null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

D.I.Y. & UNIVERSAL

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

108 of 130 Items
  • Here you can see the slight bends in the 1/4" thick wall CrMo tubing Jeep JK Frame Side Trac Bar from the GenRight Elite 3 Link Suspension kit 1/4" thick frame side mount fits the frame perfectly Shown here how it fits over the steering box frame sleeves. Double shear 9/16" Grade 8 Bolt

    GenRight

    JK Elite Frame Side Trac Bar Mount (2 or 4 Door)

     This is a Heavy Duty Frame Side Front Trac Bar Mount for the Jeep Wrangler JK, from GenRight Off Road.. It is part of our long travel GenRight Elite Coil Over Suspension System. These are the same parts included in our front 3 link kit and the...

    $124.99
    Add to Cart
  • Universal Removable Harness Bar w/ 2 bolt Flat Flange Option (OEM or GR) This is how you fit the GenRight harness bar to the stock roll bar. Place the harness bar tube and 2 bolt flange on stock cage and drill holes for weld-in bungs. This is how 2 bolt flange fits on tube, once cut to length. The green bar behind the front seats on the B-pillar is this bar kit. 2 bolt flat flange style.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourselfer to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Harness Bar Kit that will allow you to put it in for the big wheeling trips and/or remove it for everyday life around town. The...

    $119.99 - $199.99
    Choose Options
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Elite Axle Side Trac Bar Mount (2 or 4 Door JK)

    This is a Heavy Duty GenRight axle side Trac Bar mount from the Elite Suspension system or the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) or Dynatrac front axles. It keeps the front axle under...

    $99.99
    Choose Options
  • GR Round LED Lights Rear view of GR LED Round Lights

    GenRight

    GenRight LED Back Up / Rock Lights

    This is the all new SUPER bright LED light from GenRight Off Road. Fits into our existing laser cut holes in most of our bumpers, or you can drill your own and attach it with the threaded nut on the back side. Can be used as Rock Lights or Back Up...

    $99.99
    Add to Cart
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
    Add to Cart
  • Small Cargo Tray Mounting kit, includes hardware. Tube clamps mount here. Formed Clamps mount here. ACC-1200 was CAD Designed for exact fitment into GR Tire Carrier. Another view of how the clamps work on the GR tire carrier.

    GenRight

    Small Cargo Tray Tire Carrier Mounts

    These mounts allow you to mount our small cargo carrier inside your GenRight Swing Out Rear Tire Carrier A very convenient solution to store gas cans, firewood, and other camping essentials. All mounting hardware is included.  

    $99.99
    Add to Cart
  • GenRight's license plate mounting plate for the center of the rear door on a TJ or LJ. TSK-2020 shown here with a license plate on it. Shown here on Andrew's LJ with optional LED-1650 license plate and 3rd brake light. Shown here on the Maxmoto Jeep LJ. Shown here on Jeep Wrangler YJ.

    GenRight

    Tailgate License Plate Mounting Plate

    This is the Tailgate License Plate mounting plate for the Jeep Wrangler (YJ, TJ & LJ) from GenRight Off Road. It simply covers the factory vent and relocates the rear license plate to the center of the rear door on a Jeep Wrangler. It is...

    $99.99
    Choose Options
  • GenRight Cargo Rack Mounts for Jeep JL Tailgate Shown here on the Jeep tailgate with optional small GR cargo rack/carrier. Each mount slides in from the side

    GenRight

    Tailgate Mounts for JL Small Cargo Carrier

    Not running a spare tire and want more space to carry cargo? These GenRight Mounts are for the tailgate on a Jeep Wrangler JL to mount the Small GenRight Cargo Carrier for your Jeep Wrangler. It allows you to carry cargo that you simply don't want...

    $99.99
    Add to Cart
  • GenRight Cargo Rack Mounts for Jeep JK Tailgate Shown here in black on the Jeep JK tailgate with optional small GR cargo rack/carrier. Shown here on the Jeep tailgate with optional small GR cargo rack/carrier. Each mount slides in from the side

    GenRight

    Tailgate Mounts for Small Cargo Carrier for Jeep JK

    Not running a spare tire? These are Mounts for the tailgate on a Jeep Wrangler JK to mount the Small GenRight Cargo Carrier for your Jeep Wrangler. It allows you to carry cargo that you simply don't want inside your Jeep. NEW - Movable Cargo Hooks!...

    $99.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight aluminum foot rest Foot rest parts GenRight's aluminum foot rest Aluminum foot rest Aluminum foot rest for passenger

    GenRight

    Universal Aluminum Foot Rest

    This is the GenRight Off Road aluminum foot rest. These are great for a passenger to push themselves back in the seat in rough terrain. It is universal and can be used in any off-road vehicle where the passenger wants a foot rest...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
    Add to Cart
  • GenRight's Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit, shown here with tube support. Jeep YJ Trac Bar Mount (Frame Side) Kit, shown here with optional side gussets.

    GenRight

    Jeep YJ/CJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit specifically designed for the Jeep Wrangler YJ & CJ. This is the same design we have reliably run on our GenRight Jeeps for years!Front Trac Bar Bracket Kit...

    $89.99
    Add to Cart
  • Long Fuel Pump Extension Kit Extended pump module vs stock height. Comparison to factory rods (on right)

    GenRight

    Factory Fuel Pump Extension Kit - Deep

    This is our longest extension kit that allows you to use your factory Jeep fuel pump module in a deeper GenRight gas tank.   This is done by extending the module to reach down to the bottom of the higher capacity GenRight fuel tank...

    $79.99
    Add to Cart
  • License Plate Relocation Mount Telescoping mount is fully adjustable The base slides onto your tire carrier, under your wheel Here you can see the base with the wheel on Mount the license plate to the male piece

    GenRight

    Telescoping License Plate Relocation Mount

    This is a universal License plate mount that cleanly relocates your rear license plate from the rear corner of the Jeep to the center of the spare tire.FEATURES: Made of sturdy steel tubing Fits 5 on 4.5 (TJ / YJ / XJ), 5 on 5 (JK), 5 on 5.5...

    $79.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 for 3.5" diameter axle tubes Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for larger 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-2110 lower control arm 10 degree brackets for a 3.5" diameter axle tube. Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Made specifically to fit the larger 3.5" tube axles like a 14 Bolt or other aftermarket axle housings. Heavy Duty 1/4" thick is precision formed into shape so...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount for 3.5" tubes One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for the larger 3.5" diameter axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets for 3.5" tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically made for 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the...

    $69.99
    Add to Cart
  • Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube. (Jack not included) Full kit parts, mounts, velcro strap, and hardware (U-bolts optional) Scissor Jack mod kit (Jack not included) Scissor Jack mod kit, weld on or bolt on (Jack not included) Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube (Jack not included)

    GenRight

    HD Scissor Jack Mod/Mounting Kit

    This is the GenRight Off Road manufactured Scissor Jack Kit. Why the Scissor Jack? It has a better range (compressed & extended) over a bottle jack or floor jack.  Where this matters is if you are running big tires and get a flat, as you...

    $69.99
    Choose Options
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height or...

    $59.99
    Add to Cart
  • GenRight Mini Boatside Rocker Guard Extensions

    GenRight

    GenRight Mini Boatside Rocker Guard Extensions

    This is a 24" piece of material the same shape and thickness as our Mini Boat Side, 6" tall Rocker Guards. This DIY piece of metal can be cut and shaped by the installer and welded on to the existing rocker guards after stretching the wheelbase...

    $59.99
    Add to Cart
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GenRight Standard Rocker Guard Extensions

    GenRight

    GenRight Standard Rocker Guard Extensions

    This is a 24" piece of material the same "L" shape and thickness as our Standard 6" tall Rocker Guards. This DIY piece of metal can be cut and shaped by the installer and welded on to the existing rocker guards after stretching the wheelbase. Perfect...

    $49.99
    Add to Cart
108 of 130 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap