null

MADE IN THE USA

phone: (805) 584-8635

Suspension

108 of 115 Items
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • .250" think wall DOM material is perfect for lower links

    GenRight

    CrMo Tubing, 1-3/8" x .188" wall x 60"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 60" CrMo seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for your steering Tie Rod. You cut to the length you need for your...

    $93.00
    Add to Cart
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
    Add to Cart
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
    Add to Cart
  • GenRight's Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit, shown here with tube support. Jeep YJ Trac Bar Mount (Frame Side) Kit, shown here with optional side gussets.

    GenRight

    Jeep YJ/CJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit specifically designed for the Jeep Wrangler YJ & CJ. This is the same design we have reliably run on our GenRight Jeeps for years!Front Trac Bar Bracket Kit...

    $89.99
    Add to Cart
  • 1-3/8" DOM Tubing (.188" Wall) 3 ft. Long

    GenRight

    DOM Tubing, 1-3/8" x .188" wall x 36"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for Drag Link (not tie rods). You cut to the length you need for your...

    $79.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • 1-3/4" DOM tubing is perfect for upper links

    GenRight

    DOM Tubing, 1.75" x .120" wall x 36"

      This is 1.75" diameter x .120" thick wall x 3' D.O.M. seamless tubing.Great for use on upper control arms.Same thing we use for the upper links on all our GenRight Suspension kits.FEATURES: 1-3/4" O.D. (Outer Diameter) Hi strength Drawn...

    $69.99
    Add to Cart
  • .120" thick wall tubing is pre-bent and perfect for front shock hoops. Here is a set of hoops being tacked into place on a Jeep frame

    GenRight

    Tube Shock Hoops, 1-1/2" x .120" wall

    This is a pair of 1.50" (1-1/2) diameter x .120" (1/8) thick wall tubing, bent into shock hoops (from our FSM-2004 and FSM-2005 front shock mount kits). Same thing we use on our GenRight TJ, YJ & CJ Long Travel Legend Suspension kits. Perfect for...

    $69.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

      This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • 4 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    GenRight

    4 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    Another Genuine Ideas from GenRight!This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We...

    $59.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height or...

    $59.99
    Add to Cart
  • 2 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    GenRight

    2 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We offer this clamp in a 2 bolt or 4 bolt...

    $49.99
    Add to Cart
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
    Add to Cart
  • Universal HD Axle Side Trac Bar Mount (Kit) This is what the part looks like after you weld it together Shown here tack welded into place to verify everything clears before final welding

    GenRight

    Universal HD Axle Side Trac Bar Mount (Kit)

    This is a Builders Kit product, it does NOT come welded (If you'd like to buy the welded version, it can be found here). Features: Designed to maximize the mounting space and allow clearance for the shock and steering. Design to...

    $49.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • Sale
    Polyurethane Bump Stop

    Daystar

    Polyurethane Bump Stop w/Threaded Stud

    This is a pair (2) of Urethane Bump Stop pads.Features: 2" diameter 1.5" thick Ideal for low speed rock crawling. Compact and versatile 3/8"-16 x 1" Long Threaded Stud is molded into urethane Includes Nyloc Nuts Includes (2) Urethane...

    $29.99
    Add to Cart
  • TABS ONLY for the GenRight Off Road's Universal Transmission Crossmember Kit 4 tabs only for the BKT-1050 Cross member kit Close up of the TABS on each side of the urethane cross member kit. TABS welded to the inside of the frame so there is clearance for your exhaust. Drop in trans cross member kit tube provides clearance for t-case yoke and exhaust pipes.

    GenRight

    Universal Transmission Crossmember TABS

    This is the four TABS only for the GenRight Universal Cross Member Kit.   Features: 4 Laser cut tabs (from the BKT-1050 kit). Includes what is pictured. 100% Made in U.S.A. Important Notes: Designed to work with GenRight Belly Up...

    $19.99
    Add to Cart
  • 5/16" Rivnut Installation Tool Exploded view of the Rivnut tool and parts. Push it into the hole, hold the nut with a wrench and thread the bolt in until it stops After the Rivnuts are installed they sit flush with the body. Here you can see some Rivnuts being used to hold on Corner Guards.

    GenRight

    5/16" Rivnut Installation Tool

    Use this tool to install 5/16-18 (thread) Rivnuts on your off road Jeep Wrangler. Includes: (1) 5/16-18 Rivnut (as pictured) (1) Grade 8 bolt (2) Hardened washers (1) Flange nut. Simply push the assembly into the hole, hold the flange nut with...

    $15.99
    Add to Cart
  • 1/4" Rivnut Installation Tool Exploded view of the Rivnut tool from GenRight They can be installed using air or electric power tools Here you can see how the Rivnut is flush with the body after installed. Here you can see how the Rivnut is flush with the body after installed.

    GenRight

    1/4" Rivnut Installation Tool

    Use this tool to install 1/4-20 (thread) Rivnuts on your off road Jeep Wrangler. Includes: (1) 1/4-20 Rivnut (as pictured) (1) Grade 8 bolt (2) Hardened washers (1) Flange nut. Simply push the assembly into the hole, hold the flange nut with a...

    $14.99
    Add to Cart
  • 5/16"-18 X 1" Flat Head Socket Bolts (10 Pack) Here you can see these countersunk SS bolts on the GenRight rockers and corner guards

    GenRight

    5/16"-18 X 1" Flat Head Socket Bolts (10 Pack)

    This item is a 5/16"-18 X 1" long Stainless Steel Flat Head Socket Bolts (10 Pack). These are the same allen bolts we use in our Rocker Guard Kits, Corner Guard Kits, Tub Panel Guards and More. Accepts a 3/16" allen key wrench. We also sell matching...

    $14.99
    Add to Cart
  • Sale
    Super strong, these mounts are laser cut and formed from 3/16" thick cold rolls steel. Shown here welded on a 1.5" diameter tube. Shown here welded onto an axle (inner C).

    GenRight

    Shock Mounting Tabs (Pair)

    These are top quality shock mounting brackets (tabs) from GenRight Off Road. The benefit of a formed mount like this, is they are much stronger and provide more weld surface area than two individually welded tabs. FEATURES: Laser cut from Heavy...

    $14.99
    Choose Options
108 of 115 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap