null

MADE IN THE USA

GenRight's Gas Tanks are available in a variety of options.

  • EXT - Allows for 4"-5" stretch
  • COMP - 6"-7" stretch
  • Enduro - 5 Gallons over stock
  • Safari - 11 Gallons over stock

All GenRight Tanks are Made in the USA, hand TIG welded, pressure tested, and are DOT and SMOG legal. They utilize your existing factory fuel pump or fuel module, and are 100% bolt in. Comes with a heavy duty 3/16" Steel skid plate, installation instructions, and all necessary hardware.

14 of 14 Items
  • Sale
    GST-4003 GenRight Jeep YJ gas tank, Extended range fuel tank with skid plate Fuel tank and skid shown here in a Jeep Wrangler YJ with leaf spring suspension. Basic dimensions for the GST-4003 GenRight Jeep YJ gas tank, Enduro fuel tank and skid Reference dimensions to see if it will fit your build

    GenRight

    Jeep YJ (20 Gal) Gas Tank & Skid Plate

    This is the Crawler™ Enduro Gas Tank to fit a Jeep Wrangler YJ (1987 to 1995) models. This is a replacement tank for the factory Jeep fuel tank. This GenRight tank re-uses the factory filler hoses, fuel pump, vent valves and ties into the factory...

    Was: $1,799.99
    Now: $1,599.99
  • Gas Tank Skid Plate for the Jeep Wrangler YJ How the skid plate look on Jeep with Leaf Springs

    GenRight

    Crawler™ Skid Plate - YJ

    This is the GenRight "Crawler" gas tank skid plate to protect the stock Jeep YJ 20 gallon plastic gas tank. FEATURES: Heavy Duty replacement skid plate to protect the stock gas tank Excellent drainage in the corners More ground clearance than...

    $499.99
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

      This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire...

    $299.99
  • GenRight Jeep TJ floor plate assembly This is where it is installed in the rear of the cargo area floor of an '05 TJ When the cover plate is installed it only sticks up 1/8" above the top of the ribs in the floor

    GenRight

    Fuel Pump Access Panel for the Jeep TJ, YJ and CJ-7

      This is the GenRight Off Road rear floor access plate/mount for the Jeep Wrangler TJ, Jeep YJ or Jeep CJ-7 (all models 1976 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without dropping the...

    $169.99
  • 16307 Fuel Pump Wire Harness, heavy duty, Aeromotive

    Aeromotive

    Aeromotive Wire Harness to run Fuel Pump

      This is the heavy duty Aeromotive wire harness to run an aftermarket (high volume & high pressure) fuel pump. Are you considering to switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot...

    $164.95
  • Aeromotive 340 Stealth in-tank pump kit contents Close up of Aeromotive 340 Stealth in-tank pump Aeromotive 340 Stealth in-tank pump application chart Aeromotive 340 Stealth in-tank pump spec sheet Aeromotive 340 Stealth in-tank pump drawing with dimensions

    Aeromotive

    Aeromotive 340 Stealth In-tank Fuel Pump w/sock

      This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340...

    $144.95
  • Sale
    Gas Filler Bezel for stretched Jeep TJ Reshaped bezel still allows for a rear flare and factory filler neck and cap Reshaped bezel still allows for a rear flare and a 40" tire Genright's reshaped bezel allows for a full rear flare & factory filler neck and cap Reshaped bezel still allows for a rear flare, shown here with a 37" tire

    GenRight

    Stretched Jeep TJ Gas Filler Bezel

    This is the GenRight Off Road Gas Filler Bezel for a stretched TJ. It mounts in the drivers side rear corner (near the stock location) and has been reshaped to be pushed back, yet still clear a full rear flare (plastic or tube style). This bezel is...

    $39.99
  • JP27833 Rubber gasket for the Jeep Wrangler YJ fuel pump module

    GenRight

    YJ Fuel Pump Module Gasket

    This is a replacement rubber gasket for the factory Jeep YJ Fuel Pump module / sending unit. Fit all GenRight Jeep YJ & CJ tanks. It also fits the stock '87-'95 Jeep Wrangler YJ's with 6 cylinder plastic gas tanks. p/n: JP27833

    $24.99
  • GST4053 and GST2053 Frame Sleeves w/ Hardware Close up of the sleeve on forward gas tank mount Sleeve shown here on tank mount. Shown here where they would go thru the frame, on each side

    GenRight

    GST4053 and GST2053 Frame Sleeves

    This is the Frame Sleeve kit for the Jeep TJ or YJ. It necessary if bolting up a GenRight gas tank through the factory frame to keep from crushing the frame when tightening to two forward bolts on the skid plate. One sleeve and bolt is used per side...

    $9.99
  • Replacement GenRight Crawler Gas Tank Sticker Originally on our gas tanks, they can be used anywhere.

    GenRight

    GenRight Gas Tank Crawler Sticker

      This is a super high quality vinyl decal, just like the stickers we use on the GenRight Jeeps!This sticker features the GenRight Gas Tank Crawler logo. This is replacement for anyone that scraped their crawler sticker off on an awesome...

    $3.00
14 of 14 Items