null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Hardware

87 of 87 Items
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • Johnny Joint, PRESS IN for Upper Link on Axle

    RockJock

    Johnny Joint, PRESS IN for Upper Link on Axle

     This is the specially machined Johnny Joint® rod end out of the Currie CE-9102K front end housing kit. This joint's outer shell is machined to a 1.795" outer diameter with a flanged edge and is designed to be PRESSED into the...

    $73.00
    Add to Cart
  • Steering, misalignment spacers

    GenRight

    Hi-Misalignment spacer (Pair) 3/4 to 5/8

    This is a hi-misalignment spacer for a Heim joint. This part number reduces the bore from 3/4" to 5/8" diameter to fit in our Drag Link Correction Kit. This is the exact same part we run on the drag link (in a LH & RH) of all the GenRight...

    $24.99
    Add to Cart
  • Steering, misalignment, spacers

    GenRight

    Hi-Misalignment spacer (Pair) 1" to 9/16"

    This is a hi-misalignment spacer for the big "16" size Heim joint. This part number reduces the bore from 1" to 9/16" diameter to fit in our suspension brackets. This is the necessary part to adapt the big FK heim to fit in...

    $24.99
    Add to Cart
  • Steering, misalignment, spacers

    GenRight

    Hi-Misalignment spacer (Pair) 1" to 5/8"

    This is a hi-misalignment spacer for the big "16" size Heim joint. This part number reduces the bore from 1" to 5/8" diameter to fit in our suspension brackets. This is the necessary part to adapt the big FK heim to fit in...

    $24.99
    Add to Cart
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
    Add to Cart
  • Sale
    RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
    Choose Options
  • Sale
    JMXL16T Super Heavy Duty 1-1/4" -12 FK Rod End

    FK Rod Ends

    1-1/4"-12 FK Heim Rod End (Choose Thread)

    This is a genuine FK Heim, it is the only thing we will use on our Jeeps and off-road racers. These are American Made and fully CrMo (aircraft grade) 1-1/4" shank with 12TPI and 1" bore (through the ball). The amount of rotation in...

    $89.99
    Choose Options
  • Sale
    Brake line mounting tabs (Pair) BKT-1250 GenRight Brake line mounting tab

    GenRight

    Brake Line Tabs (Pair)

    This is a top quality "straight" mounting tab from GenRight Off Road. They are Laser cut from Heavy Duty 1/8" thick plate steel.Size: 1" x 1-5/8" long.They are perfect for mounting brake lines or other things on your Jeep. 3/8"...

    $3.99
    Add to Cart
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

    This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were still...

    $179.99 - $189.99
    Choose Options
  • 4 Bolt Formed Tube Clamp - 2" (Pair)

    GenRight

    4 Bolt Formed Tube Clamp - 2" (Pair)

    Another Genuine Ideas from GenRight!This is a simple formed tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack...

    $59.99
    Add to Cart
  • 4 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    GenRight

    4 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    Another Genuine Ideas from GenRight!This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We...

    $59.99
    Add to Cart
  • 2 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    GenRight

    2 Bolt Formed Tube Clamp - 1-1/2" (Pair)

    This is a simple tube clamp that you can use to mount all kinds of accessories in/on your Jeep. You can drill it, tap it or weld to it to mount everything from a fire extinguisher to a roof rack.We offer this clamp in a 2 bolt or 4 bolt...

    $49.99
    Add to Cart
87 of 87 Items

© 2026 GenRight Offroad All rights reserved. | Sitemap