null

MADE IN THE USA

phone: (805) 584-8635

Jeep LJ 04-'06

72 of 329 Items
  • SSV MRB3 Dash Mount Plate SSV MRB3 Dash Mount Plate, Rear View

    GenRight

    GenRight SSV MRB3 Dash Mount Kit

    This GenRight Off Road manufactured mount allows you to mount your SSV Works MRB3 Audio System (display and amp) in a clean manner and in a compact area. FEATURES: Mounts into factory radio opening in the dash of a Jeep TJ or LJ. Made from .080...

    $39.99
    Choose Options
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • RBB-1100 GenRight's rear bumper to frame tie in kit RBB-1100 installed on a Jeep to reinforce rear cross member/bumper mounts

    GenRight

    Rear Frame to Bumper Tie-In Bracket Kit

    This is the GenRight Rear Frame to Bumper Bracket kit for anyone who wants to beef up the way the rear bumper and cross member tie in the the rear section of the frame. We recently added a gusset to the bracket in order to further reinforce the...

    $99.99
    Add to Cart
  • Transmission Tunnel Cover Plate for Jeep TJ & LJ Pictured here is the installed floor plate after Rhino lining

    GenRight

    Transmission Tunnel Cover Plate for Jeep TJ & LJ

    This is a Transmission Tunnel Cover Plate from GenRight Off Road. It covers the hole in the floor board when the factory transmission and transfer case shifter are removed. It's a perfect upgrade for anyone who is switching to a V8 engine with an...

    $59.99
    Add to Cart
  • GenRight 3 piece long hood louver set in black Proper hood placement How the underside of the hood looks after mounting Installed on a Jeep Liberty

    GenRight

    Hood Louver Set, 3pc Long - Black

      This is the GenRight Off Road 3pc "long" hood louver set.Works great on Jeep TJ, LJ or YJ.They can be mounted in many different positions on the hood and are sold as a 3 piece set.This 3pc kit is: (1) Front louver has louvers in traditional...

    $99.99
    Add to Cart
  • Aluminum Gas Cap and Filler Kit (Jeep YJ/CJ Pictured) Typical install on a stretched TJ, YJ ot CJ Still easy to access for filling, but recessed so it does not hit the tire Aluminum Gas Cap and Filler Kit (Jeep TJ/LJ '97-'02 Pictured) Kunrled cap for grip, sealed with a premium o-ring to keep dirt out

    GenRight

    Aluminum Gas Cap & Filler Kit w/ Vent

    This is the GenRight Billet Aluminum Gas Cap & Filler assembly. It's compact design solves a problem for stretched Jeeps with big tires! It is mounted above the frame inside the rear inner fender well (as pictured). The entire assembly is...

    $299.99
    Choose Options
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
    Add to Cart
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GenRight's Hi Lift Jack Mounts Here you can see customer mounted the jack to the outside Another view of the clamps holding the jack onto the tube

    GenRight

    Hi Lift Jack Tube Mounts, 1-3/4"

    This a pair of tube clamps with a threaded 3/8" stud. Primarily used to mount a Hi-Lift jack on the tubes of our Jeep rear tire carriers, front bumper or roll cages. This a super clean way to mount accessories on any 1-3/4" diameter...

    $109.99
    Add to Cart
  • Sale
    Rear Support for an Atlas Transfer Case Support Ring on our BKT-1050 cross member kit. Here you can see the support ring installed Holding the rear of the T-case with our double triangulated 4 link rear suspension Holding the rear of the T-case with our double triangulated 4 link rear suspension

    GenRight

    Atlas Transfer Case Support Ring Kit

    This is the GenRight Atlas transfer case rear support. We run this on all our GenRight Jeeps and Ultra4 off-road race cars. Take the stress off the rear section of your (aluminum) transmission housing by supporting the transfer case with this support...

    $199.99
    Add to Cart
  • Universal Removable Harness Bar w/ 2 bolt Flat Flange Option (OEM or GR) This is how you fit the GenRight harness bar to the stock roll bar. Place the harness bar tube and 2 bolt flange on stock cage and drill holes for weld-in bungs. This is how 2 bolt flange fits on tube, once cut to length. The green bar behind the front seats on the B-pillar is this bar kit. 2 bolt flat flange style.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourselfer to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Harness Bar Kit that will allow you to put it in for the big wheeling trips and/or remove it for everyday life around town. The...

    $119.99 - $199.99
    Choose Options
  • GenRight Aluminum Dash Panel Mount - Blank GenRight Aluminum Dash Panel Mount - Blank

    GenRight

    GenRight Aluminum Dash Panel Mount - Blank

    This GenRight Off Road manufactured "radio plate" plate fits where the factory radio goes in a TJ or LJ. The panel comes blank, so you can cut or drill any holes you want for switches, outlets, radios, or other accessories you have...

    $34.99
    Add to Cart
  • Twisted Pitman Arm with Removal Tool Arm is twisted for optimal geometry and range of motion from the heim rod end GenRight Twisted Pitman Arm has it's own threaded section for the removal tool Mounted here on a TJ with 5/8" hi misalignment heim on drag link Here you can see the heims are in their neutral position on the drag link

    GenRight

    GenRight Twisted Pitman Arm w/Removal Tool

      This is the innovative Twisted Pitman Arm with Removal Tool from GenRight Off Road! This will correct the stress caused by issues inherent in long travel suspension systems using heims. How? We twisted (or rotated) the drag link...

    $449.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • Rear body panel filler plate between corner guards Shown here installed between two 3/16" thick aluminum corner guards

    GenRight

    Aluminum Filler Plate for Rear Body Panel

    This is the GenRight Off Road 3/16" thick Aluminum filler plate for under the rear door on a Jeep TJ, LJ, YJ or CJ-7 to make the rear part of the body match the thickness of our corner guards. FEATURES: 3/16" thick Aluminum plate. Laser cut...

