null

MADE IN THE USA

phone: (805) 584-8635

Suspension

61 of 61 Items
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • BMT-4001 GenRight's Hi-Clearance Body Mount Kit for the Jeep YJ Here you can see the difference between stock and GenRight's The same body mounts Tony had on his Growler YJ

    GenRight

    Body Mount LIFT Kit, YJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on either side (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

     This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your...

    $149.99
    Add to Cart
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
    Add to Cart
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • GenRight's Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit, shown here with tube support. Jeep YJ Trac Bar Mount (Frame Side) Kit, shown here with optional side gussets.

    GenRight

    Jeep YJ/CJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit specifically designed for the Jeep Wrangler YJ & CJ. This is the same design we have reliably run on our GenRight Jeeps for years!Front Trac Bar Bracket Kit...

    $89.99
    Add to Cart
  • Steering box brace for the Jeep Wrangler YJ Close up of the clamp for the bottom of the steering box housing

    GenRight

    Steering Box Brace, Jeep YJ (Saginaw box)

    This is a steering box brace for a Jeep Wrangler YJ. This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added stress from larger tires or a front locker. This brace is...

    $89.40
    Add to Cart
  • Twisted Pitman Arm Removal Tool, STK-2520 Tool threads into the internal threads cut into the pitman arm Tool being threaded into the pitman arm for removal from the steering box Be sure to cap off the internal threads from dirt and moisture!

    GenRight

    Twisted Pitman Arm Removal Tool

    This is the Removal Tool (or pitman arm puller) for all the GenRight Twisted Pitman Arms.FEATURES include: CNC machined from tool steel. Hex on the tool is same size (1-5/16") as nut holding the pitman arm on the steering box sector...

    $79.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

      This is a genuine Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height or...

    $59.99
    Add to Cart
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • Universal 4 Pass Power Steering Cooler Kit Here you can see how this thin cooler mounts behind the grill

    GenRight

    4 Pass Power Steering Cooler

    This is a 4 Pass cooler (8-1/8" Wide x 5" tall x 3/4" deep), that is an excellent tube-fin heat exchanger, which improves the longevity and overall functioning of your vehicle's power steering system. It installs on the low pressure (return side) of...

    $44.99
    Add to Cart
  • TABS ONLY for the GenRight Off Road's Universal Transmission Crossmember Kit 4 tabs only for the BKT-1050 Cross member kit Close up of the TABS on each side of the urethane cross member kit. TABS welded to the inside of the frame so there is clearance for your exhaust. Drop in trans cross member kit tube provides clearance for t-case yoke and exhaust pipes.

    GenRight

    Universal Transmission Crossmember TABS

    This is the four TABS only for the GenRight Universal Cross Member Kit.   Features: 4 Laser cut tabs (from the BKT-1050 kit). Includes what is pictured. 100% Made in U.S.A. Important Notes: Designed to work with GenRight Belly Up...

    $19.99
    Add to Cart
  • 4 High Quality GenRight Legend Suspension Dome Stickers

    GenRight

    GenRight "LEGEND" Suspension Dome Stickers

    This is (4) GenRight "LEGEND" Suspension DOME stickers for your Jeep. These are the perfect size for accenting your Jeep to show off the coil over suspension you have! High Quality. Chemical resistant. UV protected for long life and durability. Sold...

    $10.00
    Add to Cart
61 of 61 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap