null

MADE IN THE USA

  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

      This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle...

    $999.99 - $1,029.98
  • GenRight Aluminum Dash for the Jeep Wrangler TJ & LJ Defroster vents cut into top of dash Good look at GenRight dash and center console in a Jeep Wrangler TJ. Front edge is covered in case you don't run a windshield. Shown here with Holley Display and iPad Mini.

    GenRight

    Jeep TJ & LJ Laser Cut Aluminum Dash

    This is the GenRight aluminum dash kit for the Jeep Wrangler TJ & LJ. Customize your Jeep TJ or LJ with GenRight's Laser Cut Aluminum Dash.This dash is ideal for the builder who is modifying the interior and moving to a custom look and ultra...

    $999.99
  • GenRight Aluminum Dash for the Jeep YJ Defroster vents cut into top of dash YJ Dash installed with optional center console and equipment installed Exploded view of YJ Dash parts (Hardware is included)

    GenRight

    Jeep YJ Laser Cut Aluminum Dash

    This is the GenRight aluminum dash for the Jeep YJ. Customize your Jeep YJ with GenRight's Laser Cut Aluminum Dash.This is the same dash Jami is using in the legendary GenRight Growler YJ.This dash is ideal for the builder who is modifying the...

    $999.99
  • Rear view of the Griffin Heavy Duty Aluminum Jeep Radiator 1987 - 2006 Front view of the Griffin Heavy Duty Jeep Radiator 1987 - 2006

    Griffin

    Griffin Jeep TJ/LJ/YJ Aluminum Radiator Only

    This is the top of the line American made Griffin Aluminum Radiator for the Jeep Wrangler TJ / LJ / YJ. This is Griffin's super efficient aluminum radiator that bolts into your Jeep grille to work with your factory shroud and...

    $950.00
  • GenRight Billet twisted pitman arm Heat Treated Chromoly provides incredible strength and durability. GenRight Billet twisted pitman arm Arm is twisted for optimal geometry GenRight Billet twisted pitman arm

    GenRight

    Billet Chromoly Twisted Pitman Arm

    This is the new and innovative GenRight Billet Twisted Pitman Arm that allows for 3.5" more up travel. This arm was designed as part of our new low ride height TRACER Suspension system for the Jeep LJ. It corrects the angle issues inherent in...

    $899.99
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
  • GenRight's LS Engine and 4L80 Transmission Mounting kit for the Jeep JK Engine mounting kit for the Jeep JK includes fixture pieces to space engine mounts properly 100% designed in CAD to fit the Chevy LS engine and JK Frame with Elite Suspension This is where it mounts on the back of front cross member How the 4L80 Trans mount assembly looks

    GenRight

    JK Elite LS Engine and 4L80 Transmission Mounts

    This is the GenRight LS Engine and 4L80 Transmission Mounts for the GenRight Off Road JK Elite Suspension. These are the same designed parts we use on the GenRight Terremoto Jeep Wrangler JKU as part of the GenRight Elite Suspension System. Perfected...

    $799.99
  • Rock or Road Tire Inflation System Built in digital display is Bluetooth connected to your phone Plug and play installation with ARB Dual compressor Installed on a Jeep JL with quick disconnect air hoses to each wheel Keeps hoses out of the dirt

    Made for Rocks

    Rock or Road Air Tire Inflation System for Jeep JK & JKU

    This is the Rock or Road tire inflation/deflation system by the Made for Rocks company. This system inflates and/or deflates all 4 tires simultaneously to the pressure of your choice. It is compact and mounts on your Jeep, under the two front seats...

    $799.99
  • SKP-2600 Engine Skid Builders Kit GenRight's Engine Skid kit protects the engine and transmission GenRight's Engine Skid kit installed on a Jeep Our engine skid is proven at KOJ by 4600 Class winners!

    GenRight

    Engine/Transmission Skid Plate Kit

    This is the GenRight Engine Skid Plate Kit for a Jeep. It is a universal kit, and was designed to work with our 3 Link front suspension (but might work with other kits). It is a tube frame with a 1/4" thick aluminum plate that is used to protect the...

    $599.99
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
  • JK Elite Front Axle Bracket Kit for RockJock 60 Lower link mount, shock mount, and limit strap mount

    GenRight

    Front Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $549.99
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

      This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the...

    $549.99
  • Griffin 19.75 x 13" universal fluid cooler We use this larger cooler on the front of our 4500 car for cooling our transmission.

    Griffin

    Griffin Universal Fluid Cooler, Large

      This is the Heavy Duty "large" Griffin Aluminum Universal Fluid Cooler. Can be used for engine oil, transmission fluid or power steering fluid cooling.FEATURES: Overall size is 19.75" x 13" x 6.5" thick (includes cooler and fan). Actual...

    $500.00
  • GenRight Elite Suspension Front upper link mount for Dynatrac XD60 front axle Fits into the JK with GenRight Elite kit like a glove!

    GenRight

    3 Link Bridge for Dynatrac Pro Rock XD60

    This is the GenRight Elite Suspension FRONT Bridge (upper link mount) for a Dynatrac Pro Rock XD 60. The mounts were designed as part of the GenRight Elite 3 Link front Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
  • GenRight Elite Suspension Rear  upper link mount for Dynatrac ProRock 80 rear axle GenRight's rear bridge on Pro Rock 80 rear axle

    GenRight

    4 Link Rear Bridge for Dynatrac Pro Rock 80

    This is the GenRight Elite Suspension REAR Bridge (upper link mount) for a Dynatrac Pro Rock 80. The mounts were designed as part of the GenRight Elite 4 Link rear Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
  • Twisted pitman arm and the twisted mount for the hi-steer arm. Closeup of the mount on a hi-steer arm Here you can see how both are twisted to improve range of motion Includes a plastic cap to protect the internal threads on the pitman arm

    GenRight

    Twisted Pitman & Hi-Steer Mount

    This is the GenRight Twisted Pitman Arm and Hi-Steer Arm Mount for drag links with heims on both ends. It includes our Twisted Pitman Arm and our Hi-Steer Arm Mount kit to correct the angle issues inherent in long travel front...

    $499.99
  •  LS Engine Accessory Bracket Mounting Kit Shown here installed on an LS3 in a Jeep LJ Shown here installed on an LS3 with remote steering res above the pump LS Engine Accessory Bracket Mounting Kit Here you can see how we capture the power steering pump onto the LS head

    GenRight

    LS Engine Accessory Bracket Mounting Kit

    This is the GenRight LS Engine accessory mounting bracket kit for your off road Jeep Wrangler. These beefy laser cut brackets move the engine accessories up out of the way. It mounts the GM alternator, PSC power steering pump and reservoir (as...

    $489.99
  • Drivers Side Currie 1 Ton Knuckle (Left). Drivers Side Currie 1 Ton Knuckle (Left) on axle housing with optional hi-steer arm.

    Currie Ent

    Currie 1 Ton Knuckle, Drivers Side

    This is Currie modified 1 Ton Knuckle DRIVERS side. Machined for the Currie Hi-Steer arm (CE-60-10001L). Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60 or 70 front axle purchased...

    $479.99
  • Drivers Side Currie 1 Ton Knuckle (Right). Drivers Side Currie 1 Ton Knuckle (Right) on axle housing with optional hi-steer arm.

    Currie Ent

    Currie 1 Ton Knuckle, Passenger Side

    This is Currie modified 1 Ton Knuckle for the PASSANGER side (or Right side) of a front axle. Machined for the Currie Hi-Steer arm (CE-60-10001R). Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie...

    $479.99
  • Currie Full Float Rear Axle Hub, 5 on 5.5 and 1/2" studs Includes new bearing races.

    Currie Ent

    Currie Full Float Rear Hub 5 on 5.5 with 1/2" Studs

    This is Currie Full Float Rear Axle Hub. Fits either drivers or passenger sides. 5 on 5.5" Bolt Pattern. 1/2" Diameter Wheel Studs. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60...

    $474.99
  • Currie Full Float Rear Axle Hub, 5 on 5.5 and 5/8" studs Includes new bearing races.

    Currie Ent

    Currie Full Float Rear Hub 5 on 5.5 with 5/8" Studs

    This is Currie Full Float Rear Axle Hub. 5 on 5.5" Bolt Pattern. 5/8" diameter Wheel Studs. Fits either drivers or passenger sides. Designed to work with the GenRight JK Elite, Tracer or Legend Suspension Systems. Fits all Currie Rock Jock 60...

    $474.99
  • Reverse Twisted Pitman Arm GenRight's Reverse Twisted Pitman Arm, STK-2540
Shown here on a JK steering box in the GenRight 4500 car

    GenRight

    Reverse Double Shear Pitman Arm

    This is the innovative GenRight Reverse Twisted Pitman Arm to correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). This same pitman arm we used in Jordan's 4585 MOD Class racer with a JK...

    $469.99