null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Suspension

If you're looking for the ultimate suspension for your Jeep, then you've come the right place. We have designed, developed, and innovated a suspension kit that sets a new standard when it comes to performance and funcionality.

 

57 of 57 Items
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $299.99
    Add to Cart
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $299.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge / Truss, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge/Truss, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • Sale
    1-3/4" Daystar puck lift Shown here with 35" tires (using only the 1-3/4" puck lift and GenRight tube fenders)

    Daystar

    Daystar 1-3/4" Lift Kit for the Jeep Wrangler JK

    This is the Comfort Ride system from Daystar. It will raise the front & rear the JK Wrangler 1¾" for a level vehicle stance. It installs easily with no welding or drilling. It will maintain factory ride quality. The kit comes complete...

    $199.99
    Add to Cart
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit for 3.5" axle tubes SUP-2002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit for 3.5" tubes

    This is the axle side, lower bump stop "pad" from GenRight Off Road. Specifically designed for the larger 3.5" axle tubes, like a 14 bolt. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with...

    $199.99
    Add to Cart
  • CE-9110T Johnny Joint Tool for Rebuilds Tool shown here compressing the joint to remove the retainer clip Rock Jock Johnny Joint Sizing Chart

    RockJock

    Tool for Rebuilding 2.5" Johnny Joint

    RockJock's Johnny Joint Tool is designed to make assembly OR disassembly of our 2-1/2 in. Johnny Joint Rod Ends simple! For Johnny Joint rebuilds and repairs, this tool can be used either in a bench vise, or it is compact enough that it may also be...

    $150.00
    Add to Cart
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • Here you can see the slight bends in the 1/4" thick wall CrMo tubing Jeep JK Frame Side Trac Bar from the GenRight Elite 3 Link Suspension kit 1/4" thick frame side mount fits the frame perfectly Shown here how it fits over the steering box frame sleeves. Double shear 9/16" Grade 8 Bolt

    GenRight

    JK Elite Frame Side Trac Bar Mount (2 or 4 Door)

     This is a Heavy Duty Frame Side Front Trac Bar Mount for the Jeep Wrangler JK, from GenRight Off Road.. It is part of our long travel GenRight Elite Coil Over Suspension System. These are the same parts included in our front 3 link kit and the...

    $124.99
    Add to Cart
  • GenRight's Needle Bearing Roller to protect your Tie Rod Needle Bearing Roller for your Tie Rod Installed on the front diff cover, prevents the tie rod from getting bent

    GenRight

    Needle Bearing Roller for Tie Rod

    Have you ever bent your tie rod? Well that is because it's so long and only supported on either end. This is a Roller Bearing which is mounted on the front diff cover and effectively shortens the length of the tie rod. Thereby supporting the tie rod...

    $99.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • CE-9110RK Rebuild Kit for 2.5" Johnny Joint As delivered CE-9110RK Rebuild Kit for 2.5" Johnny Joint Rock Jock Johnny Joint Sizing Chart Rebuild kit for the Johnny Joint CE-9114 that looks like this

    RockJock

    Rebuild Kit for 2.5" Johnny Joint

    This is a REBUILD KIT for a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie). This patented design has a special compound urethane cup(s) which absorbs the high impact loads from damaging suspension mounts. This is the same joint used on...

    $21.00
    Add to Cart
  • 4 High Quality GenRight ELITE Suspension Dome Stickers for your Jeep

    GenRight

    GenRight "ELITE" Suspension Dome Stickers

    This is (4) GenRight "ELITE" Suspension DOME stickers for your Jeep. These are the perfect size for your Jeep to show off your Elite Suspension system. High Quality. Chemical resistant. UV protected for long life and durability. Sold four (4) per...

    $10.00
    Add to Cart
57 of 57 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap