Replacement Parts

GenRight

3/4-16 Grade 8, Trac Bar Bolt w/UniTorque Nut & Washers

This is the same 3/4" bolt we run in our axle side trac bar mount. It is a 3/4-16 x 3" (fine thread) Grade 8 Bolt w/UniTorque Nut and two Washers Includes: (1) Grade 8 3/4-16 Bolt (4) 3/4-16 Unitorque Nut (2) Grade 8 3/4" washers

GenRight

9/16" Grade 8 Suspension Bolts w/ UniTorque Nuts & Washers (4 Pack)

This is the same Grade 8, 9/16" hardware we use in our suspension kits. 9/16-18 (fine thread) Grade 8 Bolts w/Unitorque Nuts & Washers (4 Pack) Includes: (4) Grade 8 9/16-18 x 4" bolts (4) 9/16-18 Unitorque Nuts (8) Grade 8 9/16" washers

GenRight

Threaded Step Race Bungs (Each) - Multiple Sizes

These are top quality DIY weld-in "Tube Inserts" or "Bungs" (aka; threaded insert). They are CNC machined from cold rolled (1020) steel can be MIG or TIG welded into the end of your Steering, Sway Bar, Trac Bar or Control Arm tubing. The hex head on...

GenRight

1/2"-13 x 2" GR8 Skid Plate Bolts (Hex Head) - Set of 6

This set of (6) Grade 8 Bolts (Hex Head) which are meant to be a replacements for your Jeep's belly Skid Plate. 1/2-13 x 2" long 

GenRight

1/2"-13 x 2" Skid Plate Bolts (Button Head) - Set of 6

This set of (6) 1/2-13 x 2" Skid Plate Bolts (Button Head) is meant to be a replacement set of bolts for your GenRight Skid Plate.

GenRight

Jeep JK Dome Light Housing (For GenRight Cages)

This kit is meant for use with GenRight Roll Cages for Jeep JK. It allows you to re-use your factory dome/courtesy light with your GR cage in a clean, sleek package that you simply weld on to your GenRight Cage during assembly. *Note: Factory light is...

GenRight

Two Bolt Weld on Tube Couplers for 1.5" Tubing (Set of 4)

These 1/4" Thick Weld in Tubing Couplers will fit a 1.5" diameter tube, and allow you to bolt the two tubes together using 2 bolts for each tube. This set of 4 will join 2 tubes total. No returns accepted after they have been tacked in place!

Vision X

VisionX Xtreme Performance 40 Watt LED 4.7" Light Cannon Pair

  This is a pair of the new CG2 VisionX 40-watt 4.7″ Light Cannon, called the "Xtreme Performance". Our price is better than Amazon! It uses a stronger single 40-Watt LED bulb (over the old standard 25-Watt Cannon) for added power output...

GenRight

GenRight Laser Cut Jeep Grill Fire Pit, Small

  Show your family and friends that you are a die hard Jeep fan with this new SMALL (travel size) Jeep Grill Fire Pit from GenRight Off Road. The EZ-Assemble design requires no tools, fasteners, or other hardware to assemble; the pieces...

Universal Cargo Rack Mounts for YJ or CJ-7

  These are the "universal mounts" that allow you to mount the GenRight Cargo Rack (ACC-10100) to the inside of your Jeeps rear fender wells. Laser cut for heavy duty 3/16" thick cold rolled steel, they will support 200lbs in the cargo rack. Once...

GenRight

Aeromotive to GenRight Tank Fuel Pump Adapter

This is a billet machined aluminum "adapter" plate from GenRight Off Road. It allows you to run an Aeromotive Phantom series fuel pump module (single or dual) in your GenRight Gas Tank. NOTES: The GenRight adapter plate only fits the -2...

SSV Works

SSV MRB3 Bluetooth Audio w/ Screen & Amp

  Looking for a weather & dust proof solution for your Jeep? Well, this is Tony's favorite! This is a surface mounted display that replaces the traditional "stereo head unit" Your Jeep's new "stereo music" will be connected via...

Universal Cargo Rack Mounts (JKU, JK, TJ, LJ)

  This is the universal mounts allow you to mount your GenRight Cargo Rack (ACC-10100) inside your Jeep's rear cargo area. Fits: 2007-2017 Jeep Wrangler JK (2 door or 4 door) 2003-2006 Jeep Wrangler LJ 1997-2006 Jeep Wrangler TJ Powder coated...

GenRight Cargo Rack Mounts for GR JK (4 Dr.) Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight 4-Door JK Roll Cage.

GenRight Cargo Rack Mounts for GR JK (2 Dr.) Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight 2-Door JK Roll Cage.

GenRight Cargo Rack Mounts for GR LJ Cage

  These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight LJ Roll Cage.

GenRight Cargo Rack Mounts for GR TJ Cage

These allow you to mount your GenRight Cargo Rack (ACC-1000) to your GenRight TJ Roll Cage.

Torco

Torco SR-5R 5W-30 Synthetic Racing Oil

Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5 utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

GenRight

YJ Fuel Pump Module Gasket

This is a replacement rubber gasket for the factory Jeep YJ Fuel Pump module / sending unit. Fit all GenRight Jeep YJ & CJ tanks. It also fits the stock '87-'95 Jeep Wrangler YJ's with 6 cylinder plastic gas tanks. p/n: JP27833

Vision X

VisionX Optimus LED light Kit w/mounts for JK

  This is a pair of VisionX Optimus LED (cube shaped) Lights with mounting brackets for the bottom of JK windshield (a-pillar) by GenRight. The Optimus Series are LED Driving Lights, advancing lighting technology to the next level. Utilizing...

Aeromotive

Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

Torco

Torco SGO 75W-140 Synthetic Gear Oil

  We run Torco Synthetics because they are the best! It's what we use in every GenRight built Jeep and Ultra4 race vehicle! SGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed...

GenRight

Scotch Brite Pad

This is the same 3M brand Scotch Brite pad we use at the GenRight factory to "tune up" all our aluminum products after the manufacturing process. Approximately 6" x 9" in size. Sold each.

GenRight

Replacement Bushing & Sleeve for Hinge Side of ALUM Swing Out Tire Carrier, pair

This is a replacement Urethane (Rubber) Bushing & Sleeve for the HINGE side of an ALUMINUM GenRight Off Road Swing Out Rear Tire Carrier. These bushings can only be used on the HINGE (or pivot) side of the GenRight Aluminum swing out tire...

GenRight

RivNuts 5/16"-18 (10 Pack)

This is the same hi-quality hardware offered by Gen-Right Off Road on all "Full" Corners, Rockers and Tub Panel Guards. RivNuts are the perfect (and permanent) to install attachment points (nuts) in "blind" (double wall areas) on the Jeeps...

GenRight

RivNuts 1/4"-20 (10 Pack)

This is the same hi-quality hardware offered by Gen-Right Off Road on all "Full" Corners, Rockers and Tub Panel Guards. RivNuts are the perfect (and permanent) to install attachment points (nuts) in "blind" (double wall areas) on the Jeeps...

GenRight

Replacement Rear Sway bar Bushings

This is a great way to freshen up your rig with a new set of rear sway bar bushings!  Overtime the nylon bushings can wear creating some "play" which makes a clunking noise.  These new bushings will tighten things up and maintain the...

GenRight

Perforated, G3 Side Panel STD or HI, Pair

  This is the PERFORATED removable panel for the GenRight Tube Fenders. This is an upgraded from the standard "plain" side panel that comes with every one of our G3 Tube Fenders.FEATURES: Perforated holes vent unwanted head from the engine...

GenRight

Latch Pin for Tire Carrier

This is a replacement "latch pin" for any GenRight Off Road "Swing Down" or "Swing Out" rear tire carrier. This is a replacement 1/2" diameter pin.Sold EACH.Self locking feature, T-handle style (as pictured). Replacement Urethane bushings are...

King Shocks

KING 2.0" Coilover Shocks w/ Remote Reservoir (Each)

  This is the KING Brand of 2.0" diameter Coil Over Shock, with remote reservoir. These are the best and most quiet coil over shocks you can buy. KING Shocks have a great name in the off-road world. They build an extremely high quality...

RockJock

Johnny Joint, 1-1/4 Shank by Rock Jock

This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

Griffin

Griffin Universal Fluid Cooler, Large

  This is the Heavy Duty "large" Griffin Aluminum Universal Fluid Cooler. Can be used for engine oil, transmission fluid or power steering fluid cooling.FEATURES: Overall size is 19.75" x 13" x 6.5" thick (includes cooler and fan). Actual...

GenRight

GenRight Gas Tank Crawler Sticker

  This is a super high quality vinyl decal, just like the stickers we use on the GenRight Jeeps!This sticker features the GenRight Gas Tank Crawler logo. This is replacement for anyone that scraped their crawler sticker off on an awesome...

GenRight

Fuel Pump Ring, 2005 - 2018 TJ / LJ / JK

This is the fuel pump adapter ring for any 2005 - Current factory type fuel pump modules on the Jeep TJ, LJ, and JK. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks...

GenRight

Fuel Pump Ring, 1997 - 2004 TJ / XJ

This is the fuel pump adapter ring for any 97-04 factory type fuel pump modules on Jeep TJ or XJ. The GenRight Crawler™ Series Fuel Pump Tank rings are great for adapting your factory pump to other aftermarket tanks (metal or plastic)...

GenRight

DOM Tubing, 2.00" x .250" wall x 36"

  This is 2" diameter x .250" thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Long Travel Suspension kits. Perfect for lower control arms. You cut to the length you need. If you want to carry a spare, cut...