null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

Universal & DIY

252 of 279 Items
  • Weld-on Currie Johnny Joint, CE-9110CP w/grease fitting on barrel Here you can see the Johnny Joint TIG welded onto a GenRight trac bar Here you can see the Johnny Joint on the frame side of a GenRight trac bar Here you can see the Johnny Joint on a GenRight trac bar Here you can see the Johnny Joint on the frame side of a GenRight trac bar

    RockJock

    Johnny Joint, WELD-ON

    This is a weld-on type genuine Rock Jock Johnny Joint (by John Currie) for trac bars or suspension control arms. This joint consists of a 2 ½” O.D. x .180” wall chromoly outer barrel. Interlocking urethane bushings that encase...

    $64.99
    Add to Cart
  • Genuine Rock Jock (Currie) Johnny Joint CE-9114 with 1-1/4"-12 shank How it works: special compound urethane, sintered metal ball, washers and clip Johnny Joints on both ends of GenRight 7075 aluminum control arms Johnny used on an upper control arm of a suspension Johnny Joints on double triangulated rear suspension

    RockJock

    Johnny Joint, 1-1/4 Shank by Rock Jock

    This is a genuine 2-1/2" Rock Jock Johnny Joint (by John Currie) with a 1-1/4-12 threaded shank for suspension control arms. A Johnny Joint is a suspension end designed to smoothly rotate up to 30 degrees without binding (or degrading...

    $66.00
    Choose Options
  • Johnny Joint, PRESS IN for Upper Link on Axle

    RockJock

    Johnny Joint, PRESS IN for Upper Link on Axle

     This is the specially machined Johnny Joint® rod end out of the Currie CE-9102K front end housing kit. This joint's outer shell is machined to a 1.795" outer diameter with a flanged edge and is designed to be PRESSED into the...

    $73.00
    Add to Cart
  • JK Elite Front Cross Member Assembly Here you can see how it welds into the JK frame. Here is how is mounts to the inside of the frame.

    GenRight

    Elite Front 3 Link Cross Member Kit, 2 or 4 door JK

    This is the Front cross member kit for the Jeep Wrangler JK from GenRight's Elite JK Suspension System. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $1,699.99
    Add to Cart
  • Steering, misalignment spacers

    GenRight

    Hi-Misalignment spacer (Pair) 3/4 to 5/8

    This is a hi-misalignment spacer for a Heim joint. This part number reduces the bore from 3/4" to 5/8" diameter to fit in our Drag Link Correction Kit. This is the exact same part we run on the drag link (in a LH & RH) of all the GenRight...

    $24.99
    Add to Cart
  • Steering, misalignment, spacers

    GenRight

    Hi-Misalignment spacer (Pair) 1" to 9/16"

    This is a hi-misalignment spacer for the big "16" size Heim joint. This part number reduces the bore from 1" to 9/16" diameter to fit in our suspension brackets. This is the necessary part to adapt the big FK heim to fit in...

    $24.99
    Add to Cart
  • Steering, misalignment, spacers

    GenRight

    Hi-Misalignment spacer (Pair) 1" to 5/8"

    This is a hi-misalignment spacer for the big "16" size Heim joint. This part number reduces the bore from 1" to 5/8" diameter to fit in our suspension brackets. This is the necessary part to adapt the big FK heim to fit in...

    $24.99
    Add to Cart
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
    Add to Cart
  • Sale
    RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
    Choose Options
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

      This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the...

    $549.99
    Add to Cart
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • Teraflex Hand Throttle Kit Contents This is the typical hand throttle installation on gear shift Hand Throttle for stick shift Jeeps Hand Throttle mounted in a Jeep Wrangler YJ Closer look at mounting for the hand throttle

    Teraflex

    Hand Throttle

    This is a Hand Throttle. It is a simple lever that is mounted to the shifter of a manual transmission. It is the single best product any 4 wheeler with a stick shift (manual) transmission can buy!1) It allows the driver to apply the throttle with...

    $52.99
    Add to Cart
  • Large 3/16" Thick Corner Gusset (Pair)

    GenRight

    Large 3/16" Thick Corner Gusset (Pair)

    This is a "large" Corner Gusset from GenRight Off Road. They are Laser cut from Heavy Duty 3/16" thick plate steel. They are perfect for welding into corners where you need more support.Designed with a "relief" in the gusset to go over a...

    $14.99
    Add to Cart
  • 1/4" Thick Extra Long Gussets (Pair) Gussets shown here on either side of the GenRight rear shock tower Gussets shown here on either side of the GenRight rear shock tower RMS-5513-P Extra Long Gussets (Pair) are 1/4" thick Shown here on the GenRight Growler YJ

    GenRight

    1/4" Thick Extra Long Gusset (Pair)

    This is an optional (but highly recommended) gusset for each side of shock tower from GenRight Off Road. This is the same gusset used on every GenRight Jeep build. They are Laser cut from Heavy Duty 1/4" thick plate steel. They are perfect for...

    $19.99
    Add to Cart
  • Griffin 12" x 12" universal fluid cooler Installed as Transmission cooler for GenRight Terremoto JK

    Griffin

    Griffin Universal Fluid Cooler, Small

      This is the newest style Heavy Duty "small" Griffin Aluminum Universal Fluid Cooler for use as a transmission or oil cooler.FEATURES: Compact 12.5" x 12.1" x 6.5" thick (including the cooler w/fan) size! Rugged...

    $413.00
    Add to Cart
  • Griffin 19.75 x 13" universal fluid cooler We use this larger cooler on the front of our 4500 car for cooling our transmission.

    Griffin

    Griffin Universal Fluid Cooler, Large

      This is the Heavy Duty "large" Griffin Aluminum Universal Fluid Cooler. Can be used for engine oil, transmission fluid or power steering fluid cooling.FEATURES: Overall size is 19.75" x 13" x 6.5" thick (includes cooler and fan). Actual...

    $557.00
    Add to Cart
  • Griffin Heavy Duty Jeep Radiator with fan, shroud and accessories, 1987 - 2006 Side view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006 Front view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006

    Griffin

    Griffin Jeep TJ/LJ/YJ Radiator w/Fan

      This is the top of the line a direct fit American made Griffin Aluminum Radiator for the Jeep Wrangler TJ / LJ / YJ. This is part of Griffin's new MaxCool package where they take out all the guess work and provide you everything you need to...

    $1,160.00
    Add to Cart
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
    Add to Cart
  • Sale
    JMXL16T Super Heavy Duty 1-1/4" -12 FK Rod End

    FK Rod Ends

    1-1/4"-12 FK Heim Rod End (Choose Thread)

    This is a genuine FK Heim, it is the only thing we will use on our Jeeps and off-road racers. These are American Made and fully CrMo (aircraft grade) 1-1/4" shank with 12TPI and 1" bore (through the ball). The amount of rotation in...

    $89.99
    Choose Options
  • 1/4" Thick Extra Large Corner Gusset (Pair)

    GenRight

    1/4" Thick Extra Large Corner Gusset (Pair)

    This is a Extra Large Corner Gusset from GenRight Off Road. It is Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for any area you want to reinforce or dress up. In a cage this type of gusset can serve as a functional way to hook...

    $19.99
    Add to Cart
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

      This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to...

    $599.99
    Add to Cart
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
    Add to Cart
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
    Add to Cart
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
    Add to Cart
  • .250" think wall DOM material is perfect for lower links

    GenRight

    DOM Tubing, 2.00" x .250" wall x 36"

    This is 2" diameter x .250" thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Long Travel Suspension kits. Perfect for lower control arms. You cut to the length you need. If you want to carry a spare, cut yours...

    $119.99
    Add to Cart
  • 1-3/4" DOM tubing is perfect for upper links

    GenRight

    DOM Tubing, 1.75" x .120" wall x 36"

      This is 1.75" diameter x .120" thick wall x 3' D.O.M. seamless tubing.Great for use on upper control arms.Same thing we use for the upper links on all our GenRight Suspension kits.FEATURES: 1-3/4" O.D. (Outer Diameter) Hi strength Drawn...

    $69.99
    Add to Cart
  • GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Rear View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Front View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Basic dimensions so you can verify it will fit your application

    GenRight

    Dana 44 Rear Axle Bridge - Unwelded

    This is a weld-on REAR Axle Bridge for the factory Jeep JK  or JKU Dana 44 rear axle from GenRight Off Road. If you Triangulating (or linking) your Jeep's rear suspension, you will need a "Bridge" (or truss) like this on the rear axle...

    $169.99
    Add to Cart
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
    Add to Cart
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
    Choose Options
  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

      This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle...

    $999.99 - $1,029.98
    Choose Options
252 of 279 Items

© 2025 GenRight Offroad All rights reserved. | Sitemap