null

MADE IN THE USA

Questions? CALL US 805-584-8635

The best of the best when it comes to durability, reliability, and performance.

These are the products that we have Trail Tested & Race Proven for over 10 years.

 

  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $299.99
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $299.99
  • GenRight's Differential Skid Plate Guard for the Currie Rock Jock Rock Jock 60 & 70 Differential Skid Plate Guard Installed here on our Terremoto Jeep JK front axle, it keeps the bolts protected Shown here on our Jeep rear axle, it keeps the Jock Strap skid from getting ripped off We have used this Guard to protect the leading edge & bolts on our Rock Jock for years!

    GenRight

    Chin Strap for Currie 60 or 70 Diff Skid Plates

    Have you ever ripped off the bolts that hold the diff skid on your Rock Jock axle? Well after going through the trouble to dig out the busted off bolt you will want this! This is our "Chin Strap". It is a Guard GenRight developed from racing at KOH...

    $49.99
  • King Shocks 2.0" Air Bump (Qty of 4) - JK Elite

    King Shocks

    King Shocks 2.0" Air Bump (Qty of 4) - JK Elite

      Pair of (4) 2" King Shocks Air Bump Stops for Jeep JK Elite SuspensionFeatures: Precision ground Hard Chrome shafts. Each bump has a precision honed body. Durable Teflon bump on the end. Includes King Shock trademark, Blue...

    $1,519.96
  • Jam Nuts (Various Sizes), sold each Jam Nut shown here on a control arm with a Johnny Joint Jam nut shown here on steering tie rod and drag link with Heims Jam nut shown here on a sway bar link to lock a heim in place

    GenRight

    Jam Nuts (Each) Multiple Sizes

    Jam Nuts (aka: thin lock hunts) are used to lock (or jam) the threads of a Heim and Johnny Joint in place on sway bar, steering, trac bar or control arms.  They are available in the following sizes: 1/2-20 thread (sway...

    $3.99 - $7.99
  • Threaded Step Bungs (Each) - Multiple Sizes 7/8-14 Weld in bung on a 1-3/8" x .188" wall tubing for steering tie rod and/or drag link. 1-1/4-12 Weld in bung on a 1-3/4" x .120" or 2" x .250" wall tubing) for a control arm with a flex joint or heim. 1/2-20 Weld in bung on the end of (1" x .120" wall tubing) for a sway bar link.

    GenRight

    Threaded Step Race Bungs (Each) - Multiple Sizes

    These are top quality DIY weld-in "Tube Inserts" or "Bungs" (aka; threaded insert). They are CNC machined from cold rolled (1020) steel can be MIG or TIG welded into the end of your Steering, Sway Bar, Trac Bar or Control Arm tubing. The hex head on...

    $9.99 - $21.98
  • GenRight Die Cut Vinyl Windshield Decal Colors available: White, Grey, Red, Orange, Green, Yellow, Purple, Pink, Blue Red/White/Blue The same decal Tony runs on the windshield of the Terremoto JK

    GenRight

    GenRight Die Cut Vinyl Windshield Decal

    This is a great way to represent GenRight Off Road, your favorite American Made Jeep company! This is the same windshield sticker that Tony and the rest of the GenRight crew run on their Jeeps. FEATURES: Cut from premium 3M vinyl this is a 10...

    $14.99 - $19.99
  • Jeep JK Aluminum Dash & Center Console Kit This is the dash layout in our Terremoto Jeep JK Here is the dash being install with the A-pillar upgrade (GRC-8005). Here is how ergonomic the shifters are laid out Jeep JK Aluminum Dash & Center Console Kit Close-Up

    GenRight

    Jeep JK Aluminum Dash & Center Console Kit

    This is the GenRight Off Road Aluminum Dash & Center Console Kit  for the Jeep Wrangler JK and JKU. Main feature is lighter weight and 3" lower than stock dash for more visibility. It is fully customize-able to suit whatever interior...

    $1,999.99
  • 4 Door JK Aluminum Roof for GenRight Roll Cages Rear view of the GenRight 4 Door JK Aluminum Roof w/aftermarket graphic Underside of the aluminum roof on the GenRight cage.

    GenRight

    JK (4 Door) Aluminum Roof for V1 GenRight Roll Cage

      This is the new aluminum roof for the GenRight 4 door JKU Roll Cage (GRC-8001)! It is constructed from 1/8" thick 6061-T6 Aluminum (same thing we use on our Ultra4 car). It fits tight to the top of the cage and provides additional protection in...

    $799.99
  • 2 Door JK Aluminum Roof for GenRight Roll Cages 2 Door JK Aluminum Roof Underside 2 Door JK Aluminum Roof Rear View 2 Door JK Aluminum Roof Front View

    GenRight

    JK (2 Door) Aluminum Roof for GenRight Roll Cage

      This is the new aluminum roof for the GenRight roll cage! It is constructed from 1/8" thick 6061-T6 Aluminum (same thing we use on our Ultra4 car). This provides additional protection in the event of a roll over, to keep harmful objects (rocks,...

    $799.99
  • LJ Aluminum Roof for GenRight Roll Cages LJ Aluminum Roof Underside LJ Aluminum Roof Rear View LJ Aluminum Roof Front View

    GenRight

    LJ Aluminum Roof for GenRight Roll Cages

    This is the new aluminum roof for the GenRight roll cage! It is constructed from 1/8" thick 6061-T6 Aluminum (same thing we use on our Ultra4 car). This provides additional protection in the event of a roll over, to keep harmful objects (rocks, etc.)...

    $799.99
  • TJ/YJ/CJ-7 Aluminum Roof for GenRight Roll Cages This customer painted his to match on his Jeep Underside of the GenRight Aluminum Roof for a TJ, YJ, CJ-7 Front View of the GenRight aluminum roof on a customers CJ-7

    GenRight

    TJ/YJ/CJ-7 Aluminum Roof for GenRight Roll Cages

    This is the aluminum roof for the GenRight TJ, YJ or CJ-7 roll cages! It fits tight to the top of the cage and provides additional protection in the event of a roll over, to keep harmful objects (rocks, etc.) from entering the passenger...

    $799.99
  • Torco SR-5R 5W-30 Racing Oil

    Torco

    Torco SR-5R 5W-30 Synthetic Racing Oil

    Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5 utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

    $20.85
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $947.95
  • Torco 75W-140 synthetic gear lube

    Torco

    Torco SGO 75W-140 Synthetic Gear Oil

      We run Torco Synthetics because they are the best! It's what we use in every GenRight built Jeep and Ultra4 race vehicle! SGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed...

    $24.99
  • Torco SR-5R 20W-50 synthetic oil

    Torco

    Torco SR-5R 20W-50 Synthetic Racing Oil

      Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5R utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered...

    $22.75
  • Torco ATF fluid, full synthetic, Hi Vis

    Torco

    Torco ATF HiVis Automatic Transmission Oil

      HiVis ATF is specially engineered for severe operating conditions encountered in racing, high performance Street and off road use. HiVis is  formulated using 100% synthetic base oils and additive technologies designed to manage extreme...

    $21.99
  • Raceline Monster Beadlock Wheel, 17 x 9 Raceline Monster Beadlock Wheel, 17 x 9

    Raceline

    Raceline Monster Beadlock Wheel, 17 x 9

      This a LIMITED TIME INTERNET OFFER ONLY for wheels we have in stock, while supplies last!Raceline Monster "Diamond" machined aluminum finish beadlock wheels. This lightweight aluminum wheel is designed to keep the tire on the rim at low...

    $589.99
    $569.99
  • Raceline Monster Beadlock Wheel 17 x 8 Raceline Monster Beadlock Wheel 17 x 8

    Raceline

    Raceline Monster Beadlock Wheel 17 x 8

      This a LIMITED TIME INTERNET OFFER ONLY for wheels we have in stock, while supplies last!Raceline Monster "Diamond" machined aluminum finish beadlock wheels. These wheels have the D cutouts powder coated black, with the inside black as well...

    $589.99
    $569.99
  • Sale
    Raceline Avenger Beadlock Wheel, 17 x 8 Raceline Avenger Beadlock Wheel, 17 x 8

    Raceline

    Raceline Avenger Beadlock Wheel, 17 x 8

    This a LIMITED TIME INTERNET OFFER ONLY for wheels we have in stock AND while supplies last!This is the NEW Raceline AVENGER machined aluminum beadlock wheel with a unique look.This lightweight cast aluminum wheel is designed to keep the tire on...

    $479.99
    Was: $479.99
    Now: $429.99
  • Sale
    PRP 5.3 Harness in Black

    PRP

    PRP 5.3 Harness, Black

      This is the PRP black on black 5.3 point harness! This is a 3" wide strap 5 point harness with sewn in shoulder pads that stop chaffing on the neck and adds extra comfort, especially on long rides off-road. Includes all black hardware for...

    Was: $159.99
    Now: $149.99
  • Sale
    King Shock Nitrogen Gauge

    King Shocks

    King Shocks Nitrogen Gauge

    Now you can accurately adjust the nitrogen in your shocks like a pro! The trick is that there is so little "air" volume in a shock that it requires a special tool like this to do it and maintain the pressure you "think" you put in. This easy to use...

    $119.99
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
  • GenRight's JK Elite Coilover Suspension System Unmatched Articulation and Functionality Double Triangulated 4-Link Rear suspension Bind free 3-Link Front suspension Currie Front Axle with GenRight Hi-Steering

    GenRight

    JKU Elite Coilover Suspension System for 4 Door

    Been thinking about a coil over conversion for your Jeep Wrangler JKU? This is the GenRight Off Road ELITE Coil Over Long Arm & Long Travel Suspension "System" for the Jeep Wrangler JK 4 door (fits 2007 to 2018). This is The BEST Suspension you...

    $10,656.53
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
  • Sale
    RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
  • Griffin 12" x 12" universal fluid cooler Installed as Transmission cooler for GenRight Terremoto JK

    Griffin

    Griffin Universal Fluid Cooler, Small

      This is the newest style Heavy Duty "small" Griffin Aluminum Universal Fluid Cooler for use as a transmission or oil cooler.FEATURES: Compact 12.5" x 12.1" x 6.5" thick (including the cooler w/fan) size! Rugged...

    $413.00
  • Griffin 19.75 x 13" universal fluid cooler We use this larger cooler on the front of our 4500 car for cooling our transmission.

    Griffin

    Griffin Universal Fluid Cooler, Large

      This is the Heavy Duty "large" Griffin Aluminum Universal Fluid Cooler. Can be used for engine oil, transmission fluid or power steering fluid cooling.FEATURES: Overall size is 19.75" x 13" x 6.5" thick (includes cooler and fan). Actual...

    $557.00
  • FOX 2.0" air bump stop FOX 2.0" bump stop on the front of the GenRight Terremoto JK FOX 2.0" bump stop on the rear of the GenRight Terremoto JK FOX bump in a pinch style can

    Fox

    FOX 2.0 Air Bump, each

      This is the FOX 2.0" diameter Air Bump (aka: hydraulic bump stop). It has a 3" stroke and is tunable & rebuildable. Used by most of the competition vehicles for it's performance characteristics, it is perfect for additional suspension...

    $409.95
  • Sale
    JMXL16T Super Heavy Duty 1-1/4" -12 FK Rod End

    FK Rod Ends

    1-1/4"-12 FK Heim Rod End (Choose Thread)

    This is a genuine FK Heim, it is the only thing we will use on our Jeeps and off-road racers. These are American Made and fully CrMo (aircraft grade) 1-1/4" shank with 12TPI and 1" bore (through the ball). The amount of rotation in...

    $89.99