Jeep JL (4 Door) Full Roll Cage Kit

We use the latest Laser Cutting and CNC Tube Bending technology to "puzzle or key" the tubes in this kit together.

This cage is built from a combination of heavy duty 2" diameter DOM tubing and some 1-3/4" (on interior tubes) to allow more room in passenger compartment.

It features solid 8-point mounting to the Jeep for maximum protection (unlike any other cage on the market). 

This is the best most protective, complete replacement, weld-in (not bolt-on) cage available making it the safest cage on the market for a Jeep Wrangler JLU.

All the tubes are cut to length and notched to fit together like a "puzzle." You just need a (MIG or TIG) welder to put it all together.

Features:

• Made from 2" diameter heavy duty x .120" wall D.O.M. (Drawn Over Mandrel) seamless tubing.
• Laser Cut and notched CNC bent tubes, with additional keying for fool-proof assembly and a precision fit.
  
• Solid 8-point mounting for maximum safety by adding an additional pillar behind rear seats to protect passengers *PATENT PENDING
  
• Designed for maximum visibility with an ultra low profile bar over the top of the dash.
• Only minor trimming of plastic and visors, rearview mirror and B-pillar plastic can all be re-installed.
• Front door panels do not rub the sides of the dash after cage is installed (like other cage kits).
• Fits under both, factory Jeep hard and soft tops.
  
• Can be used with Factory Full metal doors (or half doors).
• Heavy duty cage to tub mounting brackets are laser cut and formed (some are pre-welded).
• Each tube has the part number laser etched into it, so there are no mistakes.
• 2 grab handles are included for the front (grab handles for the rear passengers are optional).
• Includes mounting brackets to retain all the factory seat belts.
• Includes all necessary mounting hardware (Grade 8)
• Includes very detailed step by step installation instructions (can be MIG welded together in as little as 2 days).
• 100% Made in U.S.A.!
• PATENT PENDING

Important Notes:

• This cage was designed to be used with all the optional (1-3/4" tube X-bar  and 1-1/4" dash V-bar).
• We strongly urge you to install these bars for the cage to provide it's best protection.
• This kit is sold un-welded, requiring welding by the end user in the vehicle.
• It is always best to build/weld the roll cage in the Jeep that it will be used in.
• Works with factory Jeep Adaptive Cruise Control too. It does require an extra optional bracket and trimming the plastic cover.
• You can use BOTH regular factory seat belts and/or 5-point harnesses (front and rear when all optional bars are installed).
• This kit requires complete removal of the stock roll bar (and most of the Jeep's interior for installation).
• After welding the cage, the cage can be removed for powder coating or painting.
• It is possible to re-fit most of the stock interior plastic (including the lighted sun visors), but it will take some work to trim the plastic nicely.
• Some trimming of the other interior plastic will be necessary, if you want to reinstall it.
• Adding a roll cage to a Jeep is not a guarantee of safety. However, this is a substantial upgrade from the factory cage!
• Do NOT leave any openings OR drill holes in any tubes (to run wires) as it compromises the integrity and strength of the tubing.
• Don't forget the extra protection of an aluminum roof (GRC-10200)!

Due to size limitations this product or products may have to ship via freight carrier.

In such cases, shipping prices represent estimates only and are subject to change based on delivery requirements.

You may be contacted by a GenRight representative to discuss shipping options and final charges.

More Questions? Call us at 805-584-8635 for an authorized installer near you!