null

MADE IN THE USA

About GenRight's Suspension Systems...

• Proven quality, performance and durability.
• Utilize the GenRight gas tank to allow more room or bigger axles.
• Are weld-on for optimal bracket location(s) and so nothing hangs down.
• Move the spring and dampening control out the wheels (in the optimal position).
• Use higher quality thicker materials for long term durability.
• Use proven quality Genuine Johnny Joints (serviceable).
• Utilize Top quality coilover shocks (King, Fox or Bilstein) with GenRight’s spec valving, spring rates and hose routing.
• Are quiet because of the bind free GenRight 3 link front and 4 link rear suspension.
• Keep the steering box for optimal performance! We have our own spec ram assist kits.

• Designed around high pinion Currie axles that are custom built to GenRight’s specs for best durability and performance off-road.

100% American Made!


Turn your TJ into an LJ!

This simple kit will give you the same up travel we offer in our Tracer coil over shock suspension kit.

All parts are key notched (puzzled) to fit together and self fixture for easy assembly by the installer.

When done, your TJ will even take a factory Jeep Unlimited LJ hard top or soft top!

The GenRight Legend Kit is our original suspension designed for the do-it-yourselfer with a CJ, YJ, TJ or LJ. Available in single or double triangulated version. It allows you to do a little bit at a time, pick your own desired wheelbase, axles (brand and width), tire size and drivetrain combo.

 
The GenRight Tracer kit is geometry that was off-road race Inspired, this “system” is designed for the highest level of performance for their Jeep on AND off road. Longer wheelbase, lower center of gravity, without sacrificing suspension travel. Specifically designed for a Chevy LS3 & 4L80 transmission (or stock drivetrain), Currie axles, & Atlas transfer case.


  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height or...

    $59.99
  • Aluminum Shock Reservoir Mounting Brackets (Pair) Here you can see the mount is bolted or riveted to chassis and the shock res is hose clamped on Here you can see the mount is under the fender shock res is hose clamped on

    GenRight

    Shock Reservoir Mounting Brackets (Pair)

    This is the GenRight universal Shock Reservoir Mounting Brackets (Pair). They are Laser Cut and CNC formed from 6061-T6 Aluminum Alloy, so they will not rust. They are bolted to the body or chassis and the reservoir is hose clamped onto the mount...

    $49.99
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
  • Universal 4 Pass Power Steering Cooler Kit Here you can see how this thin cooler mounts behind the grill

    GenRight

    4 Pass Power Steering Cooler

    This is a 4 Pass cooler (8-1/8" Wide x 5" tall x 3/4" deep), that is an excellent tube-fin heat exchanger, which improves the longevity and overall functioning of your vehicle's power steering system. It installs on the low pressure (return side) of...

    $44.99
  • TABS ONLY for the GenRight Off Road's Universal Transmission Crossmember Kit 4 tabs only for the BKT-1050 Cross member kit Close up of the TABS on each side of the urethane cross member kit. TABS welded to the inside of the frame so there is clearance for your exhaust. Drop in trans cross member kit tube provides clearance for t-case yoke and exhaust pipes.

    GenRight

    Universal Transmission Crossmember TABS

    This is the four TABS only for the GenRight Universal Cross Member Kit.   Features: 4 Laser cut tabs (from the BKT-1050 kit). Includes what is pictured. 100% Made in U.S.A. Important Notes: Designed to work with GenRight Belly Up...

    $19.99
  • 4 High Quality GenRight Legend Suspension Dome Stickers

    GenRight

    GenRight "LEGEND" Suspension Dome Stickers

    This is (4) GenRight "LEGEND" Suspension DOME stickers for your Jeep. These are the perfect size for accenting your Jeep to show off the coil over suspension you have! High Quality. Chemical resistant. UV protected for long life and durability. Sold...

    $10.00