This is the A-pillar UPGRADE for the GenRight JK roll cage (GRC-8001) to allow the cage to work with GenRight's aluminum JK Dash (DSH-8030).
This is for the guy who is willing to remove all/most the factory Jeep JK wiring and dash components.
This kit sit 3" lower than stock, when installed in combination with GenRight aluminum dash allows the GenRight cage to sit lower and provide more visibility.
This is the same thing Tony has in his Terremoto Jeep JK!
This kit includes:
- A completely different set of 2" diameter tubes that go all the way to the floor (as pictured).
- New mounting plates.
- All necessary mounting hardware.
- 100% Made in U.S.A.
Notes:
- Does NOT work with stock dash!
- This Upgrade MUST be added to the roll cage kit before the GenRight aluminum JK dash can be installed (DSH-8030).
- Requires welding to install this product.
- Don't forget to order the optional GenRight Cage to Frame tie in kit! (GRC-8030)
- Designed to work with the GenRight aluminum dash and center console (DSH-8030), but you can also build your own around these cage tubes.
- If you already have a GenRight cage, the original A-pillar cage tubes & plates can be carefully cut off and this new kit welded on.
- Requires a new steering column (STK-8200) or something similar, and does not work with any of the stock dash components.
- Will fit any 2 door or 4 door Jeep JK from 2007 to 2018.
