null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Jeep TJ 97-'06

GenRight engineers and builds world-class, rock-solid, ultra-tough off-roading components for Jeep Wranglers.  

 

We've been supporting Jeep Wrangler TJ since first opening our doors ten years ago and continue to offer the industry's most comprehensive lineup of serious off-roading accessories for TJ owners. 

 

These are not chain store parts and components.  Every GenRight product is developed to be a vast improvement over stock and well ahead of the competition.  We don't just drive Jeep Wranglers, we drive them hard, everywhere, all the time.  We also successfully race in Ultra4 and King of the Hammers, the toughest off-roading challenges since humanity landed on the moon.

 

GenRight also takes customer service very seriously. If you have a question, give us a call at (805) 584-8635, and we will be happy to assist you.

216 of 248 Items
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
  • GenRight's Hood Louver set Here is the typical mounting position for the 2 piece long hood louvers Typical mounting position for the 2 piece long hood louvers

    GenRight

    Hood Louver Set, 2pc Long - Black

    This is the GenRight Off Road 2 piece "long" hood louver set in black. This is a great way to vent that unwanted engine compartment heat and look good too! These louvers can be mounted in many different positions on the hood. Sold as a 2 piece set...

    $89.99
    Add to Cart
  • Hood Louver Set, 2pc Short - Black

    GenRight

    Hood Louver Set, 2pc Short - Black

    This is the Gen-Right Off Road 2 pc "short" hood louver set for any Jeep or other vehicle with a relativly flat hood.These are intended to be mounted in the rear position on the hood and are sold as a 2 piece set.This 2pc kit is: 2 short louvers,...

    $89.99
    Add to Cart
  • Steering box brace for the Jeep Wrangler TJ Close up of the clamp for the bottom of the steering box housing Shown here on a GenRight Tracer build

    GenRight

    Steering Box Brace, Jeep TJ (Saginaw box)

      This is a steering box brace for a Jeep Wrangler TJ or LJ Unlimited (with GenRight Tracer Kit installed). This brace ties your Saginaw type power steering box to the passenger frame rail to prevent it from being torn off due to added...

    $89.40
    Add to Cart
  • Long Fuel Pump Extension Kit Extended pump module vs stock height. Comparison to factory rods (on right)

    GenRight

    Factory Fuel Pump Extension Kit - Deep

    This is our longest extension kit that allows you to use your factory Jeep fuel pump module in a deeper GenRight gas tank.   This is done by extending the module to reach down to the bottom of the higher capacity GenRight fuel tank...

    $79.99
    Add to Cart
  • Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate Jeep TJ/LJ Steering Box Skid Plate

    GenRight

    Jeep TJ/LJ Steering Box Skid Plate

       This is the GenRight Steering Box Skid Plate to fit any '97-06' Jeep Wrangler TJ. Designed to protect the steering box and sector shaft from damage due to hitting obstacles on the trail. Features: Works with aftermarket front...

    $79.99
    Add to Cart
  • License Plate Relocation Mount Telescoping mount is fully adjustable The base slides onto your tire carrier, under your wheel Here you can see the base with the wheel on Mount the license plate to the male piece

    GenRight

    Telescoping License Plate Relocation Mount

    This is a universal License plate mount that cleanly relocates your rear license plate from the rear corner of the Jeep to the center of the spare tire.FEATURES: Made of sturdy steel tubing Fits 5 on 4.5 (TJ / YJ / XJ), 5 on 5 (JK), 5 on 5.5...

    $79.99
    Add to Cart
  • Twisted Pitman Arm Removal Tool, STK-2520 Tool threads into the internal threads cut into the pitman arm Tool being threaded into the pitman arm for removal from the steering box Be sure to cap off the internal threads from dirt and moisture!

    GenRight

    Twisted Pitman Arm Removal Tool

    This is the Removal Tool (or pitman arm puller) for all the GenRight Twisted Pitman Arms.FEATURES include: CNC machined from tool steel. Hex on the tool is same size (1-5/16") as nut holding the pitman arm on the steering box sector...

    $79.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 0 degree Lower Control Arm Brackets, BKT-3100 for 3.5" diameter axle tubes Shown here "tacked" into place in the proper rotation on the axle One piece design allows for more weld surface on the axle tube

    GenRight

    0 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 0 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for larger 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-2110 lower control arm 10 degree brackets for a 3.5" diameter axle tube. Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Made specifically to fit the larger 3.5" tube axles like a 14 Bolt or other aftermarket axle housings. Heavy Duty 1/4" thick is precision formed into shape so...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's Axle Side 20 degree Lower Control Arm Mount for 3.5" tubes One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets for 3.5" Tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically designed for the larger 3.5" diameter axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets for 3.5" tube

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Specifically made for 3.5" axle tubes, like a 14 bolt. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the...

    $69.99
    Add to Cart
  • Corner Guard Backing Plates for any GenRight Corners Shown here on the inside of an LJ tub to reinforce the side Corner Guard Backing Plate Shown here installed

    GenRight

    Corner Guard Backing Plates

    This is the CNR-7000, Corner Guard Backing Plates (pair) by GenRight Off Road. These are used to reinforce the top AND side mounting area of the Corner Guard on your Jeep. Simply put them on the inside of the tub, in place of the fender washers. They...

    $69.99
    Add to Cart
  • Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube. (Jack not included) Full kit parts, mounts, velcro strap, and hardware (U-bolts optional) Scissor Jack mod kit (Jack not included) Scissor Jack mod kit, weld on or bolt on (Jack not included) Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube (Jack not included)

    GenRight

    HD Scissor Jack Mod/Mounting Kit

    This is the GenRight Off Road manufactured Scissor Jack Kit. Why the Scissor Jack? It has a better range (compressed & extended) over a bottle jack or floor jack.  Where this matters is if you are running big tires and get a flat, as you...

    $69.99
    Choose Options
  • Sale
    GenRight's LED Stealth Side Marker Light Kit Here you can see how the side marker light hides under the top tube "stealth" like. Clean mounting of LED side marker lights Amber LED side marker lights on a Jeep TJ

    GenRight

    LED Stealth Marker & Blinker Light Kit, 4 light

      This is the GenRight Off Road 4 light Stealth Side Marker Light Kit. It includes the hard to find super bright amber colored LED's. It can be used as a front blinker & running light. GenRight has packaged this Stealth L.E.D...

    $60.00
    Add to Cart
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
    Add to Cart
  • 4 Bolt Formed Tube Clamp - 2" (Pair)

    GenRight

    4 Bolt Formed Tube Clamp - 2" (Pair)

    Another Genuine Ideas from GenRight!This is a simple formed tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack...

    $59.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height or...

    $59.99
    Add to Cart
  • GenRight Mini Boatside Rocker Guard Extensions

    GenRight

    GenRight Mini Boatside Rocker Guard Extensions

    This is a 24" piece of material the same shape and thickness as our Mini Boat Side, 6" tall Rocker Guards. This DIY piece of metal can be cut and shaped by the installer and welded on to the existing rocker guards after stretching the wheelbase...

    $59.99
    Add to Cart
  • Hood Louver Long Front Only Hood Louver Long Front Only

    GenRight

    Hood Louver Long Front Only - Black

    This is the GenRight Off Road "long" FRONT hood louver set in BLACK powder coated finish.Works great on a Jeep TJ, LJ or YJ.This configuration offers great cooling for your engine compartment!The louver can be mounted on front portion of the...

    $59.99
    Add to Cart
  • Cross member backing plate, RBB-1007

    GenRight

    Inner Reinforcement Plates, TJ / YJ

      This is the Inner Plate to reinforce the inside of the rear cross member and picks up the middle 6 bolts to beef up the rear cross member. This plate is also 3/16" thick steel, just like the rear bumper plate (RBB-1000). It is designed to...

    $59.99
    Add to Cart
  • Transmission Tunnel Cover Plate for Jeep TJ & LJ Pictured here is the installed floor plate after Rhino lining

    GenRight

    Transmission Tunnel Cover Plate for Jeep TJ & LJ

    This is a Transmission Tunnel Cover Plate from GenRight Off Road. It covers the hole in the floor board when the factory transmission and transfer case shifter are removed. It's a perfect upgrade for anyone who is switching to a V8 engine with an...

    $59.99
    Add to Cart
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GenRight Standard Rocker Guard Extensions

    GenRight

    GenRight Standard Rocker Guard Extensions

    This is a 24" piece of material the same "L" shape and thickness as our Standard 6" tall Rocker Guards. This DIY piece of metal can be cut and shaped by the installer and welded on to the existing rocker guards after stretching the wheelbase. Perfect...

    $49.99
    Add to Cart
  • Jeep Wrangler TJ or LJ A-pillar light mounts Lower windshield light mounts for the Jeep TJ or LJ A pillar or Windshield light mounts for the Jeep TJ or LJ

    GenRight

    Jeep TJ/LJ A-Pillar LED Light Mount (Pair)

    These are mounts to add the lights of your choice to the windshield or A-Pillar of your Jeep Wrangler TJ or LJ (1997 to 2006). FEATURES: Easy to mount through using existing holes (no drilling) Allow you to run the lights of your choice. Laser cut...

    $49.99
    Add to Cart
  • Universal LED License Plate Light w/ Brake Light LED 3rd brake light on at night Here you can see the LED license plate light and 3rd brake light on at night Close up view of how this compact LED light looks and mounts. LED1650 license plate light with 3rd brake light.

    GenRight

    LED License Plate Light w/Long Harness

    This is a universal LED License light that cleanly mounts behind your rear license plate (that is necessary to be legal on the street). Designed to be used when running LED tail lights which eliminate the normal license plate light (off the...

    $49.99
    Add to Cart
  • Perforated side panels for the GenRight Tube Fenders Helps to remove the under hood heat!

    GenRight

    Perforated, G3 Side Panel STD or HI, Pair

      This is the PERFORATED removable panel for the GenRight Tube Fenders. This is an upgraded from the standard "plain" side panel that comes with every one of our G3 Tube Fenders.FEATURES: Perforated holes vent unwanted head from the engine...

    $49.99
    Add to Cart
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
    Add to Cart
216 of 248 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap