null

MADE IN THE USA

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

  • 16307 Fuel Pump Wire Harness, heavy duty, Aeromotive

    Aeromotive

    Aeromotive Wire Harness to run Fuel Pump

      This is the heavy duty Aeromotive wire harness to run an aftermarket (high volume & high pressure) fuel pump. Are you considering to switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot...

    $164.95
  • Threaded Step Bungs (Each) - Multiple Sizes 7/8-14 Weld in bung on a 1-3/8" x .188" wall tubing for steering tie rod and/or drag link. 1-1/4-12 Weld in bung on a 1-3/4" x .120" or 2" x .250" wall tubing) for a control arm with a flex joint or heim. 1/2-20 Weld in bung on the end of (1" x .120" wall tubing) for a sway bar link.

    GenRight

    Threaded Step Race Bungs (Each) - Multiple Sizes

    These are top quality DIY weld-in "Tube Inserts" or "Bungs" (aka; threaded insert). They are CNC machined from cold rolled (1020) steel can be MIG or TIG welded into the end of your Steering, Sway Bar, Trac Bar or Control Arm tubing. The hex head on...

    $9.99 - $21.98
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
  • Aeromotive 340 Stealth in-tank pump kit contents Close up of Aeromotive 340 Stealth in-tank pump Aeromotive 340 Stealth in-tank pump application chart Aeromotive 340 Stealth in-tank pump spec sheet Aeromotive 340 Stealth in-tank pump drawing with dimensions

    Aeromotive

    Aeromotive 340 Stealth In-tank Fuel Pump w/sock

      This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340...

    $144.95
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $947.95
  •  Universal Spare Tire & Wheel Mount.  The urethane isolator holds a variety of wheel sizes. Here you can see how it clamps the wheel into place.

    GenRight

    Universal Spare Tire & Wheel Mount

    This is a top quality universal spare tire mounting assembly from GenRight Off Road. It has a heavy duty 1" ACME threaded rod and giant T-handle nut are perfect to hold a spare tire in an off-road vehicle. The mounting bracket has (6) 1/4-20 Grade 8...

    $349.99
  • Long Fuel Pump Extension Kit Extended pump module vs stock height. Comparison to factory rods (on right)

    GenRight

    Factory Fuel Pump Extension Kit - Deep

    This is our longest extension kit that allows you to use your factory Jeep fuel pump by extending the module to reach the bottom of the higher capacity GenRight fuel tank. FITS: GST-2100-2 (2005 & 2006). GST-8007-2 (2007 thru 2018)...

    $79.99
  •  Bluesea Below Deck 12V DC & USB Power Panel 12V DC & Dual 2.1A USB Chargers Built in 2A Fuse & 15A Circuit Breaker Dimensions

    Bluesea

    Bluesea Below Deck 12V DC & USB Power Panel

    This is a marine quality Universal 12V power panel for your Jeep Wrangler/Jeep Rubicon. FEATURES: The Blue Sea "Below Deck Panel" is a compact, easy to install DC charging center. The 12 Volt Cig Socket from Blue Sea Systems is designed to...

    $59.99
  • Trail Sac in Black attached to spare tire on a Jeep JK Trail Sac in Blue attached to tire carrier on a Jeep TJ Opening at the top makes it easy to stuff trash or other items into the bag Trail Sac in Grey Trail Sac in Red

    SpiderWeb Shade

    TrailSac by SpiderWeb Shade

    This is the TrailSac from SPIDERWEB SHADE. This is the same product we use in all our GenRight trail rigs! Fetaures: The mesh material will not trap moisture or sand. Available in all of our 4 different mesh colors. The Trail Sac is a must have...

    $39.99
  • Spiderweb Shade GrabBag GrabBag shown here in a Jeep Available in 12 colors!

    SpiderWeb Shade

    SpiderWeb Shade Jeep Grab Handle Bag

    This is the GrabBag from SPIDERWEB SHADE. FEATURES: The mesh material will not trap moisture or sand. Available in all of our 12 signature TrailMesh colors. The GrabBag is a must have for any Jeeper looking for easy-to-access storage in...

    $24.99
  • Spiderweb Shade for the GenRight Roll Cages The mesh provides shade while still allowing light to pass through

    SpiderWeb Shade

    SpiderWeb Shade for GenRight TJ, YJ & CJ Cages

    This is the Spiderweb Shade specifically sized to fit the GenRight TJ, YJ or CJ-7 Roll Cages.  This is a shade top that will not flap in the wind while driving (yes quiet)! This high quality top requires NO windshield header. The mesh...

    $119.99
  • CE-9110T Johnny Joint Tool for Rebuilds Tool shown here compressing the joint to remove the retainer clip Rock Jock Johnny Joint Sizing Chart

    RockJock

    Tool for Rebuilding 2.5" Johnny Joint

    RockJock's Johnny Joint Tool is designed to make assembly OR disassembly of our 2-1/2 in. Johnny Joint Rod Ends simple! For Johnny Joint rebuilds and repairs, this tool can be used either in a bench vise, or it is compact enough that it may also be...

    $150.00
  • Fuel Pump Access Panel for the Jeep LJ GenRight's fuel tank access plate is cut into the rear floor section of a Jeep LJ

    GenRight

    Fuel Pump Access Panel for the Jeep LJ

    This is the GenRight Off Road rear floor access plate for the wider floor ribs on the Jeep Wrangler Unlimited LJ (all models 2003 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without...

    $169.99
  • Warn 8274 Heavy Duty Winch Mount from GenRight Off Road Warn 8274 Heavy Duty Winch Mount on a GenRight Off Road front bumper Close up of the Warn 8274 Heavy Duty Winch Mount from GenRight Off Road

    GenRight

    GenRight Heavy Duty 8274 Winch Mount

    This is the Heavy Duty Front Bumper Mount for the 8274 Warn Winch from GenRight Off Road. This mount will fit most GenRight Jeep Wrangler CJ, Jeep YJ and Jeep TJ front bumpers (depending on bar and gusset configuration). FEATURES: Laser cut and...

    $149.99
  • GST4053 and GST2053 Frame Sleeves w/ Hardware Close up of the sleeve on forward gas tank mount Sleeve shown here on tank mount. Shown here where they would go thru the frame, on each side

    GenRight

    GST4053 and GST2053 Frame Sleeves

    This is the Frame Sleeve kit for the Jeep TJ or YJ. It necessary if bolting up a GenRight gas tank through the factory frame to keep from crushing the frame when tightening to two forward bolts on the skid plate. One sleeve and bolt is used per side...

    $9.99
  • GenRight Billet twisted pitman arm Heat Treated Chromoly provides incredible strength and durability. GenRight Billet twisted pitman arm Arm is twisted for optimal geometry GenRight Billet twisted pitman arm

    GenRight

    Billet Chromoly Twisted Pitman Arm

    This is the new and innovative GenRight Billet Twisted Pitman Arm that allows for 3.5" more up travel. This arm was designed as part of our new low ride height TRACER Suspension system for the Jeep LJ. It corrects the angle issues inherent in...

    $899.99
  • Universal Removable Harness Bar w/ 2 bolt Flat Flange Option (OEM or GR) This is how you fit the GenRight harness bar to the stock roll bar. Place the harness bar tube and 2 bolt flange on stock cage and drill holes for weld-in bungs. This is how 2 bolt flange fits on tube, once cut to length. The green bar behind the front seats on the B-pillar is this bar kit. 2 bolt flat flange style.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourselfer to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Harness Bar Kit that will allow you to put it in for the big wheeling trips and/or remove it for everyday life around town. The...

    $119.99 - $199.99