null

MADE IN THE USA

phone: (805) 584-8635

If you have any issues placing your order, please CALL US 805-584-8635

Suspension

If you're looking for the ultimate suspension for your Jeep, then you've come the right place. We have designed, developed, and innovated a suspension kit that sets a new standard when it comes to performance and funcionality.

 

63 of 63 Items
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $329.99
    Add to Cart
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $329.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • King Shocks 2.0" Air Bump (Qty of 4) - JK Elite

    King Shocks

    King Shocks 2.0" Air Bump (Qty of 4) - JK Elite

      Pair of (4) 2" King Shocks Air Bump Stops for Jeep JK Elite SuspensionFeatures: Precision ground Hard Chrome shafts. Each bump has a precision honed body. Durable Teflon bump on the end. Includes King Shock trademark, Blue...

    $1,519.96
    Add to Cart
  • GenRight's Rear Sway Bar Kit for the Jeep Wrangler JKU (4 door) Here is how the kit looks with Coil over shocks. It mounts to the frame in the rear and ties into the Elite axle side coil over shock mount Here is how the kit looks on a JK with coil springs and standard shocks (Stage 1). Here is how it mounts in the rear above our fuel tank (Any Stage of JK Elite). Mounts behind the rear axle into existing threaded holes in frame.

    GenRight

    JK Sway Bar Kit - Rear

    This is the GenRight Rear Sway Bar kit, designed for use with our GenRight "Elite" JK suspension for the 4 door Jeep Wrangler JK. It is 30% stiffer than other brand Anti-Rock type sway bars (Rock Jock, Teraflex, etc.) on the...

    $999.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge / Truss, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, JK Rear 6"+ Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, JK Rear 6"+ Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep JK REAR with a 3-5" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,399.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, JK Rear 3"-5" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, JK Rear 3"-5" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep JK REAR with a 3-5" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, JK Rear 0"-2" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, JK Rear 0"-2" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep JK REAR with a 0 - 2" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, JK Front 6"+ Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, JK Front 6"+ Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep Wrangler JK FRONT with a 6"+ lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on...

    $1,399.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, JK Front 3"-5" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, JK Front 3"-5" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep JK FRONT with a 3-5" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.99
    Add to Cart
  • KING 2.5" Shocks, w/Clicker RES, JK Front 0"-2" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, JK Front 0"-2" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep JK FRONT with a 0 - 2" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.90
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • JK Elite Front Cross Member Assembly Here you can see how it welds into the JK frame. Here is how is mounts to the inside of the frame.

    GenRight

    Elite Front 3 Link Cross Member Kit, 2 or 4 door JK

    This is the Front cross member "kit" for the Jeep Wrangler JK from GenRight's Elite JK Suspension System. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your...

    $1,699.99
    Add to Cart
  • GenRight's JK Elite Coilover Suspension System Unmatched Articulation and Functionality Double Triangulated 4-Link Rear suspension Bind free 3-Link Front suspension Currie Front Axle with GenRight Hi-Steering

    GenRight

    JKU Elite Coilover Suspension System for 4 Door

    Been thinking about a coil over conversion for your Jeep Wrangler JKU? This is the GenRight Off Road ELITE Coil Over Long Arm & Long Travel Suspension "System" for the Jeep Wrangler JK 4 door (fits 2007 to 2018). This is The BEST Suspension you...

    $10,656.53
    Choose Options
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
    Add to Cart
  • Sale
    1-3/4" Daystar puck lift Shown here with 35" tires (using only the 1-3/4" puck lift and GenRight tube fenders)

    Daystar

    Daystar 1-3/4" Lift Kit for the Jeep Wrangler JK

    This is the Comfort Ride system from Daystar. It will raise the front & rear the JK Wrangler 1¾" for a level vehicle stance. It installs easily with no welding or drilling. It will maintain factory ride quality. The kit comes complete...

    $199.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

      This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air...

    $199.99
    Add to Cart
63 of 63 Items

© 2026 GenRight Offroad All rights reserved. | Sitemap