This is a rear coil spring mounting kit or it can be used as a coil spring correction kit On a Jeep TJ or LJ.
This is a low cost way to move the coil spring back on the frame is laser cut and formed from heavy duty 3/16" and 1/4" thick steel and includes instructions.
This kit can be used with our out board rear shock mount kit (RSM-1000 or RSM-1001) and/or a standard type emulsion rear shock in the stock location (stock shock location is only good for up to a 3" stretch).
This simple design is also adjustable forward or backward 1" once welded in place.
These mounts are universal and can be cut or trimmed to be mounted in any position.
New lower coil mounts (BKT7100CS) are sold separately!
Requires cutting off the old upper coil spring mount and welding on the new one.
Can be used with stock or after market bump stops.
Compatible with body lifts.
NOTE:
- Depending on how far the coil spring is moved rearward, it may require a 2" shorter spring to keep the same ride height.
- It is also a good choice when you are stretching your rear axle back with one of our "Stretch" EXT tank.
Be sure to click on the picture to see larger more detailed images!
1 Review
-
A must for all lifted TJs or LJs
This is a must have for any lifted TJ or LJ. This will fix the horrible spring angle that you get on a TJ/LJ with you use lift springs in the rear. Before, my rear coils would bend and bind so much, it was limiting the amount of up travel my rear axle had. After install, I could actually get my rear tire to stuff all the way up on my TJ without binding. Also, the overall ride quality got much better since the rear springs could now work in a strait up and down motion, no bending or binding.
