null

MADE IN THE USA

phone: (805) 584-8635

Drivetrain

36 of 37 Items
  • Currie Enterprises Rock Jock 70 Rear Axle Currie Enterprises Rock Jock 70 Rear Axles in stock Currie Rock Jock 70 Rear Axle in the GenRight Terremoto JK The Currie Rock Jock 70 being put to the test on Pritchett Canyon in Moab, UT. We run the Currie Rock Jock 70 in our 800HP Unlimited Class off-road race car

    Currie Ent

    Currie 70 Full Float Jeep Rear Axle - Complete

    This is the Currie Extreme 70 complete REAR Axle. This is the same axle we run in our 800HP Ultra4 racer, 640HP Terremoto Jeep Wrangler JK and Bowtie Jeep TJ since 2014! This is a complete Full Float, 40 spline rear axle with NO mounting brackets...

    $10,599.99
    Choose Options
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
    Choose Options
  • Complete Currie RockJock 44 Front Axle with brackets and tabs Complete Currie RockJock 44 Crate Front Axle Shown here with Black Currie diff cover, Reid knuckles and hi-steering Compare the stock JK 44 to the Currie RJ 44 Center section Compare the stock JK Dana 44 to the Currie RockJock 44 Center section

    Currie Ent

    Currie JK 44 Front Crate Axle - Complete

      The Currie 44 complete axle is a direct bolt-in solution for the Jeep Wrangler JK 2007 - 2018 off road jeep wranglers. The cost is reduced by retaining the stock outer knuckle assemblies (brakes, hubs etc.) and stock wheel bolt pattern (5...

    $6,399.99
    Add to Cart
  • Alcon Big Brake kit for the front of a Jeep JK You can see the quality of the Alcon 4 piston caliper /rotor installed on Currie Rock Jock front axle The Alcon brakes are so big they barely fit inside a 17" wheel The GenRight tech installing the Alcon brakes on a Jeep Alcon vs Stock front brakes

    Alcon

    Jeep Alcon Big Brake Kit, Front (Rock Jock)

    This is the real deal! If you are looking for the ultimate stopping power without changing the brake master cylinder, then check out the Performance Big Brake Package from Alcon for the FRONT of an off road Jeep with a Rock Jock axle (with 5 on 5-1/2...

    $2,830.34
    Add to Cart
  • Alcon Big Brake kit for the front of a Jeep JK Close up of the Alcon mounted on a Currie Rock Jock rear axle. Alcon is so big, it barely fits inside a 17" wheel Alcon vs Stock rear brakes The GenRight tech installing the Alcon brakes

    Alcon

    Alcon Big Brake Kit, Rear (Rock Jock)

    This is the Performance Big Brake Package from Alcon for the REAR of an off road Jeep Wrangler with a Currie Rock Jock axle. • Gains in performance over stock braking system: - Up to 30% reduction in disc temperature rise- Up to 26% reduction in...

    $2,731.48
    Add to Cart
  • Alcon Big Brake kit for the front of a Jeep JK, BKF5459AX02

    Alcon

    Alcon Jeep JK Big Brake Kit, Front

    This is the Big Brake Package from Alcon for the FRONT of a Jeep Wrangler JK, 2007-2017 (2 or 4 door). • Gains in performance over stock braking system: - Up to 30% reduction in disc temperature rise- Up to 26% reduction in pad work rate- Up...

    $2,274.16
    Add to Cart
  • Alcon Big Brake kit for the front of a Jeep JK, BKR5059D12

    Alcon

    Alcon Jeep JK Big Brake Kit, Rear

    This is the Big Brake Package from Alcon for the REAR of a Jeep Wrangler JK, 2007-2017 (2 or 4 door). • Gains in performance over stock braking system: - Up to 30% reduction in disc temperature rise- Up to 26% reduction in pad work rate- Up...

    $2,175.29
    Add to Cart
  • Sale
    JE Reel driveshaft upgrade for the 4 door Jeep JK

    JE Reel

    JK Drive Shaft Upgrade Kit, 4 Door

    This is the JE Reel Driveshaft UPGRADE for the 4 door Jeep Wrangler JK (2007 - 2017). If your JK is lifted more than 2" you should replace the factory "junk" CV driveshafts. They are a rubber booted CV style driveshaft and with the increased driveline...

