null

MADE IN THE USA

phone: (805) 584-8635

If you have any issues placing your order, please CALL US 805-584-8635

3-Link/4-Link Kits

officialsuspensionsponsor.jpgOur suspension kits have been trail tested and race proven. We've taken the knowledge from running thousands of miles of trails and developed suspension kits with optimized geometry for unmatched bind-free suspension performance.

36 of 72 Items
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit for RockJock 60 Lower link mount, shock mount, and limit strap mount

    GenRight

    Front Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $549.99
    Add to Cart
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $329.99
    Add to Cart
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $329.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • GenRight's Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit, shown here with tube support. Jeep YJ Trac Bar Mount (Frame Side) Kit, shown here with optional side gussets.

    GenRight

    Jeep YJ/CJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit specifically designed for the Jeep Wrangler YJ & CJ. This is the same design we have reliably run on our GenRight Jeeps for years!Front Trac Bar Bracket Kit...

    $89.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • GenRight's Rear Axle Bridge, 14 Bolt, Welded Rear Axle Bridge, 14 Bolt on rear axle 14 Bolt Rear Axle Bridge on the axle. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $449.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge / Truss, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

      The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which...

    $399.99
    Add to Cart
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • JK Elite Front Cross Member Assembly Here you can see how it welds into the JK frame. Here is how is mounts to the inside of the frame.

    GenRight

    Elite Front 3 Link Cross Member Kit, 2 or 4 door JK

    This is the Front cross member "kit" for the Jeep Wrangler JK from GenRight's Elite JK Suspension System. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your...

    $1,699.99
    Add to Cart
  • Jeep TJ/LJ Heavy Duty Trac Bar Kit Axle Side of the TJ Trac Bar Bracket Shown here is how the backside of the bracket boxes in around the frame too. Shown here with Twisted pitman arm and mounted on the side of the TJ frame. Laser cut plates show how the mount box around the Jeep TJ frame.

    GenRight

    Jeep TJ & LJ Heavy Duty Trac Bar Kit

    This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. The materials used are twice as thick as stock! This builders kit comes with the Johnny Joint pre-welded on one side and the tubing...

    $649.99
    Add to Cart
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • Jeep TJ/LJ/YJ/CJ-7 Rear 4-Link Rear Kit Jeep on the trail with GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links Detail view of GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links

    GenRight

    Rear 4-Link Kit (Links Optional)

    Triangulated Rear 4-Link Kit for Jeep TJ, LJ, YJ & MoreBind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable Have you been thinking about building your own kit from scratch, or just upgrading to improve the ride quality of...

    $1,499.99 - $2,499.99
    Choose Options
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded 4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
    Add to Cart
  • Jeep TJ/LJ/YJ/CJ-7 Front 3-Link Kit GenRight Front 3-Link w/ Links Installed on Jeep TJ GenRight Front 3-Link w/ Links Installed on BowTie GenRight Front 3-Link Suspension Kit (Skid Plate not Included)

    GenRight

    Front 3-Link Kit (Links Optional)

     Front 3-Link Kit for Jeep TJ, LJ, YJ & More Bind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable This is the 3 Link kit from our Legend Suspension kit. It is called 3 link, but is technically a 4 link when you include...

    $1,599.99 - $2,349.99
    Choose Options
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
    Add to Cart
36 of 72 Items

© 2026 GenRight Offroad All rights reserved. | Sitemap