null

MADE IN THE USA

phone: (805) 584-8635

Questions? CALL US 805-584-8635

D.I.Y. & UNIVERSAL

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

144 of 206 Items
  • Hi-Steer Kit for Currie RockJock/VXR Front Axle on a Jeep CJ, YJ or TJ GenRight CrMo hi-steer set up on a Currie 60 front axle with double shear GenRight hi-steer set up on a Currie 60 with long travel coil over suspension

    GenRight

    Hi-Steer Kit for Currie Rock Jock Front Axle (Non-JK)

      This "one click" kit has everything you need to get our top-of-the-line double shear hi-steer set up on a Currie RockJock 60, RockJock 70, or Currie VXR 60 on a Jeep TJ, YJ or CJ. Includes: STK-2503 - GenRight Chromoly Drag Link Correction Kit...

    $1,499.99
    Add to Cart
  • C-Pillar Tie In Kit parts for the Jeep Wrangler YJ, hardware included. Here you can see how the C-pillar tie-in kit installs into the rear shock tower

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep YJ

    This is the GenRight Off Road C-pillar tie-in kit for the Jeep Wrangler YJ Roll Cage. It ties the bottom of the C-pillar mounting plate (through the fender well) into the side or top of the outboard rear shock mount (essentially the frame) for...

    $129.99
    Add to Cart
  • Atlas 5.0 Transfer Case, back Atlas 5.0 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 5.0:1 Transfer Case

      This is an Atlas II, 2 Speed Transfer Case with 5:1 ratio. We have run these transfer cases for years in our off road Jeeps and Ultra4 racers! We order them with the following specs: 5.0:1 ratio 1310 CV Yokes Twin stick shifters Site...

  • Atlas 3.8 Transfer Case, back Atlas 3.8 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 4.3:1 Transfer Case

      This is an Atlas II, 2 Speed Transfer Case in 4.3:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years! We order them with the following specs: 4.3:1 ratio 1310 CV Yokes Twin stick...

  • Atlas 3.0 Transfer Case, back Atlas 3.0 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 3.0:1 Transfer Case

    This is an Atlas II, 2 Speed Transfer Case with 3:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years! We order these cases with the following specs: 3.0:1 ratio 1310 CV Yokes Twin stick...

  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • Universal Removable Harness Bar w/ 2 bolt Flat Flange Option (OEM or GR) This is how you fit the GenRight harness bar to the stock roll bar. Place the harness bar tube and 2 bolt flange on stock cage and drill holes for weld-in bungs. This is how 2 bolt flange fits on tube, once cut to length. The green bar behind the front seats on the B-pillar is this bar kit. 2 bolt flat flange style.

    GenRight

    Removable Harness Bar Kit

    This is a low cost way for a do-it -yourselfer to add-on a harness bar into your Jeep's roll cage. We now offer a Universal Harness Bar Kit that will allow you to put it in for the big wheeling trips and/or remove it for everyday life around town. The...

    $119.99 - $199.99
    Choose Options
  • Jeep YJ Laser Cut Aluminum Dash w/ Switch Panel Shown installed in the legendary GenRight Growler YJ (Center Console not included) Aluminum flat dash for the Jeep YJ with Holley display and MIL Spec switches View of the YJ dash in the Growler from the drivers side.

    GenRight

    Jeep YJ Laser Cut Aluminum Dash w/ Switch Panel

      This is the GenRight aluminum dash for the Jeep YJ. Customize your Jeep YJ with GenRight's Laser Cut Aluminum Dash w/center switch panel section and master power switch. This is the same dash that was in the legendary GenRight Growler for years...

    $449.99
    Choose Options
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
    Add to Cart
  • JK Elite Front Axle Bracket Kit for RockJock 60 Lower link mount, shock mount, and limit strap mount

    GenRight

    Front Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight FRONT Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $549.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • Universal Spare Tire & Wheel Mount. The urethane isolator holds a variety of wheel sizes. Here you can see how it clamps the wheel into place.

    GenRight

    Universal Spare Tire & Wheel Mount

    This is a top quality universal spare tire mounting assembly from GenRight Off Road. It has a heavy duty 1" ACME threaded rod and giant T-handle nut are perfect to hold a spare tire in an off-road vehicle. The mounting bracket has (6) 1/4-20 Grade 8...

    $349.99
    Add to Cart
  • Threaded Step Bungs (Each) - Multiple Sizes 7/8-14 Weld in bung on a 1-3/8" x .188" wall tubing for steering tie rod and/or drag link. 1-1/4-12 Weld in bung on a 1-3/4" x .120" or 2" x .250" wall tubing) for a control arm with a flex joint or heim. 1/2-20 Weld in bung on the end of (1" x .120" wall tubing) for a sway bar link.

    GenRight

    Threaded Step Race Bungs (Each) - Multiple Sizes

    These are top quality DIY weld-in "Tube Inserts" or "Bungs" (aka; threaded insert). They are CNC machined from cold rolled (1020) steel can be MIG or TIG welded into the end of your Steering, Sway Bar, Trac Bar or Control Arm tubing. The hex head on...

    $9.99 - $21.98
    Choose Options
  • ForeverWave 18"x12" Interchangeable Flag System ForeverWave Sleeve Size Chart Interchangeable, simply zips on or off GR Flag and Sleeves sold separately American Flag and Sleeves sold separately

    ForeverWave

    ForeverWave 18"x12" Interchangeable Flag System

    This is the ForeverWave Interchangeable Flag "System" for your Jeep. We sell 2 kinds: 12" x 18" Yellow GR Flag 12" x 18" American Flag. These are nice quality American Made flags that easily zip on or off their mounting sleeve. Click on any...

    $24.99
    Choose Options
  • TJ/LJ C-Pillar Tie-In Builders Kit parts, hardware included, but not pictured. Here is how it attaches to the cage and to the frame. Looking up at the attachment point under the rear fender well. How it mounts to the top of the box at the rear most body mount.

    GenRight

    C-Pillar Roll Cage Tie In Kit for Jeep TJ & LJ

      This is the GenRight Off Road kit to tie-in the C-Pillar of your Roll Cage down to the top of the rear body mount (directly above the frame mount) for added support and safety in the event of a roll over. This is the same kit we have...

    $149.99
    Add to Cart
  • GenRight's license plate mounting plate for the center of the rear door on a TJ or LJ. TSK-2020 shown here with a license plate on it. Shown here on Andrew's LJ with optional LED-1650 license plate and 3rd brake light. Shown here on the Maxmoto Jeep LJ. Shown here on Jeep Wrangler YJ.

    GenRight

    Tailgate License Plate Mounting Plate

    This is the Tailgate License Plate mounting plate for the Jeep Wrangler (YJ, TJ & LJ) from GenRight Off Road. It simply covers the factory vent and relocates the rear license plate to the center of the rear door on a Jeep Wrangler. It is...

    $99.99
    Choose Options
  • SSV MRB3 (s) Display / Controller is fully sealed and has a back lit LED screen SSV MRB3 (s) Bluetooth System Controller w/Screen with 60W x 4 Channel Amp Shown Installed in a Jeep Wrangler TJ using the GenRight aluminum radio plate Shown Installed in a Jeep Wrangler TJ on a black GenRight radio plate The LCD display is compact.

    SSV Works

    SSV MRB3 Bluetooth Audio w/ Screen & Amp

      Looking for a weather & dust proof solution for your Jeep? Well, this is Tony's favorite! This is a surface mounted display that replaces the traditional "stereo head unit" Your Jeep's new "stereo music" will be connected via...

    $299.99
    Choose Options
  • Torco SR-5R 5W-30 Racing Oil

    Torco

    Torco SR-5R 5W-30 Synthetic Racing Oil

    Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5 utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

    $20.85
    Add to Cart
  • GST4053 and GST2053 Frame Sleeves w/ Hardware Close up of the sleeve on forward gas tank mount Sleeve shown here on tank mount. Shown here where they would go thru the frame, on each side

    GenRight

    GST4053 and GST2053 Frame Sleeves

    This is the Frame Sleeve kit for the Jeep TJ or YJ. It necessary if bolting up a GenRight gas tank through the factory frame to keep from crushing the frame when tightening to two forward bolts on the skid plate. One sleeve and bolt is used per side...

    $9.99
    Add to Cart
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
    Choose Options
  • Universal Urethane Bump Stop (Pair) w/ Bump Cans Same length as a compressed air bump stop, so you can upgrade down the road Shown here on the rear suspension with coil over shock Shown here on the front suspension set up for a coil over shock

    GenRight

    Universal Urethane Bump Stop (Pair) w/ Bump Cans

      This is the GenRight "Rock Stomper" Urethane bump stops. It is a simple and low cost solution for bump stops on a Jeep! Here is how it works: These Urethane Bump Stops fit in a KING 2.0" diameter air bump can. This allows you to...

    $299.99
    Choose Options
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Dual Phantom In-Tank Pump system from Aeromotive Assembly ready to go into the gas tank Close up on the internals on the Aeromotive dual 340 Phantom pump Close up of the top of the Aeromotive pump Close up of pump installed in GenRight tank with optional adapter

    Aeromotive

    Aeromotive Phantom Dual 340 Fuel Pump & Baffle System

    This is the Aeromotive brand Dual Phantom 340 Stealth Fuel System. This is the same fuel pump system we run on the GenRight Terremoto JKU. It is an in-tank type module which includes a foam baffle and reservoir also know as a "sump" (see pictures)...

    $947.95
    Add to Cart
  • 1.5" - 2" Tubing Couplers (Sold Each)

    GenRight

    1.5" - 2" Tubing Couplers (Each)

    This is a Tube Coupler. They are designed to be strong and perfect for use in situations where you need a removable tube. Simply weld (MIG or TIG) each side into the tube you want to remove. These couplers are meant for use with .120 wall tubing (1.5",...

    $49.99 - $54.99
    Choose Options
  • GenRight's Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit Jeep YJ/CJ Trac Bar Mount (Frame Side) Kit, shown here with tube support. Jeep YJ Trac Bar Mount (Frame Side) Kit, shown here with optional side gussets.

    GenRight

    Jeep YJ/CJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit specifically designed for the Jeep Wrangler YJ & CJ. This is the same design we have reliably run on our GenRight Jeeps for years!Front Trac Bar Bracket Kit...

    $89.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
144 of 206 Items

© 2026 GenRight Offroad All rights reserved. | Sitemap