Accessories

GenRight

4 Pin TJ '97-'00 Flasher Unit

This is a 4 pin electronic flasher unit to make the turn signals "flash" with LED lights. This flasher is meant for 1997 to 2000 Jeeps running LED lights. It replaces the old Analog type that depend on the resistance from the old...

GenRight

4 Bolt Formed Tube Clamp - 2" (Pair)

Another Genuine Ideas from GenRight!This is a simple formed tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack...

GenRight

4 Bolt Formed Tube Clamp - 1-1/2" (Pair)

Another Genuine Ideas from GenRight!This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We...

GenRight

2 Bolt Formed Tube Clamp - 1-1/2" (Pair)

This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We offer this clamp in a 2 bolt or 4 bolt...

RockJock

1" Motor Lift, TJ/LJ/YJ

This is a 1" lifted motor mount(s) to fit a 1987-2006 Jeep TJ/LJ/YJ vehicles equipped with the 4.0L (or 4.2L) 6 cylinder engine. These specially designed motor mounts lift the front of the engine one inch which produces a reduced driveline angle on...

GenRight

TJ/LJ/YJ 1" Body Lift

This is a high quality urethane type 1" Body Lift for a Jeep TJ, LJ and YJ. This is the same type body lift we use on every GenRight Jeep we build.It is an excellent and necessary upgrade for Jeeps 2003 and newer to fit any brand high clearance gas...

GenRight

Cargo Rack Mounts for GenRight Jeep JL Cage

 This is the Cargo Rack Mounts for the GENRIGHT Brand Roll Cage for a Jeep Wrangler JL. GR Cage bars are require a slightly different angle for the mounts on a stock JL cage ACC-10008. Laser cut from heavy duty 3/16" thick cold rolled...

GenRight

GenRight Cargo Rack Mounts for Factory Jeep JL Cage

  GenRight Cargo Rack Mounts for Factory Jeep Wrangler JL & JLU Cage • Laser cut from heavy duty 3/16" thick cold rolled steel, they will support 200lbs in the GenRight cargo rack. • Once bolted in place the cargo rack can be...

GenRight

GenRight JK/JKU Aluminum Dash Panel Mount - Blank

This GenRight Off Road manufactured "radio plate" plate fits where the factory radio goes in a JK or JKU. The panel comes blank, so you can cut or drill any holes you want for switches, outlets, radios, or other accessories you have...

GenRight

GenRight "GR" Dome Stickers

This is (4) GenRight "GR" DOME stickers. These are the perfect size for accenting tube fenders, roll cages, suspension components or even cell phones. High Quality. Chemical resistant UV protected for long life and durability. Sold four (4) per...

GenRight

GenRight Off Road 8" Long Color Stickers

This is a pair of 8" long GR Stickers. The shape is perfect for putting on roll cages or in the corner of a window. These are high quality color decals! They are chemical resistant and UV protected for long life and durability. Sold as a pair, as...

GenRight

GenRight Off Road 4" Color Stickers

This is a pair of high quality color GenRight "GR" stickers! They are chemical resistant and UV protected for long life and durability. Sold as a pair, as pictured. 4" long.

GenRight

16" Sway Bar Arm (1-1/4" 48 Spline Shaft)

This is the replacement arm for all GenRight REAR sway bars. SPECS: 16" long Sway Bar Arm 1-1/4" diameter 48 Splines Grade 8 Bolt 2 Washers Nylock Nut NOTE: Arm is supplied as a blank and must be drilled.

GenRight

1/2"-13 x 2" GR8 Skid Plate Bolts (Hex Head) - Set of 6

This set of (6) Grade 8 Bolts (Hex Head) which are meant to be a replacements for your Jeep's belly Skid Plate. 1/2-13 x 2" long 

GenRight

1/2"-13 x 2" Skid Plate Bolts (Button Head) - Set of 6

This set of (6) 1/2-13 x 2" Skid Plate Bolts (Button Head) is meant to be a replacement set of bolts for your GenRight Skid Plate.

Universal Cargo Rack Mounts for YJ or CJ-7

  These are the "universal mounts" that allow you to mount the GenRight Cargo Rack (ACC-10100) to the inside of your Jeeps rear fender wells. Laser cut for heavy duty 3/16" thick cold rolled steel, they will support 200lbs in the cargo rack. Once...

GenRight

GenRight Off Road Decal Sheet - 8.5 x 11"

  This is a high quality sheet of various sized GenRight "GR" stickers! These are all on 3M adhesive and laminated for long life and durability. Sheet is 8.5" x 11" big, as pictured.

VIAIR

Viair 450P-Auto Portable Air Compressor

This is the Viair 450P-Automatic offers an automatic shut-off function in a larger portable compressor (than the Viair 400P). This 100% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before...

GenRight

GenRight Aluminum Dash Panel Mount - Blank

This GenRight Off Road manufactured "radio plate" plate fits where the factory radio goes in a TJ or LJ. The panel comes blank, so you can cut or drill any holes you want for switches, outlets, radios, or other accessories you have...

Universal Cargo Rack Mounts (JKU, JK)

  This is the universal mounts allow you to mount your GenRight Cargo Rack (ACC-10100) inside your Jeep's rear cargo area. Fits: 2007-2017 Jeep Wrangler JK (2 door or 4 door) 2003-2006 Jeep Wrangler LJ 1997-2006 Jeep Wrangler TJ Powder coated...

GenRight Cargo Rack Mounts for GR JK (4 Dr.) Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight 4-Door JK Roll Cage.

GenRight Cargo Rack Mounts for GR JK (2 Dr.) Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight 2-Door JK Roll Cage.

GenRight Cargo Rack Mounts for GR LJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight LJ Roll Cage.

GenRight Cargo Rack Mounts for GR TJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight TJ Roll Cage.

GenRight

YJ Fuel Pump Module Gasket

This is a replacement rubber gasket for the factory Jeep YJ Fuel Pump module / sending unit. Fit all GenRight Jeep YJ & CJ tanks. It also fits the stock '87-'95 Jeep Wrangler YJ's with 6 cylinder plastic gas tanks. p/n: JP27833

GenRight

LED Stealth Side Marker Light Kit, 2 light

This is the hard to find super bright amber colored LED's. It can be used as a front blinker or running light. This is the same LED light we chose to be part of our Stealth Side Marker Light kit.GenRight has packaged this Stealth 2...

GenRight

LED Back Up Light (Pair)

This makes a great Back Up or Rock Light! These clear (or white) LED lights are nearly flush and a clean design! These lights will fit GenRight Jeep Rear Bumpers. This is also great option if you are removing you are installing...

GenRight

Ball Valve Parking Brake

This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were...

R1 Concepts

R1 Geomet Series Jeep JL Sahara/Rubicon Drilled & Slotted Brake REAR Rotors

  R1 Concepts Geomet Series REAR rotors for the Jeep JL Sahara or Rubicon. They provide the ultimate stopping power needed for demanding driving and harsh conditions. Manufactured using more Carbon, Chromium, and Molybdenum, these High Carbon...

R1 Concepts

R1 Geomet Series Jeep JL Sahara/Rubicon Drilled & Slotted Brake FRONT Rotors

R1 Concepts Geomet Series FRONT rotors for the Jeep JL Sahara or Rubicon. They provide the ultimate stopping power needed for demanding driving and harsh conditions. Manufactured using more Carbon, Chromium, and Molybdenum, these High Carbon rotors...

R1 Concepts

R1 Geomet Series Jeep JL Sport Drilled & Slotted Brake REAR Rotors

R1 Concepts Geomet Series REAR rotors for the Jeep JL Sport. They provide the ultimate stopping power needed for demanding driving and harsh conditions. Manufactured using more Carbon, Chromium, and Molybdenum, these High Carbon rotors offer...

R1 Concepts

R1 Geomet Series Jeep JL Sport Drilled & Slotted Brake FRONT Rotors

R1 Concepts Geomet Series FRONT rotors for the Jeep JL sport. They provide the ultimate stopping power needed for demanding driving and harsh conditions. Manufactured using more Carbon, Chromium, and Molybdenum, these High Carbon rotors offer...

Aeromotive

Aeromotive Phantom Returnless In-Tank Fuel Pump & Baffle System

This is the Aeromotive Phantom P/N 18329 EFI RETURNLESS in-tank EFI fuel pump kit, that is internally regulated. It is a direct replacement for any Jeep manufactured between 2003 and current. Featuring the same simple, fabrication free...

Aeromotive

Aeromotive Wire Harness to run Fuel Pump

  This is the heavy duty Aeromotive wire harness to run an aftermarket (high volume & high pressure) fuel pump. Are you considering to switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot...

R1 Concepts

R1 Carbon Geomet Series Jeep JK Drilled Rotors (Starting @ 99.99)

R1 Carbon Geomet Series rotors provide the ultimate stopping power needed for demanding driving and harsh conditions. Manufactured using more Carbon, Chromium, and Molybdenum, these High Carbon rotors offer increased braking performance and strength. A...

GenRight

GenRight Rocker Guard Hardware Kit

This is a universal Replacement hardware kit for any model GenRight Rocker Guards.