null

MADE IN THE USA

All GenRight Gas Tanks are Made in the USA, hand TIG welded, pressure tested, and CARB compliant (not CARB legal). They utilize your existing factory fuel pump or fuel module, and are 100% bolt in. Most tanks also come with a heavy duty 3/16" powder coated steel skid plate.

 

• 100% TIG Welded 1/8" thick aluminum alloy tank.
• Pressure tested for 24 hours to ensure each and every tank is completely sealed
• All tanks come with a 3/16" thick steel skid plate (except BST tanks)
• Accepts the factory fuel pump module (or fuel level sending unit).
• Reuses all of the factory EVAP connections (no check engine lights).

 

GenRight's Auxiliary and replacement Fuel Tanks are available in a variety of options.

 

EXT - Allows for 4-5" of stretch (depending on the axle)

COMP - 6-7" of stretch (depending on the axle)

Enduro - No stretch, 5 gallons over stock

Safari - No stretch, 11 gallons over stock

52 of 52 Items
  • Aeromotive 340 Stealth in-tank pump kit contents Close up of Aeromotive 340 Stealth in-tank pump Aeromotive 340 Stealth in-tank pump application chart Aeromotive 340 Stealth in-tank pump spec sheet Aeromotive 340 Stealth in-tank pump drawing with dimensions

    Aeromotive

    Aeromotive 340 Stealth In-tank Fuel Pump w/sock

      This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340...

    $144.95
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $947.95
  • APR-1000 Fuel pump ring, TJ

    GenRight

    Fuel Pump Ring, 1997 - 2004 TJ / XJ

    This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

    $299.99
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

      This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire...

    $299.99
  • Long Fuel Pump Extension Kit Extended pump module vs stock height. Comparison to factory rods (on right)

    GenRight

    Factory Fuel Pump Extension Kit - Deep

    This is our longest extension kit that allows you to use your factory Jeep fuel pump by extending the module to reach the bottom of the higher capacity GenRight fuel tank. FITS: GST-2100-2 (2005 & 2006). GST-8007-2 (2007 thru 2018)...

    $79.99
  • JK Fuel Pump Extension Kit Comparison to factory rods (on right)

    GenRight

    JK Factory Fuel Pump Extension Kit

    This kit allows you to use your factory Jeep JK fuel pump with our 25 Gallon Gas Tank for Jeep JK (GST-8550-2) by extending it to reach the bottom of the fuel tank. NOTE: Some aftermarket fuel pump modules are slightly different and may not work with...

    $79.99
  • Aeromotive to GenRight Tank Fuel Pump Adapter Phantom with GenRight adapter ring Phantom in tank pump unit with GenRight Adapter on it Assembly ready to go into the gas tank Phantom fuel pump module installed on GenRight gas tank (fuel pump ring is part of tank)

    GenRight

    Aeromotive to GenRight Tank Fuel Pump Adapter

    This is a billet machined aluminum "adapter" plate from GenRight Off Road. It allows you to run an Aeromotive Phantom series fuel pump module (single or dual) in your GenRight Gas Tank. NOTES: The GenRight adapter plate only fits the -2...

    $69.99
  • Gas tank skid plate for the Jeep Wrangler TJ or LJ

    GenRight

    Crawler™ Skid Plate - TJ/LJ

      This is the GenRight Crawler Gas tank skid plate for the Jeep TJ or Jeep LJ Unlimited. FEATURES: Heavy Duty replaces your stock skid plate to better protect the stock gas tank from being damaged New design has a dimple in center for proper...

    $499.99
  • Sale
    Gas Filler Bezel for stretched Jeep TJ Reshaped bezel still allows for a rear flare and factory filler neck and cap Reshaped bezel still allows for a rear flare and a 40" tire Genright's reshaped bezel allows for a full rear flare & factory filler neck and cap Reshaped bezel still allows for a rear flare, shown here with a 37" tire

    GenRight

    Stretched Jeep TJ Gas Filler Bezel

      This is the GenRight Off Road Gas Filler Bezel for a stretched TJ. It mounts in the drivers side rear corner (near the stock location) and has been reshaped to be pushed back, yet still clear a full rear flare (plastic or tube style). This...

    $39.99
  • Replacement GenRight Crawler Gas Tank Sticker Originally on our gas tanks, they can be used anywhere.

    GenRight

    GenRight Gas Tank Crawler Sticker

      This is a super high quality vinyl decal, just like the stickers we use on the GenRight Jeeps!This sticker features the GenRight Gas Tank Crawler logo. This is replacement for anyone that scraped their crawler sticker off on an awesome...

    $3.00
  • Gas Tank Skid Plate for the Jeep Wrangler YJ How the skid plate look on Jeep with Leaf Springs

    GenRight

    Crawler™ Skid Plate - YJ

    This is the GenRight "Crawler" gas tank skid plate to protect the stock Jeep YJ 20 gallon plastic gas tank. FEATURES: Heavy Duty replacement skid plate to protect the stock gas tank Excellent drainage in the corners More ground clearance than...

    $499.99
  • Gas Tank Skid Plate for the Jeep CJ-7 How the skid plate look on Jeep with Leaf Springs

    GenRight

    Crawler™ Skid Plate - CJ

    This is the GenRight Crawler™ Heavy Duty 3/16" thick gas tank skid plate for the Jeep CJ-7 (1974 to 1986). It will fit the stock 20 gallon plastic gas tank or it can be upgraded at a later date to our 20 gallon aluminum Crawler Enduro tank...

    $499.99
  • Fuel Pump Access Panel for the Jeep LJ GenRight's fuel tank access plate is cut into the rear floor section of a Jeep LJ

    GenRight

    Fuel Pump Access Panel for the Jeep LJ

    This is the GenRight Off Road rear floor access plate for the wider floor ribs on the Jeep Wrangler Unlimited LJ (all models 2003 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without...

    $169.99
  • GenRight Jeep TJ floor plate assembly This is where it is installed in the rear of the cargo area floor of an '05 TJ When the cover plate is installed it only sticks up 1/8" above the top of the ribs in the floor

    GenRight

    Fuel Pump Access Panel for the Jeep TJ, YJ and CJ-7

      This is the GenRight Off Road rear floor access plate/mount for the Jeep Wrangler TJ, Jeep YJ or Jeep CJ-7 (all models 1976 to 2006). It allows you access to the top of the fuel tank (pump, electrical, hoses, vents, etc) without dropping the...

    $169.99
  • GST4053 and GST2053 Frame Sleeves w/ Hardware Close up of the sleeve on forward gas tank mount Sleeve shown here on tank mount. Shown here where they would go thru the frame, on each side

    GenRight

    GST4053 and GST2053 Frame Sleeves

    This is the Frame Sleeve kit for the Jeep TJ or YJ. It necessary if bolting up a GenRight gas tank through the factory frame to keep from crushing the frame when tightening to two forward bolts on the skid plate. One sleeve and bolt is used per side...

    $9.99
52 of 52 Items