null

MADE IN THE USA

Questions? CALL US 805-584-8635

All of GenRight's Suspension Systems:

• Proven quality, performance and durability.
• Utilize the GenRight gas tank to allow more room or bigger axles.
• Are weld-on for optimal bracket location(s) and so nothing hangs down.
• Move the spring and dampening control out the wheels (in the optimal position).
• Use higher quality thicker materials for long term durability.
• Use proven quality Genuine Johnny Joints (serviceable).
• Utilize Top quality coilover shocks (King, Fox or Bilstein) with GenRight’s spec valving, spring rates and hose routing.
• Are quiet because of the bind free GenRight 3 link front and 4 link rear suspension.
• Keep the steering box for optimal performance! We have our own spec ram assist kits.

• Designed around high pinion Currie axles that are custom built to GenRight’s specs for best durability and performance off-road.

100% American Made!


The GenRight Legend Kit is our original suspension designed for the do-it-yourselfer with a CJ, YJ, TJ or LJ. Available in single or double triangulated version. It allows you to do a little bit at a time, pick your own desired wheelbase, axles (brand and width), tire size and drivetrain combo.

GenRight Tracer kit is geometry that was originally off-road race Inspired, this “system” is designed for the person that wants the highest level of performance from their Jeep on & off road. Longer wheelbase, lower center of gravity, & maximum suspension travel. Designed around a Chevy LS3, 4L80 transmission (or stock drivetrain), Currie axles, & Atlas transfer case.

36 of 89 Items
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit for 3.5" axle tubes SUP-2002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit for 3.5" tubes

    This is the axle side, lower bump stop "pad" from GenRight Off Road. Specifically designed for the larger 3.5" axle tubes, like a 14 bolt. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with...

    $199.99
  • GenRight's Axle Side 20 degree Lower Control Arm Mount for 3.5" tubes One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for the larger 3.5" diameter axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line...

    $69.99
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets for 3.5" tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically made for 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the...

    $69.99
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 for 3.5" diameter axle tubes Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for larger 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly...

    $69.99
  • BKT-2110 lower control arm 10 degree brackets for a 3.5" diameter axle tube. Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Made specifically to fit the larger 3.5" tube axles like a 14 Bolt or other aftermarket axle housings. Heavy Duty 1/4" thick is precision formed into shape so...

    $69.99
  • CE-9110T Johnny Joint Tool for Rebuilds Tool shown here compressing the joint to remove the retainer clip Rock Jock Johnny Joint Sizing Chart

    RockJock

    Tool for Rebuilding 2.5" Johnny Joint

    RockJock's Johnny Joint Tool is designed to make assembly OR disassembly of our 2-1/2 in. Johnny Joint Rod Ends simple! For Johnny Joint rebuilds and repairs, this tool can be used either in a bench vise, or it is compact enough that it may also be...

    $150.00
  • CE-9110RK Rebuild Kit for 2.5" Johnny Joint As delivered CE-9110RK Rebuild Kit for 2.5" Johnny Joint Rock Jock Johnny Joint Sizing Chart Rebuild kit for the Johnny Joint CE-9114 that looks like this

    RockJock

    Rebuild Kit for 2.5" Johnny Joint

    This is a REBUILD KIT for a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie). This patented design has a special compound urethane cup(s) which absorbs the high impact loads from damaging suspension mounts. This is the same joint used on...

    $21.00
  • 4 GenRight Tracer Dome Stickers

    GenRight

    GenRight "TRACER" Suspension Dome Stickers

    This is (4) GenRight "TRACER" Suspension DOME stickers for your Jeep. These are the perfect size for your Jeep to show off your Tracer Suspension system. High Quality. Chemical resistant. UV protected for long life and durability. Sold four (4) per...

    $10.00
  • TABS ONLY for the GenRight Off Road's Universal Transmission Crossmember Kit 4 tabs only for the BKT-1050 Cross member kit Close up of the TABS on each side of the urethane cross member kit. TABS welded to the inside of the frame so there is clearance for your exhaust. Drop in trans cross member kit tube provides clearance for t-case yoke and exhaust pipes.

    GenRight

    Universal Transmission Crossmember TABS

    This is the four TABS only for the GenRight Universal Cross Member Kit.   Features: 4 Laser cut tabs (from the BKT-1050 kit). Includes what is pictured. 100% Made in U.S.A. Important Notes: Designed to work with GenRight Belly Up...

    $19.99
  • GenRight "Tracer" Jeep LJ Coil Over Suspension Kit for LS Engine The Tracer Suspension has great trail manners and flexes out nice! Nice "stance" on a customers LJ, on 40" Yokohama X-MT Tires & 17" KMC Wheels The lowered center of gravity drastically increases stability both on and off-road. Tracer Front 3 Link was designed around an LS3 V8 engine and 4L80 transmission

    GenRight

    Tracer Jeep LJ Coilover Suspension Kit for LS Engine

    This is the all NEW GenRight Off Road Tracer Suspension System for the Jeep Unlimited, Jeep Wrangler LJ. It is the latest way to take your Jeep to a new level of performance that has never been done before! We take all the factory suspension mounting...

    $7,999.99
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
  • Jeep Tj / LJ Legend Suspension Package (Base package pictured) Jeep Tj / LJ Legend Suspension Package (Base package pictured) Turn your Jeep Wrangler TJ into a stable and capable off road machine! Easy to see GenRight Legend kit coil over conversion on the Jeep Wrangler TJ frame. Rear setup with King Coilovers and Air Bumps

    GenRight

    Jeep TJ / LJ Legend Suspension Package

      This is the GenRight "Legend" Coil Over Suspension Package for Jeep Wrangler TJ & LJ (1997-2006) this is the best, most balanced & adaptable suspension system on the market since 2006! This package is also good for a 5"-7" rear...

