null

MADE IN THE USA

phone: (805) 584-8635

Jeep TJ 97-'06

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

36 of 318 Items
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

    This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The cross...

    $249.99
    Add to Cart
  • Universal LED License Plate Light w/ Brake Light LED 3rd brake light on at night Here you can see the LED license plate light and 3rd brake light on at night Close up view of how this compact LED light looks and mounts. LED1650 license plate light with 3rd brake light.

    GenRight

    LED License Plate Light w/Long Harness

    This is a universal LED License light that cleanly mounts behind your rear license plate (that is necessary to be legal on the street). Designed to be used when running LED tail lights which eliminate the normal license plate light (off the...

    $49.99
    Add to Cart
  • GenRight Jeep TJ floor plate assembly This is where it is installed in the rear of the cargo area floor of an '05 TJ When the cover plate is installed it only sticks up 1/8" above the top of the ribs in the floor

    GenRight

    Fuel Pump Access Panel for the Jeep TJ, YJ and CJ-7

    This is the GenRight Off Road rear floor access plate/mount for the Jeep Wrangler TJ, Jeep YJ or Jeep CJ-7 (all models 1976 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without dropping the entire...

    $169.99
    Add to Cart
  • Sale
    GenRight's LED Stealth Side Marker Light Kit Here you can see how the side marker light hides under the top tube "stealth" like. Clean mounting of LED side marker lights Amber LED side marker lights on a Jeep TJ

    GenRight

    LED Stealth Marker & Blinker Light Kit, 4 light

    This is the GenRight Off Road 4 light Stealth Side Marker Light Kit. It includes the hard to find super bright amber colored LED's. It can be used as a front blinker & running light. GenRight has packaged this Stealth L.E.D...

    $60.00
    Add to Cart
  • Maxbilt LED Tail Lights are surface mount, no drilling. Here you can see running and stop lights at night. Shown here on the GenRight Terremoto JK 4 stages on the LED tail lights (off, stop, running and reverse)

    Maxbilt

    Maxbilt LED Tail Lights, Surface Mount

    This is a surface mounted LED tail light from Maxbilt LED (Light Emitting Diode) tail light for a Jeep TJ, LJ, YJ or CJ-7 (and JK in our corner guards). This is a manufacturer for GenRight that offers a no bones about it lifetime warranty!...

    $234.99
    $199.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading which...

    $66.00
    Choose Options
  • Corner Guard Backing Plates for any GenRight Corners Shown here on the inside of an LJ tub to reinforce the side Corner Guard Backing Plate Shown here installed

    GenRight

    Corner Guard Backing Plates

    This is the CNR-7000, Corner Guard Backing Plates (pair) by GenRight Off Road. These are used to reinforce the top AND side mounting area of the Corner Guard on your Jeep. Simply put them on the inside of the tub, in place of the fender washers. They...

    $69.99
    Add to Cart
  • Latch Pin for Tire Carrier

    GenRight

    Latch Pin for Tire Carrier

    This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier.This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

    $14.99
    Add to Cart
  • Rocker Guard (rock slider) Backing Plates RCG5500 This is how they look after being installed and rhino lined. Here you can see how they are drilled and formed.

    GenRight

    TJ/YJ/CJ/LJ Rocker Guard Backing Plates

    This is a great upgrade for any of the GenRight rocker guards (aka: rock sliders). These backing plates are laser cut and formed from 3/16" thick steel for strength. It is similar to adding a big fender washer, but larger and stronger to pull more of...

    $39.99
    Add to Cart
  • Sale
    3/4" LED Side Marker Lights The LED side marker light cleanly mounts inside the inner fender on a Jeep JK Cleanly mounted LED side marker lights on a Jeep JK When mounted they are nearly flush They fit right in the holes on our front fenders

    GenRight

    LED 3/4" Round Marker Light, Amber

    This is a top quality super bright amber colored LED. It is perfect for being used as a front blinker or running light. This is the same LED light we chose to be part of our Stealth Side Marker Light kit. FEATURES: Designed to fit...

    $29.99
    Add to Cart
  • TJ/LJ Standard Inner Fender Kit Shown here with standard height GenRight tube fenders and coil over shocks Shown here with standard height GenRight tube fenders and coil springs

    GenRight

    TJ/LJ Standard Inner Fender Kit

    This is the Inner Fender Well Kit from GenRight Off Road, for a Jeep TJ or LJ that eliminates the need to cut the stock fender at all! This is a REAL inner fender. It will fully enclose the area (unlike other aftermarket inner fenders) to...

    $349.99
    Add to Cart
  • TJ/LJ Whole Hood Louver - Black

    GenRight

    TJ/LJ Whole Hood Louver - Black

    This is the GenRight Off Road Whole Hood Louver for a Jeep TJ/LJ.This 1 piece design is stylish and easily distinguishable. Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each louver...

    $199.99
    Choose Options
  • Cage to Frame Tie-in Kit Typical cage to Frame Tie-in Kit Installed

    GenRight

    Universal Jeep Cage to Frame Tie in Kit

    This is the GenRight universal frame tie-in kit to upgrade any brand cage through the floor and to the frame. This product is sold as a "builders" kit and needs to be fitted and finish welded to properly install it on your vehicle. It has been...

    $149.99
    Add to Cart
  • GST4053 and GST2053 Frame Sleeves w/ Hardware Close up of the sleeve on forward gas tank mount Sleeve shown here on tank mount. Shown here where they would go thru the frame, on each side

    GenRight

    GST4053 and GST2053 Frame Sleeves

    This is the Frame Sleeve kit for the Jeep TJ or YJ. It necessary if bolting up a GenRight gas tank through the factory frame to keep from crushing the frame when tightening to two forward bolts on the skid plate. One sleeve and bolt is used per side...

    $9.99
    Add to Cart
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $399.99
    Add to Cart
  • Mesh panel helps let heat out of engine compartment Hi Fenders and Hi Inner fenders, shown here on the GenRight Tuxedo LJ Jeep Wrangler TJ (or LJ) Hi-Fender Inner Fender Kit, aluminum TJ/LJ Hi-Fender Inner Fender Kit shown with GenRight hi-fenders with stock coil springs

    GenRight

    TJ/LJ Hi-Fender Inner Fender Kit

    This is the Hi-Fender Inner Fender Well Kit from GenRight Off Road, for a Jeep Wrangler TJ or LJ. Updated in 2022 with a mesh panel to vent heat from the engine compartment. By using these inner fenders, it eliminates the need to cut the stock...

    $349.99
    Add to Cart
  • Updated design features a rubberized "GR" logo patch Patch detail Great for the driver and passenger! Perfect for leaning out to see where the tire is! Padded arm rest even on JL half doors

    GenRight

    Padded Arm Rest for Half Doors (Pair) Black

    This is the cool Jeep accessory you have been looking for! Tired of leaning your arm on a thin or sharp edged metal half door? These padded arm rests will add a new level of comfort to your next trail ride. It simply fits into the existing holes...

    $149.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • TJ/LJ Whole Hood Louver TJ/LJ Whole Hood Louver Installed

    GenRight

    TJ/LJ Whole Hood Louver

    This is the GenRight Off Road Whole Hood Louver for a Jeep TJ/LJ.This 1 piece design is stylish and easily distinguishable.Plus it's functional, it will help keep your engine running cooler and it's easy to install!Each louver...

    $169.99
    Choose Options
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • Weld In Grab Handles for GenRight Jeep Roll Cages (Pair) These handles are perfect size for getting in your Jeep. Small handles pictured here on a GenRight cage in a JK Small handles work great front or rear! Small handles allow for maximum entry room into the Jeep

    GenRight

    Weld In Grab Handles for GenRight Roll Cages (Pair)

    This is a pair of "small" cage grab handles from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep JK, TJ,...

    $49.99
    Add to Cart
  • Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate

    GenRight

    Jeep TJ/LJ Steering Box Skid Plate

       This is the GenRight Steering Box Skid Plate to fit any '97-06' Jeep Wrangler TJ. Designed to protect the steering box and sector shaft from damage due to hitting obstacles on the trail. Features: Works with aftermarket front...

    $79.99
    Add to Cart
  • GenRight Universal Large Cargo Rack (ACC-1000) Riveted Aluminum Badge on the black powder coated finish ACC-1000 large cargo rack shown here in a Jeep Wrangler JLU Load up your Jeep JKU with up to 200lbs all your favorite camping gear! Cargo rack installed on a Jeep LJ Unlimited with a GenRight Roll Cage

    GenRight

    GenRight Cargo Rack for Jeep JL/JK/TJ/LJ/YJ & CJ-7

    This is a universal Cargo Rack for your Jeep Wrangler from GenRight Off Road. This rack was designed to maximize the storage in your rear cargo section of your vehicle while dividing the cargo area into 2 sections! Allows easy access to your...

    $419.99
    Choose Options
  • LED Back Up Light (Pair) We used 4 of these in the rear bumper on the GenRight Growler YJ. Here is a good view of the rear bumper plate on the GenRight Bowtie TJ.

    GenRight

    LED Back Up Light (Pair)

    This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are installing...

    $29.99
    Add to Cart
  • Sale
    GenRight's Standard Wheelbase Rocker Guards for the Jeep TJ, YJ, & CJ-7 Dimple Die step provides dependable traction Here you can see how cleanly they mount on the Jeep Slider bar is angled to increase clearance. This is a close up of the entry step (with dimple die grippers) on the GenRight rockers

    GenRight

    TJ/YJ/CJ Rocker Guards w/Bars (Standard Wheelbase)

      This is the GenRight rocker protection for the Jeep Wrangler TJ (1997 - 2006). Designed for the TJ, but can be trimmed to fit the Jeep wrangler YJ & CJ-7. These are the same 3/16" thick rocker guards we have used on all our GenRight Jeeps...

    Was: $800.00
    Now: $699.99
    Choose Options
  • GST-2003 GenRight Jeep TJ or LJ gas tank and skid plate Enduro Pictured is a GenRight gas tank with skid plate installed on a 2002 TJ Basic dimensions for the GST-2003 GenRight Jeep TJ or LJ gas tank and skid plate Reference dimensions to see if it will fit your build

    GenRight

    Jeep TJ/LJ Enduro Gas Tank & Skid Plate (24.5 Gal)

    Now you can explore with confidence! It is specifically designed as a heavy duty replacement for the factory Jeep fuel tank. The GenRight Crawler™ Enduro Gas Tank will fit right into any Jeep Wrangler TJ or LJ (1997-2006) with the rear...

    $1,699.99 - $2,049.99
    Choose Options
  • Sale
    5 Pin TJ / LJ Flasher Unit

    GenRight

    5 Pin TJ / LJ '01+ Flasher Unit

    This is a modified 5 pin electronic flasher unit to make the turn signals "flash" with LED lights. This flasher is specifically designed to work in all 2001 - 2006 Jeep Wrangler TJ & LJ's.Please order when using our: LED-1100,...

    $34.99
    Add to Cart
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

    This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were...

    $179.99 - $189.99
    Choose Options
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
    Add to Cart
36 of 318 Items

© 2023 GenRight Offroad All rights reserved. | Sitemap