    $99.99
    Add to Cart
  • GR Round LED Lights Rear view of GR LED Round Lights

    GenRight

    GenRight LED Back Up / Rock Lights

    This is the all new SUPER bright LED light from GenRight Off Road. Fits into our existing laser cut holes in most of our bumpers, or you can drill your own and attach it with the threaded nut on the back side. Can be used as Rock Lights or Back Up...

    $99.99
    Add to Cart
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
    Add to Cart
  • TFR-1000, Jeep TJ/LJ/YJ/CJ 4" Flare Rear Tube Fenders - Steel 4" GenRight Tube Flare fitted to a set of steel Corner Guards. Jeep TJ/LJ/YJ/CJ 4" Flare Rear Tube Fenders - Steel Painted Red This is the GenRight 4" rear flare with a 40" MTR tire. Basic dimensions for the GenRight 4" wide rear tube flare in steel or aluminum

    GenRight

    Jeep TJ/LJ/YJ/CJ 4" Flare Rear Tube Fenders - Steel

    This is the 4" wide Steel Rear Tube Fender Flares from GenRight Off Road. They will fit Jeep TJ, LJ, YJ, and Jeep CJ. They are built from heavy duty 1/8" thick wall steel tubing and plate to protect your Jeep in the tightest situations, and they are...

    $499.99
    Add to Cart
  • FBB-2000 Jeep Wrangler TJ or LJ stubby front winch bumper

    GenRight

    TJ/LJ Stubby Front Bumper - Steel

    This is the GenRight Off Road heavy duty Stubby front bumper with for Jeep Wrangler TJ & LJ (Unlimited). This is our high quality, high clearance Stubby front bumper. It is perfect for your favorite trail as it will not get...

    $449.99
    Add to Cart
  • Optional C-pillar add on bar, ties the two C-pillars together Pictured here with optional tube couplers installed on each end to make it removable.

    GenRight

    Behind Seat Bar, C Pillar

    This is the GenRight behind the seat bar for any TJ, LJ, YJ or CJ GenRight cage C-Pillar. Additional tube adds strength to the rear section of the roll cage. Tony recommends on every cage.FEATURES: Cut to length (to fit GenRight FULL cage...

    $149.99
    Add to Cart
  • GenRight Half Door Bags (Pair) for the TJ half doors Designed to fit on the inside of our aluminum half door Heavy duty zippers and durable vinyl coated nylon construction Mesh pockets to hold water bottles and other easy to access accessories Mesh pockets to hold water bottles and other easy to access accessories

    PRP

    TJ Half Door Bags (Pair)

    This is the GenRight Off Road Half Door Bags (Pair) for Jeep TJ (or LJ) The perfect solution for the GenRight TJ Aluminum Half Doors! Originally made as a storage solution for Tony's own Jeep TJ, we are now making them available to the public...

    $149.99
    Add to Cart
  • King 2.0" Air Bump with Can King 2" air bump on the GenRight Elite Suspension Shown here next to a Jeep TJ frame with King 2.0 can frenched into it. Shown here with GenRight shock mount and frame plate after frenching in can Shown here on the GenRight Growler YJ

    King Shocks

    King Shocks 2.0" Air Bump w/ Can

      This is the King Shocks Brand of 2.0" diameter Air Bump (Sold Each). These are the best air bumps money can buy. This is the same air bump we used on our GenRight Growler Jeep to pre-run for 8 weeks at the Hammers for the 2010 King of the...

    $379.99
    Add to Cart
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
    Add to Cart
  • The GenRight Cage Harness Bar Kit includes aluminum side plates (as pictured) Pictured is all the parts included in the harness bar kit. Weld the tabs into place and attach the side plates. How it looks installed in the Jeep!

    GenRight

    Harness Bar Kit - TJ, LJ, YJ, CJ

    This is the GenRight B-pillar Harness Bar Kit for the GenRight Off Road TJ, LJ, YJ or CJ Full roll cage kits. It is designed to put the shoulder harness mounting points in the proper position for the driver and passenger (front 2 seats or...

    $299.99
    Add to Cart
  • RSM-2150 Rear Coil Spring correction Kit for the Jeep TJ This is the mounting location of the new brackets AFTER GenRight Coil Correction kit is installed BEFORE Coil Correction kit is installed Carefully cut off and clean the frame for the new brackets to be mounted

    GenRight

    Rear Coil Spring Correction Kit

    This is a rear coil spring mounting kit or it can be used as a coil spring correction kit On a Jeep TJ or LJ. This is a low cost way to move the coil spring back on the frame is laser cut and formed from heavy duty 3/16" and 1/4" thick steel and...

    $149.99
    Add to Cart
  • TJ/LJ/YJ Rear Bumper Plate w/ Step & Tow Points Side Profile

    GenRight

    TJ/LJ/YJ Rear Bumper Plate w/ Step & Tow Points

      This is the GenRight Rear Bumper Plate for anyone who wants the BEST departure angle possible, as it only sticks back 3/16" (the thickness of the material) behind the rear of the Jeep TJ, LJ or YJ.It is designed to beef-up your rear...

    $399.99
    Add to Cart
  • GenRight windshield guards for the Jeep Wrangler TJ or LJ Here you can see they are fitted nicely to the windshield frame Fitted nicely to the windshield frame and clean! They go all the way up to the rubber seal at the top

    GenRight

    Windshield Guards for the Jeep TJ/LJ

    This is the GenRight Off Road windshield guards for all models of the the Jeep Wrangler TJ or LJ (1997 - 2006).This newest version goes up higher than previously and are the best fitting windshield guards on the market!These are a nice way to protect...

    $249.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
72 of 329 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap