Replacement Parts

GenRight

Bushings for Universal Trans Cross Member

This is a replacement Urethane (Rubber) Bushings for the GenRight Off Road Universal Transmission Cross Member (BKT-1050). These bushings can be used on either side of the cross member. Sold as a pair (4 urethane bushings and 2 tube sleeves). Easy to...

GenRight

GenRight Laser Cut Jeep Grill Fire Pit, Small

Show your family and friends that you are a die hard Jeep fan with this new SMALL (travel size) Jeep Grill Fire Pit from GenRight Off Road. The EZ-Assemble design requires no tools, fasteners, or other hardware to assemble; the pieces simply...

GenRight

5/16" Rivnut Installation Tool

Use this tool to install 5/16-18 (thread) Rivnuts on your off road Jeep Wrangler. Includes: (1) 5/16-18 Rivnut (as pictured) (1) Grade 8 bolt (2) Hardened washers (1) Flange nut. Simply push the assembly into the hole, hold the flange nut with...

Aeromotive

Aeromotive 340 Stealth In-tank Fuel Pump w/sock

  This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340...

GenRight

Bushing & Sleeve for Hinge Side of ALUM Swing Out Tire Carrier, pair

This is a replacement Urethane (Rubber) Bushing & Sleeve for the HINGE side of a GenRight Off Road Swing Out Rear Tire Carrier. These bushings can only be used on the HINGE (or pivot) side of the GenRight Aluminum swing out tire carrier. Fits...

GenRight

Jeep JK Dome Light Housing (For GenRight Cages)

This kit is meant for use with GenRight Roll Cages for Jeep JK. It allows you to re-use your factory dome/courtesy light with your GR cage in a clean, sleek package that you simply weld on to your GenRight Cage during assembly. *Note: Factory light is...

GenRight

Replacement Bushings for Latch Side of Aluminum Swing Out Tire Carrier

This is a replacement Urethane (Rubber) Bushing & Sleeve for the Aluminum GenRight Off Road Swing Out Rear Tire Carrier. These bushings can only be used on the LATCH (or pin) side of the GenRight swing out tire carrier. Fits TJ. LJ or JK...

GenRight

Replacement Shock Bolt Kit

Replacement Shock Bolt Kit This is a direct replacement for the standard shock bolt that comes with all GenRight Suspension Kits. Includes: (1) 1/2-20 x 2-1/2" long Grade 8 Bolt (4) Shock Spacers (2 sizes) (2) Grade 8 Washers (1) 1/2-20 Uni Torque...

Factor 55

Factor 55 Soft Shackle (10" or 20")

This is the Factor 55 Soft Shackle. We have used this exact same thing at KOH for years! Fast and Safe! Gator-Jaw™ soft shackles are made from Plasma® rope which is the highest strength synthetic rope available. Gator-Jaw™ shackles...

Torco

Torco SR-1r 5W-40 Synthetic Engine Oil

Torco SR-1r Super Street 5W-40 motor oil is a selective cross blend of highly advanced 100% synthetic base oils and proprietary additive systems aimed at increasing power, efficiency and engine protection. Perfect for the Jeep Diesel JL...

GenRight

1/4" Rivnut Installation Tool

Use this tool to install 1/4-20 (thread) Rivnuts on your off road Jeep Wrangler. Includes: (1) 1/4-20 Rivnut (as pictured) (1) Grade 8 bolt (2) Hardened washers (1) Flange nut. Simply push the assembly into the hole, hold the flange nut with a...

GenRight

5/16"-18 X 1" Flat Head Socket Bolts (10 Pack)

This item is a 5/16"-18 X 1" long Stainless Steel Flat Head Socket Bolts (10 Pack). These are the same allen bolts we use in our Rocker Guard Kits, Corner Guard Kits, Tub Panel Guards and More. Accepts a 3/16" allen key wrench. We also sell matching...

GenRight

GenRight Laser Cut Jeep Grill Fire Pit, Large

Show your family and friends that you are a die hard Jeep fan with this new LARGE size Jeep Grill Fire Pit from GenRight Off Road. The EZ-Assemble design requires no tools, fasteners, or other hardware to assemble; the pieces simply interlock with...

Universal Cargo Rack Mounts for YJ or CJ-7

  These are the "universal mounts" that allow you to mount the GenRight Cargo Rack (ACC-10100) to the inside of your Jeeps rear fender wells. Laser cut for heavy duty 3/16" thick cold rolled steel, they will support 200lbs in the cargo rack. Once...

GenRight

DOM Tubing, 2.00" x .250" wall x 36"

This is 2" diameter x .250" thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Long Travel Suspension kits. Perfect for lower control arms. You cut to the length you need. If you want to carry a spare, cut yours...

GenRight

GenRight Tube Fender Insert Buttonhead Bolts (10 Pack)

GenRight Tube Fender Insert Buttonhead Bolts (10 Pack) These are replacement bolts for GenRight Front Tube Fender Inserts.

SwitchPros

SwitchPros 8-Button Programmable Power System

  Eight user-programmable switches Four 35A circuits and four 18A circuits Waterproof, Solid State 125A Power Module RGB Backlighting provides unlimited color options, using Color Picker on App Daisy Chain up to 3 Switch Panels to One Power...

GenRight

GenRight Corner Guard Hardware Kit

This is a universal Replacement hardware kit for any model GenRight corner guards. It includes 5/16-18 stainless steel flat head allen bolts, washers and nuts (as pictured). It even includes a rivnut installation tool, hinge spacers, tabs to tie into...

GenRight

Billet Aluminum Dash Grab Handle

This is the GenRight Off Road aluminum grab handle. Fits with the GenRight Aluminum Dash or the factory Jeep dash. FEATURES: CNC machined billet aluminum Black Anodized Includes new mounting hardware. 100% Made in USA...

GenRight

GenRight Rocker Guard Hardware Kit

This is a universal Replacement hardware kit for any model GenRight Rocker Guards.  

GenRight

Scotch Brite Pad

This is the same 3M brand Scotch Brite pad we use at the GenRight factory to "tune up" all our aluminum products after the manufacturing process. Approximately 6" x 9" in size. Sold each.

GenRight

1/2"-13 x 2" GR8 Skid Plate Bolts (Hex Head) - Set of 6

This set of (6) Grade 8 Bolts (Hex Head) which are meant to be a replacements for your Jeep's belly Skid Plate. 1/2-13 x 2" long 

Torco

Torco Multi-Purpose Grease

This is the Torco Multi-Purpose Waterproof Grease is a lithium complex grease formulated to offer superior lubricating qualities in a wide range of automotive and powersport applications. Excellent waterproofing, shock load protection, extreme...

Factor 55

Factor 55 Flat Link E (Expert)

This is the Factor 55 Flatlink E "Expert". It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. The FlatLink E (Expert) is a variation of our popular foldable standard FlatLink winch shackle mount.  The FlatLink E provides a...

Factor 55

Factor 55 Ultra Hook

This is the Factor 55 Ultra Hook, the world’s safest winch hook! Featuring Industry first Closed System Shackle Mount hole machined into the body of the hook, safety latch retraction pocket resulting in a clear throat opening, integrated...

GenRight

YJ Door Handles, Interior

This is a high quality metal interior door handle for the Jeep Wrangler YJ. Built to last. It easily replaces the stock ones worn or broken handles. These are the same handles Tony is running on his Foreshock YJ. Features: Laser Cut and formed...

GenRight

3/4-16 Grade 8, Trac Bar Bolt w/UniTorque Nut & Washers

This is the same 3/4" bolt we run in our axle side trac bar mount. It is a 3/4-16 x 3" (fine thread) Grade 8 Bolt w/UniTorque Nut and two Washers Includes: (1) Grade 8 3/4-16 Bolt (4) 3/4-16 Unitorque Nut (2) Grade 8 3/4" washers

GenRight

CrMo Tubing, 1-3/8" x .188" wall x 60"

This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 60" CrMo seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for your steering Tie Rod. You cut to the length you need for your...

GenRight

DOM Tubing, 1-3/8" x .188" wall x 36"

This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for Drag Link (not tie rods). You cut to the length you need for your...

GenRight Cargo Rack Mounts for GR TJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight TJ Roll Cage.

GenRight

Two Bolt Weld on Tube Couplers for 1.5" Tubing (Set of 4)

These 1/4" Thick Weld in Tubing Couplers will fit a 1.5" diameter tube, and allow you to bolt the two tubes together using 2 bolts for each tube. This set of 4 will join 2 tubes total. No returns accepted after they have been tacked in place!

GenRight

1/2"-13 x 2" Skid Plate Bolts (Button Head) - Set of 6

This set of (6) 1/2-13 x 2" Skid Plate Bolts (Button Head) is meant to be a replacement set of bolts for your GenRight Skid Plate.

GenRight Cargo Rack Mounts for GR LJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight LJ Roll Cage.

GenRight

Half Door Kit for Scosche BaseClamp™ 5" Round Convex Side Mirrors

This is a mounting kit to adapt the Scosche 5" Convex Side View Mirrors to the top of the GenRight aluminum half doors. FEATURES: Mounts mirror to top of half door (instead of roll cage tube). Fold-Away Design. Designed for standard Scosche side...

Daystar

Polyurethane Bump Stop w/Threaded Stud

This is a pair (2) of Urethane Bump Stop pads.Features: 2" diameter 1.5" thick Ideal for low speed rock crawling. Compact and versatile 3/8"-16 x 1" Long Threaded Stud is molded into urethane Includes Nyloc Nuts Includes (2) Urethane...

GenRight

16" Sway Bar Arm (1-1/4" 48 Spline Shaft)

This is the replacement arm for all GenRight REAR sway bars. SPECS: 16" long Sway Bar Arm 1-1/4" diameter 48 Splines Grade 8 Bolt 2 Washers Nylock Nut NOTE: Arm is supplied as a blank and must be drilled.