasher Unit


    5 Pin TJ / LJ '01+ Flasher Unit

    This is a modified 5 pin electronic flasher unit to make the turn signals "flash" with LED lights. This flasher is specifically designed to work in all 2001 - 2006 Jeep Wrangler TJ & LJ's.Please order when using our: LED-1100,...

  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve


    Ball Valve Parking Brake

    This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were...

    $179.99 - $189.99
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines


    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

  • RBB-1100 GenRight's rear bumper to frame tie in kit RBB-1100 installed on a Jeep to reinforce rear cross member/bumper mounts


    Rear Frame to Bumper Tie-In Bracket Kit

    This is the GenRight Rear Frame to Bumper Bracket kit for anyone who wants to beef up the way the rear bumper and cross member tie in the the rear section of the frame. We recently added a gusset to the bracket in order to further reinforce the...

  • GenRight 3 piece long hood louver set in black Proper hood placement How the underside of the hood looks after mounting Installed on a Jeep Liberty


    Hood Louver Set, 3pc Long - Black

    This is the GenRight Off Road 3pc "long" hood louver set.Works great on Jeep TJ, LJ or YJ.They can be mounted in many different positions on the hood and are sold as a 3 piece set.This 3pc kit is: (1) Front louver has louvers in traditional direction...

  • SSV MRB3 Dash Mount Plate SSV MRB3 Dash Mount Plate, Rear View


    GenRight SSV MRB3 Dash Mount Kit

    This GenRight Off Road manufactured mount allows you to mount your SSV Works MRB3 Audio System (display and amp) in a clean manner and in a compact area. FEATURES: Mounts into factory radio opening in the dash of a Jeep TJ or LJ. Made from .080...

  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out


    Aluminum Gas Cap & Filler Kit w/ Vent

    This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire assembly is...

  • Sale
    SSV MRB3 Display / Controller is fully sealed and has a back lit LED screen SSV MRB3 Bluetooth System Controller w/Screen with 4 Channel Amp Shown Installed in a Jeep Wrangler TJ using the GenRight aluminum radio plate Shown Installed in a Jeep Wrangler TJ on a black GenRight radio plate The LCD display is compact.

    SSV Works

    SSV MRB3 Bluetooth Audio w/ Screen & Amp

    Looking for a weather & dust proof solution for your Jeep? Well, this is Tony's favorite! This is a surface mounted display that replaces the traditional "stereo head unit" Your Jeep's new "stereo music" will be connected via Bluetooth...

    Was: $299.99
    Now: $229.99
  •  Bluesea Below Deck 12V DC & USB Power Panel 12V DC & Dual 2.1A USB Chargers Built in 2A Fuse & 15A Circuit Breaker Dimensions


    Bluesea Below Deck 12V DC & USB Power Panel

      This is a marine quality Universal 12V power panel for your Jeep Wrangler/Jeep Rubicon. FEATURES: The Blue Sea "Below Deck Panel" is a compact, easy to install DC charging center. The 12 Volt Cig Socket from Blue Sea Systems is designed to...

  • GenRight's Hi Lift Jack Mounts Here you can see customer mounted the jack to the outside Another view of the clamps holding the jack onto the tube


    Hi Lift Jack Tube Mounts, 1-3/4"

    This a pair of tube clamps with a threaded 3/8" stud. Primarily used to mount a Hi-Lift jack on the tubes of our Jeep rear tire carriers, front bumper or roll cages. This a super clean way to mount accessories on any 1-3/4" diameter...

  • YJ Whole Hood Louver - Black


    YJ Whole Hood Louver - Black

    This is the GenRight Off Road Whole Hood Louver for a Jeep YJ.This 1 piece design is stylish and easily distinguishable.Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each louver is...