Made in the USA Since 2006

TJ/YJ/CJ-7 Corner Guard Blanks - Aluminum

4 reviews Write a Review
  • Corner Guard Backing Plates for any GenRight Corners

This is the GenRight Off Road "Full" side coverage Corner Guard Aluminum BLANKS (pair) for the Jeep TJ, YJ or CJ.

This is perfect for the guy who wants to cut all his own holes, wheel openings, etc. to have the most unique looking Jeep or match a unique combination of parts on a given Jeep.

There are NO CUT OUTS on these corners. The tail gate hinges (if you use them) would bolt on top of the 3/16” corner guards. Mounting the tail lights & gas filler on this version, is all up to you.

This model is an ideal choice when stretching your rear axle back or running monster tires, so you can trim the wheel opening to match you specific rig.


  • Laser cut from 3/16" thick lightweight 6061-T6 Aluminum alloy.
  • No hinge cut outs.
  • No tail light holes.
  • No gas filler opening.
  • The 90 degree bend is formed with a single "hit" die on a CNC press brake to assure this product matches the shape of your Jeeps tub.
  • Mounting holes are pre-drilled and countersunk (we use 2 more mounting bolts than other brands) to secure the corner to the tub.
  • Includes large 5/16" size countersunk Stainless Steel bolts (flush type) to securely mount our corners to protect your Jeeps tub and look clean!
  • Fits on top of most 6” tall after market 3/16” thick Rocker Guards (rock sliders).
  • Includes (2) 3/16" thick tail gate hinge spacers (for the door side to go under the hinges on a TJ & YJ).


  • Sold unfinished and requires the use of finishing tools such as a Scotch Brite pad and DA Sander to remove surface scratches.  Also, install will require drilling and cutting of your Jeep to mount this product.
  • The over all length and shape of this corner is the same. So if you are using a TJ, YJ or CJ-7 tub this product will work perfectly.
  • Can be trimmed and shaped to match body shape & fit a CJ-5, by the installer.
  • We recommend running our longer Stretch Rocker Guards (RCG-5002 or RCG-5003) to best match where the new wheel opening will most likely be. Stretch Mini boat sides Rockers are also available.
  • We recommend using our license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire (LPM-4006).
  • This product requires drilling of the body/tub and some cutting of the factory sheet metal to properly mount them.
  • We offer a bolt-on (no cutting) LED tail light upgrade as an option.
  • These Corners are sold un-painted and should be fully fitted (then removed) for painting.
  • Recessed or "Flush" type LED tail lights (LED1100) can be installed by cutting a 4-5/8” diameter hole.
  • Sold in pairs.
  • The weight of the un-cut panel is a little heavier at approximately 40lbs each.
  • Typical install time is 6 hours total.

4 Reviews

  • 5
    Great “full custom” option!

    Posted by Justin Coulter on Apr 15th 2020

    If you have a non-standard rear stretch, there is nothing better on the market. I wasn’t a big fan of the comp-cut look and wanted to cut my own wheel opening to maintain a rounded wheel opening with 11” of rear stretch on my TJ. Not to mention the fact that they are aluminum and will never rust! Highly recommend!

  • 5
    Works Great for Early CJ's - CJ3A and M-38

    Posted by Tim R. on Apr 11th 2020

    I contacted GenRight to ask if the radius on the corners would fit my 51 M-38 body. They told me the radius was about the same as a Folgers 3 pound coffee lid. I ordered a set of aluminum blanks and cut them to fit my fender opening which I had stretched for 37's. I made some rock sliders out of 1/4 inch thick, two inch angle iron that I shaped to follow the body lines. I cut a piece of the aluminum I removed from the fender opening and added about three inches to the bottom in front of the wheel well. It fit perfect. They look great and are great quality. The folks at GenRight are great to work with.

  • 5
    Customization you need.

    Posted by Unknown on Oct 4th 2018

    Allowed me to cut my wheel well where I wanted it and form it to MY jeep! Easy install, holes lined up with my old GR armor when I was stock.

  • 5
    Perfect for doing your own build

    Posted by Jeff on Nov 15th 2017

    These are awesome. Buy them blank then cut them as needed. I cut them perfectly to fit my 6 inch rear stretch and 40" tires. Another nice thing is they are the only brand I have ever worked with that fit PERFECTLY right when I got them, saves a lot of time! Not to mention the weight you save by going aluminum. Also another huge plus is they will never rust.