This is the NEW Corner Guard set with RECESS for Matrix LED tail lights for the 4 door Jeep Wrangler JK (2007 - 2018) from GenRight Off Road.
These are a direct fit and a perfect upgrade to better protect your Jeep’s tub.
This is the perfect way to customize and upgrade your Jeep and "Armor Up" their rig or cover previous damage.
Don't be fooled by cheap imitations, compare and you'll see that GenRight has added lots of extra detail - remember "you get what you pay for!"
FEATURES:
- Recessed tail light pockets into each corner for the recessed LED tail lights (fits GenRight Matrix LED only).
- Full side and rear corner protection for the 4 door JK.
- These corner guards are contoured to fit the shape of the Jeep's tub.
- Includes a top "lip" formed into the metal for additional strength.
- We use tough 1/8" thick cold rolled steel plate.
- The formed shape is stronger than other brand flat metal panels.
- Stock wheel opening "shape" is retained (same) to still fit the factory wheel opening and can be cut to make bigger tires fit.
- Can be used with any brand aftermarket tube flares or the factory plastic flares.
- Fits over the stock plastic filler bezel and around the rear door hinges (as pictured).
- The mounting holes are pre-drilled to make mounting easier.
- Includes new stainless steel hardware to securely mount our corners to protect your Jeeps tub and look clean!
- 100% Made in U.S.A.
NOTES:
- The stock license plate mounting holes have been REMOVED from the drivers side rear panel. Because the stock location is too vulnerable.
- We recommend using our license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire (LED-1650).
- This product requires drilling of the body/tub and installing RivNuts to properly mount them.
- We designed these corners to fit the our (optional) flush mounted LED tail lights Matrix (GR-LED-TAIL)
- Wheel openings (on corner guard and body) can be trimmed to fit bigger tires.
- MIG welds around the recessed tail light cups can be ground smooth by the installer if you want that look.
- These Corners are sold un-painted and should be fully fitted (then removed) before painting or powder coating.
- Sold in pairs.
- Approximately 14lbs each.
- Typical install time is 4 hours total.
- We do offer a lower cost version of this corner guard that can accept a standard 4-1/2" LED truck tail light.
Please click on any picture to see larger more detailed images.
More questions? Please call 805-584-8635 to speak to one of our Jeep specialists.
