null

MADE IN THE USA

phone: (805) 584-8635

Steering

64 of 64 Items
  • Wrangler JK RockJock® Currectlync® Tie Rod Compared to Factory Tie Rod (On Right) Wrangler JK RockJock® Currectlync® Tie Rod Steering Stabilizer Hardware Steering Stabilizer Hardware (Assembly)

    RockJock

    Wrangler JK RockJock® Currectlync® Tie Rod

      This is the RockJock® Currectlync® tie rod for the Jeep JK Wrangler's steering. Fits all models of Jeep JK 2007 - 2017. Features 1-1/2" diameter tube construction. Forged tie rod ends and premium jam nuts & adjuster. A heavy duty...

    $423.00
    Add to Cart
  • GenRight Twisted Pitman Arm for the Jeep TJ, LJ, YJ Arm is twisted for optimal geometry and range of motion GenRight Twisted Pitman Arm GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Shown here mounted on a Jeep TJ steering box

    GenRight

    GenRight Twisted Pitman Arm

    This is the innovative Twisted Pitman Arm from GenRight Off Road! This will correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). How? We twisted (or rotated) the drag link mounting...

    $399.99
    Add to Cart
  • GenRight's Hi-Steer Arm for the Elite Suspension Here is the arm on the Currie knuckle with heim steering Here you can see the hi-steer arm on the Currie axle and knuckle.

    GenRight

    Hi-Steer Arm for Currie RockJock Knuckle

    This is the GenRight modified Currie Hi-Steer arm. It has been modified to have the correct geometry to work with the GenRight JK Elite Suspension System. It positions the drag link in the proper location to match the pitman arm length so you can...

    $349.99
    Add to Cart
  • Heavy Duty Currie Fabricated Diff Cover Hardware, fill plug and gasket are included. Currie Fabricated Diff Cover for 60 or 70 axles.

    Currie Ent

    Currie Fabricated Diff Cover 60 or 70

    This is the Currie Heavy Duty Fabricated Differential Cover. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased from...

    $244.99
    Add to Cart
  • Forged 1350 Yoke for Currie 60 or 70, 35 Splines, front or rear

    Currie Ent

    Forged 1350 Yoke for Currie 60 or 70, 35 Spline

    This is a Forged 1350 Yoke for Currie hi-pinion axles. 35 Splines. Fits Front or Rear Currie 60 or 70 axles. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 purchased...

    $239.99
    Add to Cart
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • 6-bolt PRP "flat" Leather Steering wheel PRP wheel shown here in GenRight Terremoto Jeep Wrangler JKU Pictured here with GenRight quick release hub on the Flat PRP wheel

    PRP

    PRP Leather Flat Steering Wheel

      PRP’s Steering Wheels are Built for Off-Road. Constructed from high strength aluminum, with a matte black finish for extra durability… and to make it look cool. The steering wheel has 6 point bolt pattern, specifically chosen because...

    $169.99
    Add to Cart
  • Currie Blank Hi-Steer Arm, Drivers Side (Left). Shown here bolted to a front axle assembly.

    Currie Ent

    Currie Hi-Steer Arm, Driver (LEFT) Side

    This is the Currie Hi-Steer Arm, Driver (LEFT) Side of a front axle. Knuckle must be machined to fit this Hi-Steer arm. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70...

    $129.99
    Add to Cart
  • Currie Blank Hi-Steer Arm, Passenger Side (Right). Shown here bolted to a front axle assembly.

    Currie Ent

    Currie Hi-Steer Arm, Driver (RIGHT) Side

    This is the Currie Hi-Steer Arm, PASSENGER (RIGHT) Side of a front axle. Knuckle must be machined to fit this Hi-Steer arm. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70...

    $129.99
    Add to Cart
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • GenRight's Needle Bearing Roller to protect your Tie Rod Needle Bearing Roller for your Tie Rod Installed on the front diff cover, prevents the tie rod from getting bent

    GenRight

    Needle Bearing Roller for Tie Rod

    Have you ever bent your tie rod? Well that is because it's so long and only supported on either end. This is a Roller Bearing which is mounted on the front diff cover and effectively shortens the length of the tie rod. Thereby supporting the tie rod...

    $99.99
    Add to Cart
  • .250" think wall DOM material is perfect for lower links

    GenRight

    CrMo Tubing, 1-3/8" x .188" wall x 60"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 60" CrMo seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for your steering Tie Rod. You cut to the length you need for your...

    $93.00
    Add to Cart
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
    Add to Cart
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
    Add to Cart
  • Steering box brace for the Jeep Wrangler TJ Close up of the clamp for the bottom of the steering box housing Shown here on a GenRight Tracer build

    GenRight

    Steering Box Brace, Jeep TJ (Saginaw box)

      This is a steering box brace for a Jeep Wrangler TJ or LJ Unlimited (with GenRight Tracer Kit installed). This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added...

    $89.40
    Add to Cart
  • Steering box brace for the Jeep Wrangler YJ Close up of the clamp for the bottom of the steering box housing

    GenRight

    Steering Box Brace, Jeep YJ (Saginaw box)

    This is a steering box brace for a Jeep Wrangler YJ. This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added stress from larger tires or a front locker. This brace is...

    $89.40
    Add to Cart
  • 1-3/8" DOM Tubing (.188" Wall) 3 ft. Long

    GenRight

    DOM Tubing, 1-3/8" x .188" wall x 36"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for Drag Link (not tie rods). You cut to the length you need for your...

    $79.99
    Add to Cart
  • Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate

    GenRight

    Jeep TJ/LJ Steering Box Skid Plate

       This is the GenRight Steering Box Skid Plate to fit any '97-06' Jeep Wrangler TJ. Designed to protect the steering box and sector shaft from damage due to hitting obstacles on the trail. Features: Works with aftermarket front...

    $79.99
    Add to Cart
  • Jeep YJ Steering Box Skid Plate GenRight Steering Box skid plate on the Growler YJ Side view of the GenRight steering box skid plate Jeep YJ Steering Box Skid Plate

    GenRight

    Jeep YJ Steering Box Skid Plate

    This is the GenRight Steering Box Skid Plate to fit any '87-95' Jeep Wrangler YJ. It is designed to protect the steering box housing and sector shaft from damage due to hitting obstacles on the trail.Features: Works with aftermarket front...

    $79.99
    Add to Cart
  • Twisted Pitman Arm Removal Tool, STK-2520 Tool threads into the internal threads cut into the pitman arm Tool being threaded into the pitman arm for removal from the steering box Be sure to cap off the internal threads from dirt and moisture!

    GenRight

    Twisted Pitman Arm Removal Tool

    This is the Removal Tool (or pitman arm puller) for all the GenRight Twisted Pitman Arms.FEATURES include: CNC machined from tool steel. Hex on the tool is same size (1-5/16") as nut holding the pitman arm on the steering box sector...

    $79.99
    Add to Cart
  • Sale
    RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
    Choose Options
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • Universal 4 Pass Power Steering Cooler Kit Here you can see how this thin cooler mounts behind the grill

    GenRight

    4 Pass Power Steering Cooler

    This is a 4 Pass cooler (8-1/8" Wide x 5" tall x 3/4" deep), that is an excellent tube-fin heat exchanger, which improves the longevity and overall functioning of your vehicle's power steering system. It installs on the low pressure (return side) of...

    $44.99
    Add to Cart
64 of 64 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap