null

MADE IN THE USA

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

52 of 52 Items
  • GenRight Off Road's Stanchion kit for the '97 - 06 Jeep Wrangler TJ or LJ. Here you can see how the stanchion fits when installed. Here you can see the stanchions on a fully welded cage out of the vehicle.

    GenRight

    TJ / LJ Cage Stanchions

    PRICE REDUCTION! Building your own cage?Then the GenRight Stanchion or Leg at the dash for the Jeep TJ / LJ is for you. They are designed to fit tight to the dash and maximize leg room.It is laser cut from heavy 3/16" thick steel plate and CNC formed...

    $399.99
  • Mesh panel helps let heat out of engine compartment Hi Fenders and Hi Inner fenders, shown here on the GenRight Tuxedo LJ Jeep Wrangler TJ (or LJ) Hi-Fender Inner Fender Kit, aluminum TJ/LJ Hi-Fender Inner Fender Kit shown with GenRight hi-fenders with stock coil springs

    GenRight

    TJ/LJ Hi-Fender Inner Fender Kit

    This is the Hi-Fender Inner Fender Well Kit from GenRight Off Road, for a Jeep Wrangler TJ or LJ. Updated in 2022 with a mesh panel to vent heat from the engine compartment. By using these inner fenders, it eliminates the need to cut the stock...

    $349.99
  • TJ/LJ Standard Inner Fender Kit Shown here with standard height GenRight tube fenders and coil over shocks Shown here with standard height GenRight tube fenders and coil springs

    GenRight

    TJ/LJ Standard Inner Fender Kit

      This is the Inner Fender Well Kit from GenRight Off Road, for a Jeep TJ or LJ that eliminates the need to cut the stock fender at all! This is a REAL inner fender. It will fully enclose the area (unlike other aftermarket inner fenders)...

    $349.99
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

      This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire...

    $299.99
  • 1-3/4" tube X-Bar for the GenRight TJ, LJ, YJ and CJ cages. Get the extra cage strength by adding in an "X" bar to the cage. The X-bar tubes are bent back for seat clearance.

    GenRight

    Behind Seat "X" Bar Kit for TJ or LJ

    This is the GenRight Behind the seat "X" bar kit "option" for the GenRight TJ, and LJ Full roll cage kits.Kit includes 4 tubes that have been laser cut and mitered to fit the cage kit.It is made from heavy .120" thick wall 1-3/4" D.O.M...

    $299.99
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed in the Jeep!

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
  • GenRight windshield guards for the Jeep Wrangler TJ or LJ Here you can see they are fitted nicely to the windshield frame Fitted nicely to the windshield frame and clean! They go all the way up to the rubber seal at the top

    GenRight

    Windshield Guards for the Jeep TJ/LJ

      This is the GenRight Off Road windshield guards for all models of the the Jeep Wrangler TJ or LJ (1997 - 2006).This newest version goes up higher than previously and are the best fitting windshield guards on the market!These are a nice way to...

    $249.99
  • Optional C-pillar add on bar, ties the two C-pillars together Pictured here with optional tube couplers installed on each end to make it removable.

    GenRight

    Behind Seat Bar, C Pillar

    This is the GenRight behind the seat bar for any TJ, LJ, YJ or CJ GenRight cage C-Pillar. Additional tube adds strength to the rear section of the roll cage. Tony recommends on every cage.FEATURES: Cut to length (to fit GenRight FULL cage...

    $149.99
  • TJ/LJ C-Pillar Tie-In Builders Kit parts, hardware included, but not pictured. Looking up at the attachment point under the rear fender well. How it mounts to the top of the box at the rear most body mount.

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep TJ & LJ

    This is the GenRight Off Road kit to tie-in the C-Pillar of your Roll Cage down to the top of the rear body mount (directly above the frame mount) for added support and safety in the event of a roll over. This is the same kit we have on the...

    $149.99
  • RTC3590 RTC3590 Open (Locked) Position RTC3590 Closed Position

    GenRight

    Stop-Lock for TJ Swing Out Rear Tire Carrier

    This is the "Stop / Lock" for the GenRight Swing Out rear tire carrier that fits the Jeep TJ / LJ (1997 - 2006).It allows the tire carrier to be opened all the way and locked into position automatically so the rear cargo area can be...

    $149.99
  • Dash V-bar for the GenRight TJ & LJ Roll Cage kits V-bar installed on the cage How it looks in the Jeep

    GenRight

    Dash "V" Bar Kit, TJ/LJ

      This is the dash V bar kit for the GenRight brand TJ or LJ roll cages.It is made from heavy .120" thick wall tubing.FEATURES: 1" diameter tubes. Tubes are laser notched for exact fit in your GenRight roll cage. These are weld-in...

    $99.99
  • Door Surround Kit for the Jeep TJ or LJ

    GenRight

    Soft Top Adapter Kit for TJ / LJ

    This is a kit to adapt the factory soft top to the (more narrow) GenRight Off Road Full Roll cage for the Jeep TJ or LJ.FEATURES: Designed to fit the GenRight GRC-2001 or 6001 cage(s) for the Jeep TJ or LJ. Heavy duty mounts. Includes...

    $99.99
  • GenRight's license plate mounting plate for the center of the rear door on a TJ or LJ. TSK-2020 shown here with a license plate on it. Shown here on Andrew's LJ with optional LED-1650 license plate and 3rd brake light. Shown here on the Maxmoto Jeep LJ. Shown here on Jeep Wrangler YJ.

    GenRight

    Tailgate License Plate Mounting Plate

    This is the Tailgate License Plate mounting plate for the Jeep Wrangler (YJ, TJ & LJ) from GenRight Off Road. It simply covers the factory vent and relocates the rear license plate to the center of the rear door on a Jeep Wrangler. It is...

    $99.99
  • Rocker Guard (rock slider) Backing Plates RCG5500 This is how they look after being installed and rhino lined. Here you can see how they are drilled and formed.

    GenRight

    TJ/YJ/CJ/LJ Rocker Guard Backing Plates

    This is a great upgrade for any of the GenRight rocker guards (aka: rock sliders). These backing plates are laser cut and formed from 3/16" thick steel for strength. It is similar to adding a big fender washer, but larger and stronger to pull more of...

    $39.99
52 of 52 Items