null

MADE IN THE USA

phone: (805) 584-8635

If you have any issues placing your order, please CALL US 805-584-8635

D.I.Y. & UNIVERSAL

universaldiy.jpg

Our Universal & DIY components are all Trail Tested & Race Proven components that we have assembled into packages that allow you the freedom to suit your own needs.

Our 3-Link and 4-Link kits have optimized geometry that reduces rear steer and implements optimal anti-squat properties, with completely bind-free travel and articulation. The kits also allow you to stretch your wheelbase if you choose.

We also offer builders parts, gussets, shock mount kits, and more. Whatever it is, we have you covered.

216 of 217 Items
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

      This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the...

    $549.99
    Add to Cart
  • Teraflex Hand Throttle Kit Contents This is the typical hand throttle installation on gear shift Hand Throttle for stick shift Jeeps Hand Throttle mounted in a Jeep Wrangler YJ Closer look at mounting for the hand throttle

    Teraflex

    Hand Throttle

    This is a Hand Throttle. It is a simple lever that is mounted to the shifter of a manual transmission. It is the single best product any 4 wheeler with a stick shift (manual) transmission can buy!1) It allows the driver to apply the throttle with...

    $52.99
    Add to Cart
  • Griffin 12" x 12" universal fluid cooler Installed as Transmission cooler for GenRight Terremoto JK

    Griffin

    Griffin Universal Fluid Cooler, Small

      This is the newest style Heavy Duty "small" Griffin Aluminum Universal Fluid Cooler for use as a transmission or oil cooler.FEATURES: Compact 12.5" x 12.1" x 6.5" thick (including the cooler w/fan) size! Rugged...

    $413.00
    Add to Cart
  • Griffin 19.75 x 13" universal fluid cooler We use this larger cooler on the front of our 4500 car for cooling our transmission.

    Griffin

    Griffin Universal Fluid Cooler, Large

      This is the Heavy Duty "large" Griffin Aluminum Universal Fluid Cooler. Can be used for engine oil, transmission fluid or power steering fluid cooling.FEATURES: Overall size is 19.75" x 13" x 6.5" thick (includes cooler and fan). Actual...

    $557.00
    Add to Cart
  • Large "two hand" grab handle Large handle is ideal when mounted in the center of the dash cross bar Here you can see Dash V bar and center mounted Handle on a YJ cage

    GenRight

    Roll Cage Grab Handle (Sold Individually)

    This is a "large" cage grab handle from GenRight Off Road. This is the same handle we weld into every GenRight roll cage. Universal design, is made from 7/8" diameter tubing. These handles can be welded to any cage on any model Jeep TJ, LJ, YJ or...

    $24.99
    Add to Cart
  • Factor 55 Flat Link in Red The flatlink is available in these colors Factor 55 FlatLink Pictured here on our Terremoto Jeep JK This is how a Factor 55 Flatlink is used Prolink and Flatlink side by side

    Factor 55

    Factor 55 Flat Link

    This is the Factor 55 Flatlink. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring.   The FlatLink shackle...

    $146.00
    Choose Options
  • 1/4" Thick Extra Large Corner Gusset (Pair)

    GenRight

    1/4" Thick Extra Large Corner Gusset (Pair)

    This is a Extra Large Corner Gusset from GenRight Off Road. It is Laser cut from Heavy Duty 1/4" thick plate steel.They are perfect for any area you want to reinforce or dress up. In a cage this type of gusset can serve as a functional way to hook...

    $19.99
    Add to Cart
  • D-Ring Shackles (Pair)

    Teraflex

    D-Ring Shackles (Pair)

    This is a large D-Ring for attaching to a front or rear bumper tow point. 3/4" bolts size.Other FEATURES Include: Super Heavy Duty forged.  Silver CAD plated to prevent rust 3/4" bolt fits most bumpers on the market Sold in Pairs (2)...

    $45.99
    Add to Cart
  • Drag Link Mount for Hi Steer Arm Drag Link Mount for Hi Steer Arm

    GenRight

    Drag Link Mount for Hi Steer Arm

      This is the GenRight Drag Link Mount to correct the angle issues inherent in hi-steer set ups. We create a strong mount with double shear using a 5/8" Grade 8 bolt. This is a perfect compliment to all long travel suspensions and is...

    $89.99
    Add to Cart
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
    Add to Cart
  • Currie Enterprises Rock Jock 70 Rear Axle Currie Enterprises Rock Jock 70 Rear Axles in stock Currie Rock Jock 70 Rear Axle in the GenRight Terremoto JK The Currie Rock Jock 70 being put to the test on Pritchett Canyon in Moab, UT. We run the Currie Rock Jock 70 in our 800HP Unlimited Class off-road race car

    Currie Ent

    Currie 70 Full Float Jeep Rear Axle - Complete

    This is the Currie Extreme 70 complete REAR Axle. This is the same axle we run in our 800HP Ultra4 racer, 640HP Terremoto Jeep Wrangler JK and Bowtie Jeep TJ since 2014! This is a complete Full Float, 40 spline rear axle with NO mounting brackets...

    $10,599.99
    Choose Options
  • Currie Extreme Duty CrMo steering for the Jeep JK, 9703 Close up of the H.D. forged end used on this system Mounting bracket for the steering dampener Exploded view of the Currie rebuildable Tie Rod End. CE-9703 Currie Extreme Duty Steering Kit

    RockJock

    Jeep JK Extreme Duty CrMo Steering, Rock Jock

      This is the Currie Rock Jock Currectly nc® Extreme Duty modular tie rod and drag link steering system for all models of Jeep JK Wrangler vehicles. This CE-9703 steering kit features: 1-5/8" diameter 4130 CrMo heat treated tubing for both...

    $1,411.00
    Add to Cart
  • GenRight's Aluminum Scrambler Corner Guard Blanks for the CJ-8 Aluminum CJ-8 corners installed on a customers Jeep.

    GenRight

    CJ-8 Full Corner Guard Set - ALUM BLANKS

    This is the Aluminum version of the GenRight Off Road "Full" Corner Guard set for the Jeep CJ-8 Scrambler as a BLANK (no wheel well opening). These things are huge but will protect (or cover up) your Jeep from trail damage. These Heavy Duty...

    $1,299.99
    Choose Options
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

      This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air...

    $199.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we integrated in the lower control arm mount with bump stop pad kit. Designed to...

    $249.99
    Add to Cart
  • BMT-4001 GenRight's Hi-Clearance Body Mount Kit for the Jeep YJ Here you can see the difference between stock and GenRight's The same body mounts Tony had on his Growler YJ

    GenRight

    Body Mount LIFT Kit, YJ

    This is another innovative product from GenRight Off Road. It is a new set of Heavy Duty & Hi-Clearance body mounts to raise up the 6 mounts in the center of the Jeep (under the rocker guard) that always get hit on trail obstacles! Yes, we...

    $179.99
    Add to Cart
  • Sale
    Rear Support for an Atlas Transfer Case Support Ring on our BKT-1050 cross member kit. Here you can see the support ring installed Holding the rear of the T-case with our double triangulated 4 link rear suspension Holding the rear of the T-case with our double triangulated 4 link rear suspension

    GenRight

    Atlas Transfer Case Support Ring Kit

      This is the GenRight Atlas transfer case rear support. We run this on all our GenRight Jeeps and Ultra4 off-road race cars. Take the stress off the rear section of your (aluminum) transmission housing by supporting the transfer case with this...

    $199.99
    Add to Cart
  • Atlas 3.8 Transfer Case, back Atlas 3.8 Transfer Case, front

    Advance Adapters

    Atlas II 2 Speed 3.8:1 Transfer Case

      This is an Atlas II, 2 Speed Transfer Case with a 3.8:1 ratio. This is the same transfer case we have run in our off road Jeeps and Ultra4 racers for years!   We order them with the following specs:   3.8:1 ratio 1310 CV...

  • New Neoprene Arm Rests are slightly smaller and cooler. Great for the driver and passenger! Perfect for leaning out to see where the tire is! Padded arm rest even on JL half doors Fits in the same holes the window mounts into.

    GenRight

    Padded Arm Rest for Half Doors (Pair) Black

    This is the New & Improved Armrest from GenRight Off Road! Tired of leaning your arm on a hot / hard metal half door? Then this Jeep accessory you have been looking for! These padded arm rests are covered in wet suit material and will add...

    $149.99
    Pre-Order Now
  • GenRight's billet aluminum fairlead Haus for synthetic winch lines Billet aluminum fairlead Haus for use with synthetic winch lines GenRight's billet aluminum fairlead for synthetic winch lines

    GenRight

    GR Aluminum Winch Fairlead

    This is the GenRight Aluminum Winch Fairlead to be used with synthetic winch lines, just like we use on all the GenRight Jeeps.FEATURES  Made from 3/4" thick Aluminum alloy  CNC Machined   Recessed (flush with front...

    $99.99
    Add to Cart
  • 8" Upper Control Arm Mount (Axle Side), BKT-3280 8" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    8" Upper Control Arm Mount (Axle Side)

    This is the GenRight 8" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application.The mount is universal and can be cut or trimmed to be mounted at any height or...

    $59.99
    Add to Cart
  • 6" Upper Control Arm Mount (Axle Side) w/ Gussets, BKT-3260 6" Upper Control Arm Mount (Axle Side) Assembly

    GenRight

    6" Upper Control Arm Mount (Axle Side)

    This is the GenRight 6" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be cut down to fit any vehicle application. The mount is universal and can be cut or trimmed to be mounted at any...

    $59.99
    Add to Cart
  • Jeep TJ/LJ/YJ/CJ-7 Rear 4-Link Rear Kit Jeep on the trail with GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links Detail view of GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links

    GenRight

    Rear 4-Link Kit (Links Optional)

    Triangulated Rear 4-Link Kit for Jeep TJ, LJ, YJ & MoreBind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable Have you been thinking about building your own kit from scratch, or just upgrading to improve the ride quality of...

    $1,499.99 - $2,499.99
    Choose Options
  • Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole, Fully Welded 4 Link Rear Bracket Kit, 3 Hole installed Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    GenRight

    Rear 4-Link Rear Bracket Kit (Chassis Side) 3 Hole

    This is our original 3 hole version of the "builders" Triangulated 4 link rear suspension bracket kit. We have figured out all the mounting points for proper geometry (weight transfer, rear steer and minimal anti-squat, etc.) to make your rig...

    $449.99
    Add to Cart
  • GenRight's axle side 30 Degree lower control arm brackets Welded to the axle tube for this double triangulated rear set up Our one piece design allows for more weld surface on the axle tube

    GenRight

    30 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • 3" Upper Control Arm Mount (Axle Side), BKT-3240 Shown here welded to the top of a rear axle bridge (limit strap tab optional)

    GenRight

    3" Upper Control Arm Mount (Axle Side)

    This is the GenRight 3" tall Universal Control Arm Mounting Bracket. It is designed to be welded on the Axle Side and can be modified to fit any upper control arm vehicle application. The mount is universal and can be cut or trimmed to be...

    $44.99
    Add to Cart
  • Jeep TJ/LJ/YJ/CJ-7 Front 3-Link Kit GenRight Front 3-Link w/ Links Installed on Jeep TJ GenRight Front 3-Link w/ Links Installed on BowTie GenRight Front 3-Link Suspension Kit (Skid Plate not Included)

    GenRight

    Front 3-Link Kit (Links Optional)

     Front 3-Link Kit for Jeep TJ, LJ, YJ & More Bind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable This is the 3 Link kit from our Legend Suspension kit. It is called 3 link, but is technically a 4 link when you include...

    $1,599.99 - $2,349.99
    Choose Options
  • The 3 Link upper link mount can put on either side by the installer GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out Drivers side tacked into position on a Jeep TJ frame

    GenRight

    3 Link Front Bracket Kit

    This is the GenRight 3 link Front Bracket Kit for a Jeep Wrangler TJ, LJ or YJ (but can be made to fit the CJ-7 too).Front 3 Link Kit FEATURES: Single upper control arm (to the top of the axle) allows the installer more flexibility to locate...

    $349.99
    Add to Cart
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
    Add to Cart
  • GenRight BST-2100 "Behind the Seat" tank for Jeep TJ, LJ or JK Diagram of the BST-2100 with dimensions Close up view of gas cap and "dam" to prevent damage or spillage Optional metal cover to protect the fuel pump

    GenRight

    Universal 20 Gallon Fuel Cell

    Finally a tank specifically designed for hard core Jeeps that are no longer driven on the highway. By using this model tank it opens the entire under body area for radical rear axle relocation. It is intended to be mounted behind the driver and...

    $759.99 - $949.99
    Choose Options
  • GenRight's Axle Side 20 degree Lower Control Arm Mount One piece design allows for more weld surface to the axle tube

    GenRight

    20 Deg Lower Control Arm Brackets

    These are top quality 20 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
  • BKT-3110 lower control arm 10 degree brackets from GenRight Off Road Shown here a the rear axle tube One piece design allows for more weld surface on the axle tube

    GenRight

    10 Deg Lower Control Arm Brackets

    These are top quality 10 Degree lower control arm mounting brackets from GenRight Off Road. Heavy Duty 1/4" thick is precision formed into shape so the mounting holes line up perfectly. Unlike the old days where fabricators just welded individual tabs...

    $69.99
    Add to Cart
216 of 217 Items

© 2026 GenRight Offroad All rights reserved. | Sitemap