null

Made in the USA Since 2006

Jeep YJ

14 of 14 Items
  • Jeep Wrangler YJ Laser Notched Full Roll Cage Kit (base kit) Jeep Wrangler YJ Full Roll Cage Kit Shown with optional bars The same cage we ran in the growler YJ for years! The GenRight YJ cage fits under hard or soft tops too! YJ Full Roll Cage Kit Shown with Optional Harness and X Bars

    GenRight

    Jeep Wrangler YJ Laser Notched Full Roll Cage Kit

    This is a complete replacement roll cage kit for your Jeep Wrangler YJ (1987 - 1995). It was carefully designed for maximum foot room and windshield visibility, to fit with a factory hard or soft top. Yes, it has head room for passengers to ride in...

    $2,499.99
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed in the Jeep!

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits.It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats).The kit...

    $299.99
  • GenRight GRC-5100 side plates Side Plates for Roll Cage Harness Bar Kit Kit includes aluminum side plates ONLY (as pictured) Tabs welded into position

    GenRight

    Side Plates for Roll Cage Harness Bar Kit

    This is the GenRight logo's aluminum side plates, just like we run on many of our GenRight Jeeps. These were made for the side of the GenRight Harness Bar Kit (GRC-2060) on the GenRight roll cage kits.FEATURES: Includes one L & R GR...

    $49.99
  • Behind the seat "X" bar for the GenRight YJ and CJ cages. Wise addition if you are out there going for the big stuff. Tubes are bent back to allow for plenty of seat clearance.

    GenRight

    Behind Seat "X" Bar Kit for YJ & CJ-7

    This is the GenRight Behind the seat "X" bar kit for the GenRight YJ and CJ Full roll cage kits.Kit includes 4 tubes that have been laser cut and mitered to fit the cage kit.It is made from heavy .120" thick wall 1-3/4" D.O.M. tubing...

    $299.99
  • GenRight Off Road's Jeep YJ Stanchion kit. Semi assembled YJ stanchion. Here you can see how the GenRight stanchion fits tight to the tub. Here you can see how the stanchion fits with a factory half door and dash.

    GenRight

    YJ Cage Stanchions

    PRICE REDUCTION! Building your own cage?Then the GenRight Stanchion or Leg at the dash for the Jeep YJ is for you. It is designed to fit tight to the dash and maximize leg room.This kit is a complicated series of brackets that are laser cut...

    $299.99
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
  • Dash V-bar for the Jeep YJ and CJ GenRight roll cage kits Shown here in the GenRight built Growler YJ out on the trail Tony used all the optional tubes on the roll cage in his Jeep YJ

    GenRight

    Dash "V" Bar Kit, YJ & CJ

    This is the dash V bar kit for the GenRight brand YJ & CJ roll cages.It is made from heavy .120" thick wall tubing.FEATURES: 1" diameter tubing. Tubes are laser cut and notched for an exact fit in your GenRight cage. These bars are...

    $99.99
  • Cage to Frame Tie-in Kit Typical cage to Frame Tie-in Kit Installed

    GenRight

    Universal Jeep Cage to Frame Tie in Kit

    This is the GenRight universal frame tie-in kit to upgrade any brand cage through the floor and to the frame. This product is sold as a "builders" kit and needs to be fitted and finish welded to properly install it on your vehicle. It has been...

    $149.99
  • Optional C-pillar add on bar, ties the two C-pillars together Pictured here with optional tube couplers installed on each end to make it removable.

    GenRight

    Behind Seat Bar, C Pillar

    This is the GenRight behind the seat bar for any TJ, LJ, YJ or CJ GenRight cage C-Pillar. Additional tube adds strength to the rear section of the roll cage. Tony recommends on every cage.FEATURES: Cut to length (to fit GenRight FULL cage kits)...

    $149.99
  • C-Pillar Tie In Kit parts for the Jeep Wrangler YJ, hardware included. Here you can see how the C-pillar tie-in kit installs into the rear shock tower

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep YJ

    This is the GenRight Off Road C-pillar tie-in kit for the Jeep Wrangler YJ Roll Cage. It ties the bottom of the C-pillar mounting plate (through the fender well) into the side or top of the outboard rear shock mount (essentially the frame) for...

    $129.99
  • Sale
    Filler piece from Aluminum roof to windshield on a TJ, LJ, YJ, CJ with GenRight cage See filler piece here between roof AND windshield See filler piece here between roof AND windshield

    GenRight

    Filler Piece for TJ / LJ / YJ / CJ-7 Aluminum Roof

    This is the "filler" piece that fits between the windshield and the GenRight aluminum roof for the GenRight TJ, LJ, YJ or CJ Roll Cage(s). It is constructed from 6061-T6 Aluminum, it attaches with the same 4 bolts that hold down the front of the roof to...

    $99.99
  • Weld In Grab Handles for GenRight Jeep Roll Cages (Pair) These handles are perfect size for getting in your Jeep. Small handles pictured here on a GenRight cage in a JK Small handles work great front or rear! Small handles allow for maximum entry room into the Jeep

    GenRight

    Weld In Grab Handles for GenRight Roll Cages (Pair)

    This is a pair of "small" cage grab handles from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep JK, TJ,...

    $49.99
  • Universal Removable Harness Bar w/ 2 bolt Flange Option Universal Removable Harness Bar w/ Formed Tube Clamp Option Universal Removable Harness Bar w/ HD Tube Clamp Option Universal Removable Harness Bar w/ HD Tube Clamp Option Installed The green bar behind the front seats on the B-pillar is this bar kit.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourself'r to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Removable Harness Bar Kit that will allow you to put it in for the big wheeling trips and remove it for everyday life around town...

    $119.99 - $199.99
14 of 14 Items