  • Custom Ron Davis radiator for LS V8 with GenRight Tracer Suspension Custom Ron Davis radiator for LS V8 with GenRight Tracer Suspension Shown here in GenRight Tracer build  with LS V8

    Ron Davis

    Tracer LS Radiator by Ron Davis

    This is a custom Ron Davis radiator we have made for the GenRight Tracer Suspension system (with an LS engine). It is designed (shaped) to clear the extra up travel a GenRight LJ TRACER suspension has. Sold as an option/upgrade to the Tracer kit. This...

    $2,999.99
  • GenRight radiator mounting kit for the Ron Davis radiator for LS V8 GenRight radiator mounting kit for the Ron Davis radiator for LS V8

    GenRight

    LJ Tracer Aluminum Radiator Mounts for LS Engine

    This is the GenRight radiator mounting kit for the Ron Davis radiator we have made for our Tracer builds. It is designed to work with a GenRight LJ TRACER build running a Chevy LS V8. Sold as an option/upgrade to the Tracer kit. This mount is...

    $399.99
  • Howe Performance Ram Assist Kit for the GenRight Tracer LJ Suspension

    HOWE

    Howe Performance Ram Assist Kit for the GR Tracer

      This is the GenRight spec Ram assist kit from Howe Performance. This is a racing quality pump, box and ram. Designed for Extreme Off Highway driving for up to 42" tall tires.-Provides double the turning power/force.-Reliefs stress on steering...

    $3,749.99
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
  • GenRight LS Engine Mounting kit for the Tracer Suspension

    GenRight

    Tracer LS Engine Mounts

      This is the Chevy LS V8 engine mounting kit for the GenRight LJ TRACER suspension system. Sold as an option/upgrade to the Tracer kit. These mounts are designed to move the engine over to the passenger side and clear the upper front link at...

    $1,099.99
  • Steering box brace for the Jeep Wrangler TJ Close up of the clamp for the bottom of the steering box housing Shown here on a GenRight Tracer build

    GenRight

    Steering Box Brace, Jeep TJ (Saginaw box)

      This is a steering box brace for a Jeep Wrangler TJ or LJ Unlimited (with GenRight Tracer Kit installed). This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added...

    $89.40
  • High Capacity Fuel Tank for the Tracer Suspension View of the axle side of the High Capacity Fuel Tank for the Tracer Suspension Side view of the High Capacity Fuel Tank for the Tracer Suspension 100% TIG Welded 1/8" thick Aluminum Tank Here you can see the fit using a Currie 70 rear axle and the 6053 tank

    GenRight

    26 Gal Gas Tank for Tracer Susp w/7" Stretch

    This is the larger capacity fuel tank is designed to work with the GenRight Tracer Suspension System in a stretched Jeep Wrangler LJ. Fully assembled and designed to accept the factory Jeep 05-'06 fuel pump module (or the Aeromotive Phantom in-tank fuel...

    $1,949.99
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

     This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your...

    $149.99
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
  • GenRight Off Road Rear Sway Bar Kit for the Jeep LJ with Tracer Suspension Shown here installed on Jeep LJ frame with GenRight Tracer Suspension System

    GenRight

    Tracer Jeep LJ Rear Sway Bar Kit

      This is the GenRight rear sway bar kit to fit our "Tracer" Jeep LJ Suspension Kit This kit was designed to add stability to your lifted or long travel Jeep Wrangler LJ. It is a weld-on kit. Our sway bar is about 30% stiffer than...

    $999.99
  •  LS Engine Accessory Bracket Mounting Kit Shown here installed on an LS3 in a Jeep LJ Shown here installed on an LS3 with remote steering res above the pump LS Engine Accessory Bracket Mounting Kit Here you can see how we capture the power steering pump onto the LS head

    GenRight

    LS Engine Accessory Bracket Mounting Kit

    This is the GenRight LS Engine accessory mounting bracket kit for your off road Jeep Wrangler. These beefy laser cut brackets move the engine accessories up out of the way. It mounts the GM alternator, PSC power steering pump and reservoir (as...

    $489.99
  • Ram Assist XD Kit from PSC for 38"-42" Tall Tires

    PSC

    PSC Extreme Duty Ram Assist Kit for the GR Tracer

      This is the GenRight spec Ram assist kit from PSC. Designed for Extreme Off Highway driving and 38" to 42" tall tires.-Provides double the turning force-Reliefs stress on steering box and frame mounts-PSC ram assist is the ultimate steering...

    $3,499.00
  • GenRight "Tracer" steering includes, hi-steer arm, pitman arm, CrMo tie rod, drag link & bolts How the Hi-steering kit looks mounted on a LJ with Tracer suspension Close up of how we tilt the heim on drag link into a neutral position on the hi-steer arm

    GenRight

    GenRight Jeep Wrangler LJ "Tracer" CrMo Hi Steer Kit

    This is a "one click" kit to get everything you need to set the steering on your Jeep Wrangler LJ with our Tracer Suspension and a Chevy LS V8. Designed to be a double shear hi-steering on your Currie VXR 60 or RJ70 front axle. This Kit...

    $2,999.99
  • Currie short arm suspension kit for the Jeep TJ or LJ

    RockJock

    Suspension Lift Kit for the Jeep TJ/LJ, CE-9100A

      This is the top quality Rock Jock suspension kit (designed by John Currie). It includes a complete set of 8 genuine Johnny Joint® Control Arms for the 1997-2006 Jeep TJ's and LJ's. All arms are heavy duty and fully adjustable...

    $1,850.00
36 of 89 Items