    $1,499.99
  • RCV Axle Shafts for the Jeep JK Rubicon 44 GenRight JK build with GenRight Hi-steer and Elite suspension on Dana 44 Shown here on a GenRight build with GenRight Hi-steer and Elite suspension

    RCV Performance

    RCV Ultimate Dana 44 CV Axle Set for Jeep JK Rubicon '07+

      RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak factory Dana 44 U-joint axle shafts with a high-strength constant velocity design. Tests prove Ultimate CV Axles to be twice as strong as OEM Jeep JK shafts, and they're just as...

    $1,449.99
    Add to Cart
  • Sale
    RCV Axle shafts for the Jeep JK Dana 30 front axle Shown here on a GenRight build with GenRight Hi-steer and Elite suspension GenRight JK build with GenRight Hi-steer and Elite suspension

    RCV Performance

    RCV Ultimate Dana 30 CV Axle Set for Jeep JK '07+

    RCV Performance Ultimate CV Axles simply replace your Jeep JK's weak Dana 30 U-joint axle shafts with a high-strength constant velocity design. Tests prove Ultimate CV Axles to be twice as strong as OEM Jeep JK shafts, and they're just as tough at a...

    $1,349.99
    Add to Cart
  • Sale
    TBM Brake Upgrade for the JK Front Axle (Dana 30 or 44). Factory piston on left and TBM nickle plated on right Heat and chemical treated rotors and surfaced for the best braking and wear. Special performance TBM brake pads

    GenRight

    TBM Thunderstorm JK Brake Kit, Front

      The Brakeman (TBM) Thunderstorm Front Brake Package for the Jeep JK, 2007-2017 (2 or 4 door). GenRight is now stocking the TBM Thunderstorm Brake Packages for your Jeep. This package includes a "works" style JK caliper, chemically...

    $1,299.99
    Add to Cart
  • Griffin Aluminum Radiator for the Jeep JK

    Griffin

    Griffin Aluminum Radiator w/Fan, Jeep JK

    This is the top of the line Griffin All Aluminum radiator which is a direct fit for the Jeep Wrangler JK (2007-2017). This is part of Griffin's new MaxCool package where they take out all the guess work and provide you everything you need to...

    $1,235.00
    Add to Cart
  • GenRight's LS Engine and 4L80 Transmission Mounting kit for the Jeep JK Engine mounting kit for the Jeep JK includes fixture pieces to space engine mounts properly 100% designed in CAD to fit the Chevy LS engine and JK Frame with Elite Suspension This is where it mounts on the back of front cross member How the 4L80 Trans mount assembly looks

    GenRight

    JK Elite LS Engine and 4L80 Transmission Mounts

    This is the GenRight LS Engine and 4L80 Transmission Mounts for the GenRight Off Road JK Elite Suspension. These are the same designed parts we use on the GenRight Terremoto Jeep Wrangler JKU as part of the GenRight Elite Suspension System. Perfected...

    $799.99
    Add to Cart
  • Currie 1 Ton unit bearing with 1/2" wheel studs. Same unit we use on Currie front axles.

    Currie Ent

    Currie Front Unit Bearing Hub, 1/2" Studs

    This is the Currie Heavy Duty 1 Ton Unit Bearing. 5 on 5.5 Bolt Pattern. 1/2" Diameter Studs. This is the same hub we run on all our Currie Axles. Features: Easy to replace. Ford Style 1 ton Unit Bearing. 35 Splines. Accepts a locking...

    $504.99
    Add to Cart
  • Currie 1 Ton unit bearing with 5/8" wheel studs. Same unit we use on Currie front axles.

    Currie Ent

    Currie Front Unit Bearing Hub, 5/8" Studs

    This is the Currie Heavy Duty 1 Ton Unit Bearing. 5 on 5.5 Bolt Pattern. 5/8" Diameter Studs. This is the same hub we run on all our Currie Axles. Features: Easy to replace. Ford Style 1 ton Unit Bearing. 35 Splines. Accepts a locking...

    $504.99
    Add to Cart
  • GenRight's mounting kit for the custom Griffin Radiator JK V8 radiator Shown here mounted in the GenRight Terremoto Jeep JK Shown here mounted in the GenRight Terremoto Jeep JK with LS Shown here stuffed into the factory core support (must be modified)

    GenRight

    JK Elite Aluminum Radiator Mounts for LS Engine

    This is a custom designed mount (like the one we are running in the Terremoto Jeep JK) to hold the GenRight spec Griffin Aluminum radiator. We take out all the guess work and provide you everything you need to swap over to a super efficient aluminum...

    $429.99
    Add to Cart
  • Wrangler JK RockJock® Currectlync® Tie Rod Compared to Factory Tie Rod (On Right) Wrangler JK RockJock® Currectlync® Tie Rod Steering Stabilizer Hardware Steering Stabilizer Hardware (Assembly)

    RockJock

    Wrangler JK RockJock® Currectlync® Tie Rod

      This is the RockJock® Currectlync® tie rod for the Jeep JK Wrangler's steering. Fits all models of Jeep JK 2007 - 2017. Features 1-1/2" diameter tube construction. Forged tie rod ends and premium jam nuts & adjuster. A heavy duty...

    $423.00
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • R1Concepts Carbon Geomet Series OEM Brake Rotors R1 Performance offers 3 different types of rotors! R1 Performance rotors and pads being installed on the front of the GenRight Grey Wolf JK

    R1 Concepts

    R1 Carbon Geomet Series Jeep JK OEM Brake Rotors

    This is the R1 Carbon Geomet Series rotors (you choose Front or Rear). These will provide the ultimate stopping power needed for demanding driving and harsh conditions. They are made with more Carbon, Chromium, and Molybdenum (good stuff!), which...

    $149.99
    Choose Options
  • Sale
    TBM performance Rotors for the Jeep JK 5 on 5 bolt pattern

    GenRight

    Jeep JK Brakeman Front Rotor 2007-2017

    Jeep JK Brakeman Front Rotor 2007-2017 GenRight stocks these cast Hi-Performance Rotors for your Jeep JK. These rotors are "State of the ART" and we are sure you will be pleased with them. SuperBrakes™ from The Brake Man for virtually any...

    $141.99
    Add to Cart
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • GenRight's Needle Bearing Roller to protect your Tie Rod Needle Bearing Roller for your Tie Rod Installed on the front diff cover, prevents the tie rod from getting bent

    GenRight

    Needle Bearing Roller for Tie Rod

    Have you ever bent your tie rod? Well that is because it's so long and only supported on either end. This is a Roller Bearing which is mounted on the front diff cover and effectively shortens the length of the tie rod. Thereby supporting the tie rod...

    $99.99
    Add to Cart
  • Sale
    TBM Performance brake pads for the Jeep JK TBM Performance brake pads for the Jeep JK

    GenRight

    Jeep JK Brakeman Front Brake Pads 2007-2017

    Jeep JK Brakeman Front Brake Pads 2007-2012 GenRight is stocks these TBM Brake Pads for your Jeep. These brake pads  are "State of the ART" and we are sure you will be pleased with them. SuperBrakes™ from The Brake Man for virtually any...

    $84.99
    Add to Cart
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • R1 OEp FRONT brake pad set for the Jeep JK New R1 Performance pads installed in Jeep JK front caliper New R1 Performance pads out of the box How the R1 OEp FRONT brake pads are constructed How the pad compound fits within R1's offering

    R1 Concepts

    R1 Performance FRONT Brake Pads for Jeep JK

    This is the Optimum OE (factoy Jeep calipers) FRONT brake pads from R1 Concepts. This is the same pad compound we used on the GenRight Grey Wolf JK in the video install. Advanced cars require advanced brake pads. Though other brake pads may be...

    $42.99
    Add to Cart
  • R1 OEp REAR brake pads for the Jeep JK New R1 Performance pads installed in Jeep JK rear caliper New R1 Performance pads out of the box Here you can see how the R1 OEP front brake pads compound sits in the pads they offer R1 OEP grade brake pads for the Jeep JK

    R1 Concepts

    R1 Performance REAR Brake Pads for Jeep JK

    This is the Optimum OE (factory Jeep rear calipers) REAR brake pads from R1 Concepts. This is the same pad compound we used on the GenRight Grey Wolf JK in the video install. Advanced cars require advanced brake pads. Though other brake pads may...

    $23.99
    Add to Cart
  • Torco Synthetic 85W-140 gear lube

    Torco

    Torco RGO 85W-140 Synthetic Gear Oil

    We run Torco Synthetics because they are the best! RGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. It is formulated using a combination of Group IV/V...

    $14.25
    Add to Cart
  • Torco HPG 75W-140 synthetic gear lube

    Torco

    Torco HPG 75W-140 Synthetic Gear Oil

    HPG is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load conditions. Recommended for use in stock or re-geared Jeep differentials. Used in all forms of off-road &...

    $13.95
    Add to Cart
36 of 37 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap