null

MADE IN THE USA

phone: (805) 584-8635

Universal & DIY

108 of 270 Items
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
    Add to Cart
  • Jeep YJ Laser Cut Aluminum Dash w/ Switch Panel Shown installed in the legendary GenRight Growler YJ (Center Console not included) Aluminum flat dash for the Jeep YJ with Holley display and MIL Spec switches View of the YJ dash in the Growler from the drivers side.

    GenRight

    Jeep YJ Laser Cut Aluminum Dash w/ Switch Panel

      This is the GenRight aluminum dash for the Jeep YJ. Customize your Jeep YJ with GenRight's Laser Cut Aluminum Dash w/center switch panel section and master power switch. This is the same dash that was in the legendary GenRight Growler for years...

    $449.99
    Choose Options
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded 4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
    Add to Cart
  • GenRight's Rear Axle Bridge, 14 Bolt, Welded Rear Axle Bridge, 14 Bolt on rear axle 14 Bolt Rear Axle Bridge on the axle. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $449.99
    Add to Cart
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
    Add to Cart
  • Universal Bolt in Spare Tire & Wheel Mount Universal Spare Tire & Wheel Mount Installed in the back of a UTV.

    GenRight

    Universal Bolt in Spare Tire & Wheel Mount

    This is a heavy duty Universal Bolt on Spare Tire & Wheel Mount from GenRight Off Road. Build from 3/16" cold rolled steel plate it is strong. It has a T-handle on a large acme thread that allows you to quickly load and unload a spare tire/wheel...

    $449.99
    Add to Cart
  • GenRight's mounting kit for the custom Griffin Radiator JK V8 radiator Shown here mounted in the GenRight Terremoto Jeep JK Shown here mounted in the GenRight Terremoto Jeep JK with LS Shown here stuffed into the factory core support (must be modified)

    GenRight

    JK Elite Aluminum Radiator Mounts for LS Engine

    This is a custom designed mount (like the one we are running in the Terremoto Jeep JK) to hold the GenRight spec Griffin Aluminum radiator. We take out all the guess work and provide you everything you need to swap over to a super efficient aluminum...

    $429.99
    Add to Cart
  • GenRight radiator mounting kit for the Ron Davis radiator for LS V8 GenRight radiator mounting kit for the Ron Davis radiator for LS V8

    GenRight

    LJ Tracer Aluminum Radiator Mounts for LS Engine

    This is the GenRight radiator mounting kit for the Ron Davis radiator we have made for our Tracer builds. It is designed to work with a GenRight LJ TRACER build running a Chevy LS V8. Sold as an option/upgrade to the Tracer kit. This mount is...

    $399.99
    Add to Cart
  • GenRight's Rear Axle Bridge, Dana 60, Welded Rear Axle Bridge, Dana 60, installed in a Stretched Jeep Rear Axle Bridge, Dana 60 with triangulated upper links Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60, Welded

    This is GenRight's Dana 60 low profile Rear Axle Bridge that is also designed to be an axle truss too! If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential...

    $399.99
    Add to Cart
  • GenRight Off Road's Stanchion kit for the '97 - 06 Jeep Wrangler TJ or LJ. Here you can see how the stanchion fits when installed. Here you can see the stanchions on a fully welded cage out of the vehicle.

    GenRight

    TJ / LJ Cage Stanchions

    PRICE REDUCTION! Building your own cage?Then the GenRight Stanchion or Leg at the dash for the Jeep TJ / LJ is for you. They are designed to fit tight to the dash and maximize leg room.It is laser cut from heavy 3/16" thick steel plate and CNC formed...

    $399.99
    Add to Cart
  • GenRight's Outboard Rear Shock Mount Kit Close up of JIG welded lower shock mounts, included in this kit. TJ/LJ/YJ/CJ Universal Outboard Rear Shock Mount Kit (Shocks not included) Lower shock mount installs on the back side of the rear axle tube. Outboard Rear Shock Mount Kit Mid-Install (Bump Cans not Included)

    GenRight

    Universal Outboard Rear Shock Mount Kit

    The GenRight outboard rear shock mount kit for the Jeep TJ, LJ, YJ or CJ-7 was designed to accept 2.0" coil over shocks. It is a perfect way to convert your rig to Coilover shocks! The clean and simple design which "frenches"...

    $399.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • Griffin 12" x 12" universal fluid cooler Installed as Transmission cooler for GenRight Terremoto JK

    Griffin

    Griffin Universal Fluid Cooler, Small

      This is the newest style Heavy Duty "small" Griffin Aluminum Universal Fluid Cooler for use as a transmission or oil cooler.FEATURES: Compact 12.5" x 12.1" x 6.5" thick (including the cooler w/fan) size! Rugged...

    $369.00
    Add to Cart
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • GenRight's Hi-Steer Arm for the Elite Suspension Here is the arm on the Currie knuckle with heim steering Here you can see the hi-steer arm on the Currie axle and knuckle.

    GenRight

    Hi-Steer Arm for Currie RockJock Knuckle

    This is the GenRight modified Currie Hi-Steer arm. It has been modified to have the correct geometry to work with the GenRight JK Elite Suspension System. It positions the drag link in the proper location to match the pitman arm length so you can...

    $349.99
    Add to Cart
  • Red Rock Tools Trail Ready JK Jeep Tool Kit

    Red Rock Tools

    Red Rock Tools Trail Ready JK/JKU Jeep Tool Kit

      The JK Tool Kit Includes the following: 21mm 3/8 drive Socket 15mm wrench 15mm 3/8 drive socket 19mm 3/8 drive socket 36mm 1/2 drive socket 13mm 12 point 3/8 drive socket 8mm wrench 3/8 drive ratchet 3/8 drive 3" extension 3/8 drive...

    $349.99
    Add to Cart
  • Red Rock Tools Trail Ready JL/JT Jeep Tool Kit

    Red Rock Tools

    Red Rock Tools Trail Ready JL/JT Jeep Tool Kit

    The Trail Ready Jeep JL/JT Tool Kit Includes: 21mm 3/8 drive socket 15mm wrench 15mm 3/8 drive socket 19mm 3/8 drive socket 36mm 1/2 drive socket 13mm 12 point 3/8 drive socket 18mm 3/8 drive socket 24mm 1/2 drive socket 22mm 1/2 drive...

    $349.99
    Add to Cart
  • Universal Spare Tire & Wheel Mount. The urethane isolator holds a variety of wheel sizes. Here you can see how it clamps the wheel into place.

    GenRight

    Universal Spare Tire & Wheel Mount

    This is a top quality universal spare tire mounting assembly from GenRight Off Road. It has a heavy duty 1" ACME threaded rod and giant T-handle nut are perfect to hold a spare tire in an off-road vehicle. The mounting bracket has (6) 1/4-20 Grade 8...

    $349.99
    Add to Cart
  • Viair 450P Automatic Portable Air Compressor package

    VIAIR

    Viair 450P-Auto Portable Air Compressor

    This is the Viair 450P-Automatic offers an automatic shut-off function in a larger portable compressor (than the Viair 400P). This 100% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before...

    $349.99
    Add to Cart
  • 1" Vent Hose Kit for Off-Road Racing Fuel Cell 1" vent hose kit at the high point 1" vent hose kit off the fuel cell (smaller blue hose)

    GenRight

    1" Vent Hose Kit for Off-Road Racing Fuel Cell

    This is a 1" diameter vent kit for the GenRight Race legal Fuel Cell. This is the same thing we use on the GenRight Terremoto Jeep JK. Designed to be low profile and take the minimal amount of space away from the cargo area. Enough tubing supplied in...

    $299.99
    Add to Cart
  • Sale
    GenRight Off Road's Jeep CJ-7 Cage Stanchion kit Here you can see the laser cut and formed stanchion fits the dash like a glove. Here you can see how this stanchion fits tight to the tub for access to parking brake. Here you can see entire assembly outside the Jeep.

    GenRight

    CJ Cage Stanchions

    PRICE REDUCTION! Building your own cage? This is the GenRight Cage Stanchion Kit for your Jeep CJ-5 or CJ-7. It was carefully designed for maximum foot room to make it easier to get in and out of a cage that goes to the floor. This "A"...

    $449.99
    $299.99
    Add to Cart
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed in the Jeep!

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • JK Elite front bump can mounts Here you can see the front bump can welded in place next to the shock tower

    GenRight

    JK Elite Front Bump Can Kit (Pair), 2 and 4 door

     This is the GenRight Front Bump Stop kit for the front JK Elite Suspension System. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump...

    $299.99
    Add to Cart
  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $299.99
    Add to Cart
  • Genright's Rear Axle Bridge, 14 Bolt, Un-welded 14 Bolt Axle Bridge on rear axle housing. Rear Axle Bridge over the housing. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, 14 Bolt, Un-welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $299.99
    Add to Cart
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • GenRight Off Road's Jeep YJ Stanchion kit. Semi assembled YJ stanchion. Here you can see how the GenRight stanchion fits tight to the tub. Here you can see how the stanchion fits with a factory half door and dash.

    GenRight

    YJ Cage Stanchions

      PRICE REDUCTION! Building your own cage?Then the GenRight Stanchion or Leg at the dash for the Jeep YJ is for you. It is designed to fit tight to the dash and maximize leg room.This kit is a complicated series of brackets that are...

    $299.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
    Add to Cart
108 of 270 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap